QCY BH23QT30A Open Ear Wireless Earphone Instruction Manual

QCY BH23QT30A Open Ear Wireless Earphone

Download the QCY app to experience the full range of features such as ambient sound modes, EQ tuning, firmware updates, and more. If your earbuds cannot connect with the  QCY app, re-install the app or update it to the latest version in your mobile app store.

Overview

Note: The images in this manual are for reference only and may vary from the actual product. Please refer to the actual product for accuracy.

Bluetooth Pairing

Initial Pairing

1. Take out both earbuds, peel off the protective film from each, and place them back into the charging case. Close the lid to activate the new device.
2. Retrieve both earbuds again.
3. Refresh your phone’s Bluetooth devices, pair with QCY Crossky GTR2, and complete the setup.

Multi-Device Connection

Steps for Multi-Device Connection

1. Power on the earbuds to initiate pairing. After connecting to Device A, turn off Bluetooth on the phone. The earbuds will enter pairing mode again.
2. Enable Bluetooth on Device B and select “QCY Crossky GTR2” for pairing.
3. On Device A, turn on Bluetooth and click the paired earbuds’ name. Successful pairing means the earbuds are now connected to both devices simultaneously.

Factory Reset
Clearing Pairing Records (Use in case of connection issues) flash white 5 times, indicating the reset is complete after the blinking stops.

• After the factory reset, follow the initial pairing method to connect for normal usage.

User Guide

1. Slide the earpiece snugly along the upper part of the earlobe, securing it behind the ear.
2. After wearing the earbuds, you can make slight adjustments by rotating to find a personally comfortable and secure position.

Note: Incorrect earbuds placement may affect both calls and hearing to varying degrees.

Earbuds Charging
While charging, the red light stays on during charging and the white light is on 10 seconds when fully charged.

Charging Case Charging
During charging: The white light flashes.
Fully charged: The white light stays on.

Charging Case Battery Status
Sufficient battery: When the earbuds are in the charging case, the white light stays on for 3 seconds before turning off.  Low battery: When the earbuds are in the charging case, the white light flashes for 3 seconds before turning off.

Controls

Warranty

Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please ensure you retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.

The manufacturer’s warranty is void under the following circumstances but not limited to:

• Improper or inadequate maintenance or modification.
• Accident, misuse, abuse, contamination, or other external causes.
• The use of unspecified adapter and accessories.
• Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
• Damages that occur as a result of one’s failure to follow the instructions.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Right earphone: FCCID: RDR-BH23QT30AR
• Left earphone : FCCID: RDR-BH23QT30AL

Safety Precautions

1. Please carefully read and retain this user manual before using the product.
2. If the product is not used for an extended period (more than 2 weeks), please recharge it.
3. You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
4. If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
5. Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
6. Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
7. Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
8. Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
9. Do not the product indicator light near the eyes of children or animals.
10. Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
11. Do not use oil or other volatile liquids to clean the product.
12. please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.

Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

Notice: This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>