PXN V3PRO Gaming Racing Wheel User Manual

PXN V3PRO Gaming Racing Wheel

Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.

System Requirements

• Supported Platform: SWITCH, PC, PS3, PS4, XBOX ONE, XBOX SERIES X&S
• PC System: Windows 7/ 8/ 10/ 11

Product Overview

Clamp Installation

The steering wheel is equipped with a screw staff and U-type clamp, which can be directly installed on a desk.

1. Step 1 Please take out the screw staff and U-type clamp.
2. Step 2 Install the screw staff into the U-type clamp.
3. Step 3 Then clip the U-type clamp to the steering wheel, as shown above.
4. Step 4 Install the steering wheel to the desk, then tighten the screw staff.

Connect with SWITCH

• Enter homepage of SWITCH, Select Setting → Controllers and Sensors → select Pro Controller Wired Connection. Please make sure that the option state is ON.

Connect with the SWITCH Console

1. Step 1 Connect the Type-C OTG and the USB cable of the steering wheel.
2. Step 2 Then plug the Type-C Adapter into the SWITCH console.
3. Step 3 Red mode indicator will remain ON when a connection is successful
   • (Note: Type-C OTG Adapter is not included)

Connect with SWITCH Dock

1. Step 1 Put the SWITCH console into the SWITCH dock and ensure a successful connection.
2. Step 2 Plug the USB cable of the steering wheel into SWITCH dock and power on the SWITCH console.
3. Step 3 Red mode indicator will remain ON when a connection is successful.

Connect with PC

1. Step 1 Plug the USB cable of steering wheel into computer. Mode indicator will remain ON when connection is successful.
2. Step 2 The steering wheel is X-input mode by default after connection. Hold and press the HOME button to change the working mode to D-input.

• Step 3 Easily change corresponding working modes when playing different games.
• X-input working mode is suitable for games ported from Xbox 360 to PC and it is plug and play.
• Recommended games are Need for Speed 13 (or versions above), Dirty series, SnowRunner, etc
• D-input mode is compatible with early PC racing games.
• Recommended games are Euro Truck Simulator 2, Assetto Corsa series, F1 series, etc.

Function Testing on PC

• Function inspection of the steering wheel is available when connecting with the PC, the specific steps are shown below: Open Control Panel → Device and Printer → Right mouse click the gamepad icon Game Controller Setting, click Properties Testing.

Connect with PS3

1. Step 1 Plug the USB cable of steering wheel into PS3 and power on PS3 console.
2. Step 2 Corresponding channel indicator will remain ON when steering wheel is connected successfully with console, then can enter the games to play or set the related functions on the console.

Connect with PS4

1. Step 1 Power OFF the original PS4 controller before connection.
2. Step 2 Use a Micro USB cable to connect PS4 original controller and the guidance port in the steering wheel.
3. Step 3 Plug the USB cable of the steering wheel into PS4
4. Step 4 Press the HOME button on the steering wheel, the red indicator will remain ON when the connection is successful.

Connect with XBOX

1. Step 1 Power OFF the original controller of XBOX ONE IXBOX SERIES X&S.
2. Step 2 Use a Micro USB cable to connect XBOX ONE XBOX SERIES X&S original controller and the guidance port in the steering wheel.
3. Step 3 Plug the USB cable of steering wheel into XBOX ONE IXBOX SERIES X&S.
4. Step 4 Press HOME button on steering wheel, red indicator will remain ON when connection is successful.

Programming Settings

Original button function can be replaced under programming setting Programming Buttons: L-paddle, R-paddle, L-pedal, R-pedal, L, R, Shifter Programming Available Buttons: A, B, X, Y, L, ZL, R, ZR

How to program?

1. Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, release the buttons when green programming indicator remains ON.
2. Step 2 Press the programming button, and the programming indicator will flash in green.
3. Step 3 Press a programming available button, setting is completed when green programming indicator is OFF.

Clear Programming Setting

1. Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, release the buttons when green programming indicator remains ON.
2. Step 2 Press the programming button, and the programming indicator will flash in green.
3. Step 3 Press the programming button again, then the green programming indicator will turn OFF, and function clearing is completed.
4. Step 4 Replug and reconnect the steering wheel, all settings will be cleared automatically.

How to set pedals as the Y axis?

1. Step 1 Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, the green programming indicator remains ON.
2. Step 2 Press the left button of the D-pad, the setting is successful when the green indicator is OFF.

Sensitivity Adjustment

3 Levels of Sensitivity Adjustments

1. Step 1 Press SHARE + OPTIONS for 3 seconds, green programming indicator remains ON.
2. Step 2 Adjust Sensitivity: Press the SHARE button to adjust sensitivity – Medium, High, Low for choices. ( Defaulted sensitivity level is medium )
3. Step 3 Save Setting : Press the D-pad UP [ ] button to save settings, programming indicator remains OFF.

Product Specifications

Warning

• Avoid strong vibration, do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the steering wheel to avoid damage.
• Avoid storing in humid, high-temperature, oily smoke and other places.
• Please handle gently when connect or remove the steering wheel.
• Children should be under adult’s supervision at all times when using this product.
• is a registered trademark of Shenzhen PXN Electronics Technology Co., Ltd
• PS4/PS3 is a registered trademark of Sony Computer Entertainment Inc.
• Xbox is a registered trademark of Microsoft Corporation.
• SWITCH is a registered trademark of Nintendo Co., Ltd.
• All trademarks are the property of their respective owner. Technical specifications are subject to change. Information contained herein is subject to change without prior notice.
• Shenzhen PXN Electronics Technology Co., Ltd. shall not be made liable for any errors that may appear. Please keep this information for later reference.
• Brand: PXN
• Model: PXN-V3PRO
• Product Name: Gaming Racing Wheel
• Country of Origin: China
• Manufacturer: Shenzhen PXN Electronics Technology Co., Ltd
• Web:www.e-pxn.com
• Support email:support@e-pxn.com
• Manufacturer Address: 1701-1706(01), Building 8, Zhongxi Xiangbinshan Garden,
• Fenghuanggang Community, Xixiang Street, Baoan District, Shenzhen, China
• EUREP GmbH
• Unterlettenweg 1a
• 85051 Ingolstadt Germany
• +49 841 8869 7744
• eurep@eurep-gmbh.com
• Prolinx Global LTD
• 27 Old Gloucester Street,
• London, WC1N 3AX, UK
• +0044 20 39661193
• eu@eulinx.eu
• is a registered trademark of Shenzhen PXN Electronics Technology Co., Ltd

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>