JEM ACCESSORIES PWC8-1038-BLK 3 In 1 Wireless Charging Power Station Instruction Manual
- September 17, 2024
- Jem Accessories
Table of Contents
JEM ACCESSORIES PWC8-1038-BLK 3 In 1 Wireless Charging Power Station
Introduction
Thank you for choosing the 3-in-1 Charging Station.
This user manual will guide you through the features and operation.
Features
Magnetic Charging Connections
Powerful magnets ensure a secure hold and perfect alignment while charging
your smartphone. Enjoy the convenience of 360° vertical or horizontal charging
positions, perfect for watching videos
All-in-One Charging
3-in-1 wireless charger is designed to power your QI-enabled smart devices.
Simultaneously charge your iPhone®, Apple Watch®, and Airpods®.
An excellent space-saving solution for both your desk, nightstand or counter
top.
Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Specifications
- Input: 5V/3A, 9V/3A
- Output 1 – Phone: 5W/7.5W/10W
- Output 2 – TWS: 5W
- Output 3 – Watch: 2.5 W
- Suitable for: iPhone 12-15 generation, Apple Watch, Airpods
- Frequency: 110-205KHz
- Size: 3.15in x 4.09in x 4.65in
What’s Inside
- 3-in-1 Wireless Charging Power Station with Light
- 39″ USB-C Charging Cable
- User Manual
Get To Know Your Product
Operation
Connect the wireless charger to a 5V/3A or 9V/3A adapter using the provided
USB-C fast charging cable.
Place your iPhone® Apple Watch®, and Apple Airpedow case in their respective
charging areas on the charger.
Ensure that your devices support wireless charging functionality before use.
LED Light
Warm Light – Cool Light – Off
Adjust the brightness of the LED light by long pressing the lamp button. The
lamp has a memory function and will restore to its previous brightness level
when switched on.
Setup & Instructions
- Connect the wireless charger to a 5V/3A or 9V/3A adapter using the provided USB-C fast charging cable.
- Place your compatible devices on their respective charging areas on the charger.
- The charging indicator will turn on when a device is detected and turn off when charging is complete.
- Use a 9V/2A or higher adapter and fast charging cable for efficient charging of three devices simultaneously.
- Do not place metal debris or magnetic cards on the charging board, as it may cause overheating.
- Slight heating during charging is normal. Keep the charger away from fire sources or corrosive environments.
- The wireless charger supports a 5W load with a 5V/2A output adapter and a 10W load with a QC3.0 standard adapter.
- For optimal performance, use PD fast charging or adapters that meet the QC3.0 standard.
Safety & Care
Read all the instructions before using the product and them store them for
future reference. Failure to follow these safety instructions, could lead to
fire, electrical shock, personal injury, property damage, or damage to the
product.
This product contains a non-replaceable rechargeable lithium-ion battery. When
discarding, follow your local / state guidelines.
- Do not expose to rain, moisture, or other liquid.
- Do use near water such as swimming pools, bathtubs, or sinks. If it becomes wet, immediately unplug the product from a power source.
- Do not handle the unit, USB cord or wall charger with wet hands.
- Do not charge, or use, the product if it has been submerged in water, of if water has got inside the product.
- Do not expose to heat sources, the sun, or leave in a hot vehicle.
- Do not dispose of in a fire.
- Do not expose the product to extremely high or low temperatures. Use this product in a location with a temperature of 32°F – 95°F. Prolonged exposure to extreme heat or cold reduces battery longevity. Exposure to fire or temperatures above 170°F could cause serious damage and explosion.
- Do not dissemble, there are no serviceable parts inside.
- Do not drop.
- Do not use if damaged or modified or if you see any bulging, swelling, leakage or other abnormality.
- Never insert objects other than the specified cables into the product.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not modify or try to use for a non-intended purpose.
- Do not use the power bank more than its output rating. Overload outputs above rating may result in a risk of fire or injury.
- Do not place anywhere where the product would become crushed or punctured.
- Place the charger on a flat, sturdy surface during charging.
- Charge in a well-ventilated area and make sure it is not covered with any material.
- Power banks generate heat when charging, and the power bank may temporarily stop charging if it gets too hot.
- Charge using the correct wall charger, and make sure that the charger is inserted all the way into the electrical outlet.
- Disconnect the charger once the product is fully charged
- This product is not a toy. Keep out of reach of children or those that require supervision.
- Do not use abrasive cleaning solvents to clean the unit.
- Note : Lithium-ion batteries will self-discharge over time.
To ensure battery life, do not store the product in an uncharged state for a length of time. If left in a discharged state for too long a lithium-ion battery will no longer have the ability to be recharged.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.