JEM ACCESSORIES XBS91058 Audio Essentials Bluetooth Speaker Headphones and Earbuds User Manual

XBS91058 Audio Essentials Bluetooth Speaker Headphones and Earbuds
User Manual
AUDIO ESSENTIALS
BLUETOOTH® SPEAKER, HEADPHONES & EARBUDS Double Sided, Black and White
XBS9-1058-SIL Manual
XBS9-1058-SIL.
855.999.8041

XBS91058 Audio Essentials Bluetooth Speaker Headphones and Earbuds

POWERING YOUR AUDIO DEVICES
For best sound performance, please be sure battery is fully charged on ‘your device before use. For best results (or to charge fast) do not use devices while charging.
CHARGING THE BLUETOOTH® PORTABLE SPEAKER
To charge your Bluetoofh® portable speaker, connect the supplied Micro USB cable into the Micro-USB charging port and connect the other end toa USB power outlet (5V adapter not included) LED indicator willilluminate RED to indicate that the speaker is
charging. Allow approximately 2 hours charging time to fully charge the speaker. When battery s fully charged, the LED will urn off.
CHARGING THE BLUETOOTH® HEADPHONES
To charge your Bluetooth® headphones, connect the supplied Micro USB cable into the Micro-USB charging port and connect the other end to a USB power outlet (5 adapter not included). The LED charging indicator willturn red, indicating that the headphones are charging properly. When the LED indicator turns of, the headphones are fully charged (To maximize the lfe of the battery, do not charge more than 2 hours)
CHARGING THE BLUETOOTH® EARBUDS
To charge your Bluetooth® earbuds, connect the supplied Micro USB cable into the Micro-USB charging port and connect the other end to a USB power outlet (5V adapter not included). Allow ‘approximately 2 hours charging time to fully charge the earbuds.

OPERATING YOUR AUDIO DEVICES

OPERATING THE BLUETOOTH® SPEAKER

1. Turn the Bluetooth® Speaker on by switching the power switch to the ON position. The LED accent ring will flash indicating that the device s in pairing mode.
2. Enable Bluetooth search mode on your Bluetooth® enabled device and select pairing name “HELIX” on your Bluetooth® device list. Once the speaker has successfully connected, the LED accent ring will continue to flash.
3. To power down the Speaker, switch the power switch to the OFF position. The LED accent ring will turn off

OPERATING THE BLUETOOTH® HEADPHONES

1. Tur the headphones on by holding the multi-function button ****for 3 seconds. The LED light indicator (4) will begin flashing blue and red
2. The headphones will enter pairing mode. Enable Bluetooth® search ‘mode on your audio device and search for pairing name “ONYX” and selectiton your audio device. Once the headphones have been successfully connected, the LED will lash blue.
3. Press the Multifunction Button ****to answer calls, pause and playand hang up call.
4. To changeto the next track, press the ****button
5. To change to the previous track, press the ****button
6. Toraise volume, press and hold the Volume + Button
7. To lower volume, press and hold the Volume – Bution
8. To power down the headphones, hold the multi-function button ****for5 seconds. The LED light indicator willflash red 3 times and remain o,
9. To use headphones from a wired audio source, plug in a 3.5mm audio cable nto the “Aux” port (Aux cable not included). The headphones will automatically switch from “Bluetooth” mode to “Auxiliry’ mode. (Please note that the music controls on the headphones will not function while in auxiliary mode).

OPERATING THE BLUETOOTH® EARBUDS

1. Turn the Bluetooth® earbuds on by holding the button for 2 seconds. There will be a startup sound and the LED indicator will begin flashing blue and red
2. The earbuds will enter pairing mode. Enable Bluetooth® search mode on your audio device and search for pairing name “ELECTRA” and select it on your audio device. Once the earbuds has successfully connected, your audio device wil state that the earbuds has been successfully connected. The LED indicator will turn of.
3. Press the button to answer calls, pause and play and hang up call
4. Toraise volume, long press Volume ” Button . To change to the nexttrack, short press the Volume “+ Button.
5. To lower volume, long press the Volume *~” Button. To change to the previous track short press the Volume “~” Button.
6. To power down earbuds, hold the button for 2 seconds, untilthe LED indicator willremain off.

SAFETY AND CARE INSTRUCTIONS

• Donotatiempt to disassemble the unit.
• Repairs o electrical equipment should only be performed by a qualified service person. Improper repairs may place user as risk and void warranty.
• Do not puncture o harm the exterior surface of the productin any way.
• Donotdrop orlet the unitfall from high places, as doing s0 may damage the device.
• Do not use this unitfor anything other than its intended user or purpose.
•  Doing so may damage the device and void warranty.
• This productis not a toy. Keep out of reach of children.
• Do not expose batteries or battery packto excessive heat or open flame.
• Do not expose the unit to extremely high o low temperatures as this will shorten the life of the device, destroy the battery, and/or distort certain parts.
• Do not use abrasive cleaning solvents to clean the unit.
• In order to prolong batery life, turn off when notin use.
• Donot use the product f it has been damaged in any way.
• Donot use the speaker for anything other thanits intended use
• Keep out of reach of children as this products not a toy.

SPECIFICATIONS

PORIABLE SPEAKER
300mah Battery
Wirelass Range: 33t
Charging Time: 2 Hours
Play Time: 2-3 Hours| HEADPHONES
250mdh Battry
Wirelass Range: 33t
Charging Tine:
2 Hours
Play Time:2-3 Howrs| MAGNETIC EARBLDS
S5meh Baltery v/ protecion
Charging Time: 2 Hours
PlayTine:2-3 Hours
Electroplatng insh
---|---|---

****WHAT’S INSIDE

Bluetooth® Speaker
Headphones
Earbuds.
31icroUSB Charging Cable
Manual

FCC CAUTION

Any changes or modifications not expressly approved by the part responsible for compliance could void this user’s authority to operate the equipment, This device complies with part 15 of the FCC Rules. Operation s subject o the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limis for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if ot installed and used in accordance with the instructions, may cause harmful nterference to radio communications.
However, there is no guarantee that nterference will not occur in a particular installation. f this equipment does not cause harmful nterference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to ty to correct nterference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment intoan outlet on a circuit different from that to which the receiver s connected
• Consultthe dealer or an experienced radio/TV technician for help.

FCC Radation Exposure Statement
“This equipment complies with FCG radiation exposure lmits set forth for an uncontrolied environment.

ONEYEAR WARRANTY

JEM warrants it products for ONE YEAR against defects in manufacturing under regular consumer use with original receipt of retail purchase. We believe in our products and want to provide you with a replacemen, if needed, but we have to know about the problem while the products still under warranty. If you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the products warranty the customer must pravide proof of the retailers receipt. *Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacementis required that is not due to a manufacturing defect JEM’s warranty s imited to our products only. Our warranty does not cover the replacement or repair cost of any thirdparty accessory, electronic  device or personal property.
For instructions about how to obtain warranty service for your product, please contact Customer Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>