JEM ACCESSORIES PWC81033 15W Wireless Charger Instruction Manual
- June 27, 2024
- Jem Accessories
Table of Contents
JEM ACCESSORIES PWC81033 15W Wireless Charger
15W Wireless Charger
AMP
Thank You For Purchasing This Product
lSW Wireless Charger with a compact design, is compatible with iOS and Android
smartphones with Qi charging capabilities.
Applicable Devices
Compatible with Qi enabled smartphones including:
iPhone® 14 Pro, iPhone® 14, Samsung Galaxy® S22, Samsung Galaxy® S22 Plus,
Samsung Galaxy® S22 Ultra, Google Pixel® 6, Google Pixel® 6 Pro, and more …
FEATURES
Qi Compatibility
Compatible with Qi enabled iOS & Android smartphones
Rapid Charging Technology
High efficiency lSW charging power for your
Qi compatible device·
LED Indicator
Built-in LED indicator illuminates blue when wireless charger is in use
Package Includes
lSW Wireless Charger, 3.28ft USB-C to USB-C Power Cable, User Manual
Technical Data
Voltage Supply
- Input: USB Type-C SV3A 9V2.22A
- Output: SW/7.SW/lOW/lSW (SVlA 9Vl.12A 9Vl.66A)
Item Number #PWCB-1033-BLK Vl.1 0324
Operation
-
Insert the USB-C end of power cable into a USB power adapter (not included) as shown below. ‘For maximum lSW charging, an 18W QC 3.0 or PD USB home charger is required (not included).
Note : iOS devices are currently limited to a max of 7.SW charging capability for standard Qi enabled wireless chargers -
Insert the USB-C end of the power cable into the USB-C port on the wireless charger. The LED indicator will flash blue and red one time then remain red to indicate power connectivity.
-
Place your smartphone device onto the center of the wireless charger. The smart LED indicator will slowly flash blue to indicate that the device is charging. For Android devices, the LED indicator will remain blue when the device is fully charged. For iPhone devices, the LED will not change.
Safety and Care Instructions
Failure to follow these safety instructions can lead to fire, electrical
shock, personal injury, property damage or damage to this unit. Make sure to
read this entire manual before
initial use.
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat sources and direct sunlight.
- Do not expose the unit to extremely high or low temperatures.
- Use the product in a location with a temperature of 32°F – 95°F.
- Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
- Do not handle the unit, USB cord, or wall charger with wet hands.
- Do not let dust or other debris accumulate on the product and the wall charger.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- If you have an electrical device, such as a pacemaker, consult a physician before using this product.
- Do not place magnetic cards or similar items near this product.
- Be sure to use the specified power source and voltage.
- Do not use a voltage converter /travel adapter.
- Be sure the wall charger is inserted all the way into the electrical outlet. When not in use, unplug the wall charger.
- Place the unit on a flat, sturdy surface during charging.
- Keep the unit out of reach of children as this product is not a toy.
CAUTION
To prevent damage to the phone or the charger:
- Remove metal cases, or cases with any magnet/metal components, from phone before charging.
- Do not place metal objects on the charger during charging.
Note: Qi wireless chargeable phones with metallic-looking finishes will charge normally. Very thick protective cases can obstruct charging. For effective charging it may be necessary to reposition the phone or remove the case.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should.be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter
Caution: Changes or Codifications not expressly approved by the party responsible for compliance could vo1dthe user’s authonty to operate the equipment
Distributed By: Jem Accessories, Inc. 32 Brunswick Ave.,
Edison, N.J. 08817
MADE IN CHINA