JEM ACCESSORIES INC XBA9-1007M Bluetooth Adapter Wireless Audio Receiver Instruction Manual

JEM ACCESSORIES INC XBA9-1007M Bluetooth Adapter Wireless Audio Receiver

INSTRUCTIONS

• Charge your new Xtreme Bluetooth Adapter fully by connecting the included Micro USB cable into the Micro USB port for a minimum of 3 hours.
• Turn on by pressing the multifunction button until the LED indicator flashes blue. Plug in headphones or stereo input into the AUX input jack. You can use the included adapter as needed.
• Unit will enter pairing mode. Enable Bluetooth search mode on your audio device and search for paring name “XBA9-1007” and select it on your audio device. Once connected, the LED indicator will slowly flash blue.
• The unit will automatically switch to phone mode when receiving calls and will switch back to music mode when the call is finished.

SAFETY AND CARE INFORMATION

Failure to follow these safety instructions can lead to fire, electrical shock,personal injury, property damage or damage to this unit. Make sure to read this entire manual before initial use.

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources and direct sunlight.
• Do not expose the unit to extremely high or low temperatures.
• Do not let the unit come in contact with water or any liquid. If it becomes wet,immediately unplug from the power source.
• Do not use the unit if damaged. To ensure safety, repairs should only be performed by a qualified technician.
• When fully charged, disconnect from charging source.
• Place the unit on a flat, sturdy surface during charging and place in a well ventilated area during charge.
• Keep the unit out of reach of children as this product is not a toy.
• Do not use abrasive cleaning solvents to clean the unit.
• To maintain battery life, charge fully before storing for an extended period of time.

FCC CAUTION

Any changes or modifications not expressly approved by the part responsible for compliance could void this user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the inere tin guarante shat inter irene ill not cur ina particularins alien. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Warning
This device complies with Innovation. Science. and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

ONE YEAR WARRANTY

Xtreme warrants its products for one year against defects in manufacturing under regular consumer use with original receipt of retail purchase.
We believe in our products and want to provide you with a replacement, if needed,but we have to know about the problem while the product is still under warranty.
If you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the products warranty the customer must provide proof of the retailers receipt.

Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. If there is not a manufacturing defect, shipping and handling will be applied.

Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device or personal property.

For instructions about how to obtain warranty service for your product, please contact Customer Service: customerservice@xtremecables.com.
Content is subject to change without prior notice. Some content may differ from how the product works with your specific device.

WHAT’S INSIDE
Bluetooth®Audio Receiver
3.5mm Adapter
Charging Cable
Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>