vtech RM5756HD Smart Wi-Fi 1080p Video Monitor User Guide

RM5756HD Smart Wi-Fi 1080p Video Monitor

“`html

Specifications

• Model Numbers: RM5756HD, RM5856HD, RM5756-2HD, RM5856-2HD

• Product Name: 5 Smart Wi-Fi 1080p Video Monitor

• Manufacturer: VTech

• Battery Information: Rechargeable Lithium-ion battery 3.7V
  5000mAh

• Power Adapters: Baby Unit Output – 5V DC 1A, Parent Unit Output
  – 5V DC 2A

Product Usage Instructions

Important Safety Instructions

Before using the baby monitor, please read and adhere to the
important safety instructions:

1. Follow all warnings and instructions marked on the
   product.

2. Adult setup is required for operation.

3. Do not install the baby unit above 6.5 feet (2 meters).

4. This product is not a substitute for adult supervision.

5. Avoid using near water sources.

6. Use only the provided power adapters to prevent damage.

7. Ensure correct orientation of the power adapter.

8. Unplug before cleaning and use a damp cloth for cleaning.

9. Avoid overloading wall outlets or using extension cords.

10. Avoid placing on unstable surfaces or obstructing
    ventilation.

Setup and Installation

Follow these steps for setting up your VTech video monitor:

1. Place the baby unit at an appropriate height below 6.5
   feet.

2. Connect the power adapter to the baby unit and plug it into a
   wall outlet.

3. Charge the parent unit using the provided power adapter.

4. Follow the pairing instructions in the user manual to connect
   the parent and baby units.

Operation

Once set up, use the baby monitor as follows:

1. Ensure both units are powered on and connected to Wi-Fi.

2. Adjust camera angle and settings as needed from the parent
   unit.

3. Monitor your baby remotely using the video feed on the parent
   unit.

4. Refer to the user manual for additional features and
   troubleshooting tips.

FAQ

Q: Can I use third-party power adapters with this product?

A: No, it is recommended to only use the provided VTech power
adapters to prevent damage or hazards.

Q: How do I clean the baby monitor?

A: Unplug the device before cleaning and use a damp cloth. Avoid
using liquid or aerosol cleaners.

“`

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.

RM5756HD RM5856HD RM5756-2HD RM5856-2HD
5″ Smart Wi-Fi 1080p Video Monitor

For more support information

Quick start guide

S m
RM5856HD RM5856-2HD

Congratulations
on purchasing your new VTech product. Before using this baby monitor, please read the Important safety instructions.

What’s in the box

Quick start guide

x 2

x 2

1 set for RM5756HD/RM5856HD 2 sets for RM5756-2HD/RM5856-2HD

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above 6.5 feet (2 meters).
4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to a bath, sink, swimming pool or shower.
7. CAUTION: Use only the internally, non-user replaceable battery fitted to the parent unit. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery in fire or a hot oven, mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal.
8. Use only the power adapters included with this product. Incorrect power adapter polarity or voltage can seriously damage the product.
Power adapter information: Baby Unit Output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Parent Unit Output: 5V DC 2A VTech Telecommunications Ltd. Model: VT07EUS05200
Rechargeable battery information: 3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd. Model: GSP806090-5Ah-3.7V-1S1P
9. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, underthe-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power adapter) should be installed near the equipment and should be easily accessible.
11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
12. Do not modify the power adapters or replace with other adapters, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source.

18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Disassembling or removing parts of the product other than via the battery door may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
20. You should test the sound reception every time you turn on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you are not intending to use it for some time.
23. Children should be supervised to ensure that they do not play with the product.
24. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.
25. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS
Cautions · Use and store the product at a temperature between 32oF
(0oC) and 104oF (40oC). · Mishandling batteries can cause burn, fire or explosion
hazards.
· Batteries should not be exposed to excessive heat such as bright sunshine or fire.
· Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.

·

Warning–Strangulation Hazard–Children

have STRANGLED in cords. Keep this cord out of

the reach of children (more than 3 ft (0.9m) away).

Do not remove warning label on the adapter cord.

· Never place the camera unit(s) inside the baby’s crib or playpen. Never cover the camera unit(s) or parent unit with anything such as a towel or a blanket.

· Other electronic products may cause interference with your camera unit. Try installing your camera unit as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients · Should keep wireless devices at least six inches from the
pacemaker. · Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

Connect, charge and power on the baby monitor
1 Connect the Parent Unit and Baby Unit to the adapter and mains supply.

2

Slide the switch to ON to power on the Baby Unit.

The Parent Unit turns on automatically after connection to the power socket.

3 For optimum reception, raise the parent unit antenna.

· Please peel off the lens/screen protector before use.

· Charge the parent unit battery before use.

· When powering up, the baby unit’s orange status LED turns on. It will turn off after a while and remain off if the status LED is set to off.

· The status LED is set to off by default. You can turn it on using the app

(Setting > Camera Setting > LED status).

WARM

· The baby unit may get warm during use. This is normal.

Download app for mobile access

US
US

Use the MyVTech Baby Plus on your mobile device to monitor your baby

PL

remotely. Follow the instructions below to set up and pair your baby monitor

with the app.

1. Scan the QR code to download the free MyVTech Baby Plus mobile app, or search “MyVTech Baby Plus” on App Store or Google Play Store. If you have previously installed the app, ensure that you have the latest version.

· Make sure your mobile device meets the minimum requirement for the mobile app.
Minimum requirement The mobile app is compatible with: · AndroidTM 9.0 or later; and · iOS 14 or later.

PL
2. Tap to launch the mobile app on your device and create an account.

3. We recommend that you use common webmail services, such as Google Gmail, to register your user account. Check your email (including the Spam folder) and activate your new account by entering the email verification code. Then, sign in to your account.

4. Ensure that you are connected to a 2.4GHz Wi-Fi network and have enabled Bluetooth and Location Service on your device.
5. After signing in to the app, select Camera(s) with Parent unit and scan the QR code displayed on the parent unit. To find the QR code, press the MENU/SELECT button and

go to

Connect to Mobile App.

6. Input the Wi-Fi password.

7. Press and hold the pair key on the baby unit for 3 seconds until you hear the beep sound to enter pairing mode.

8. Select the camera model that appears in the app and wait for the camera to connect. Once connected, it will display a live view preview.

9. Select “Continue” and create a profile for your baby (Optional). Now you can start monitoring! (For models with 2 cameras, a pop-up will ask if you wish connect another camera. Repeat steps 7-9 for the second camera.)

Use Camera Sharing to instantly share access to the camera. Follow these steps: 1. Go to Menu and select Camera Sharing.
2. Choose “Invite People” and enter the name and email address of the family member’s app account.
3. The family member will receive a pop-up notification in the app and can accept the invitation to access the camera(s).

How the system works
To receive product firmware updates, this baby monitor requires connecting to a 2.4GHz home Wi-Fi network.
Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct mode by default, which allows you to immediately stream video out of the box.

FHSS link Local access

You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to improve the signal strength. Ensure the parent unit antenna is raised for optimum reception.

Wi-Fi mode

To enhance your experience and enjoy seamless live video streaming via your mobile app, and to receive product software updates (when available), we highly recommend setting up your monitor’s Wi-Fi connection.

It uses your 2.4GHz home Wi-Fi network to connect your video monitor. It supports live video streaming through the mobile app.

Mobile access

LoFcHaSl Saclicnekss

To stream live video remotely with your mobile device, download and install the MyVTech Baby Plus mobile app. With the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video monitor system. It serves as a communicating channel between your baby unit and mobile device, allowing you to monitor and/or control your baby unit wherever you are. For more details, see Download app for mobile access section in this quick start guide.

CABLE MANAGEMENT

1

2

3

Technical specifications

Frequency
LCD Nominal effective range Power requirement

Baby unit: 2402 – 2480 MHz ( cover all WiFi, FHSS, BLE ) Max Transmit power is 10mW ( cover all WiFi, FHSS, BLE )
Parent unit: 2406 – 2475 Mhz Max Transmit power is 100mW
5” Color LCD (IPS 1280×720 pixels)
Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.
Baby unit power adapter: Output: 5V DC, 1.5A. Parent unit power adapter: Output: 5V DC, 2A. Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Disclaimer and Limitation of Liability
VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States Phone: 1 800-595-9511 in the U.S. or 1 800-267-7377 in Canada

Product Recycling Recycle this product when you are done with it. For more information, scan the QR code or visit vtechphones.com/recycle.

CONFORMS TO UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1

Android TM and Google Play TM are trademarks of Google Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Specifications are subject to change without notice. © 2023 VTech Communications, Inc. All rights reserved. 12/23. RM5756-XHD/RM5856-XHD_Gen 2_QSG_V3

Overview

Baby unit overview
1 2 3 4 5
7 8
11 12

1 Light sensor

Parent unit overview

6

2 Camera lens

3 Infrared LEDs · Allow you to see clearly in a dark environment.

4 Microphone

1
2 11
3

5 Night Light

6

Night Light Control Key

· Single Tap: Turn on/off.
· Tap and hold (with the light turned on): Adjust night light brightness.

4
5
6 12
7 15
13 8

7 LED indicator It is set to off by default. You can turn it on using the app (Setting > Camera Setting > LED status).

9

14

10

In direct mode:

1 LINK LED light

6

| | | Arrow keys

· Orange is steadily on when the baby unit is

· On when the parent unit is linked to the

· Press to navigate leftward, upward,

connecting to the parent unit.

baby unit.

rightward or downward, within the

· Orange flashes slowly during video streaming.

· Flashes when the link to the baby unit

main menu and sub-menus.

9

In Wi-Fi mode:

· Green is steadily on when the baby unit is

connected to Wi-Fi.

· Green flashes slowly during video streaming to Wi-Fi.

8 ON/OFF switch

is lost.

2

LED light

· On when the parent unit is connected to AC power, and the battery is charging.

· Flashes when the parent unit battery is low and needs to be charged.

· While viewing a zoomed image, press to move the image leftward, upward, rightward or downward.

7 Microphone

8

|

· Increase, decrease or mute the parent

9 Speaker 10 Temperature sensor

unit volume.

3 3- level sound indicator light

The lights indicate different sound levels

9

Zoom

10

11 PAIR

· To enter pairing mode, press and hold the

detected from the baby unit. · Green light: low sound level.

· Press to zoom in/out to different levels.

PAIR key for three seconds until you hear a

· Green and amber lights: moderate

beep sound. Then follow the app instructions

sound level.

10

Power | LCD ON/OFF

to connect the camera to a 2.4GHz Wi-Fi

13

network.

· Green, amber, and red lights: high sound level.

· Press and hold to turn on/off the power. · Press to turn on/off the LCD screen.

· To reset the baby unit, press and hold the

PAIR key until you hear a beep sound. Release

4 TALK /

11 Antenna

the PAIR key, and then press it again five times until you hear another beep sound. The baby

· Press and hold to talk through the baby

12 Speaker

unit will emit another beep when the reset is

unit when displays on screen.

complete. After that, the baby unit will reboot.

· While in a sub-menu, press to exit.

13 Power jack

12 Power jack

5 MENU | SELECT

14 RESET

13 Wall mount slots

· Press to enter the main menu.
· While in a menu, press to choose an item, or save a setting.

· Force reboot the parent unit. 15 Stand

Parent unit icons

Main SubMenu menu

Options

Monitoring mode (For RM5856-2HD only)

· View baby units in Single mode.

· View baby units in Patrol mode (switch view every 10 seconds).

· View baby units in Split screen.

Night light

On/Off
· Toggle the night light on or off.
Colour
· Select a night light colour. · Customised colour is available if your
baby unit is paired with MyVTech Baby Plus app.
Brightness

· Adjust the night light brightness. · Set the brightness to AUTO adaptive
ambience.
Timer

Main SubMenu menu

Options

Screen Brightness

· Adjusts parent unit screen brightness. Screen Off Timer

· Turn the screen off timer OFF, or set the screen to turn off after 1, 3 or 5 minutes when no sound is detected.
· Select AUTO to set the Sound Sensitivity level for auto screen on when a sound is detected over the set level.
Low Medium High
Temperature Format · Set the temperature display format
between Celsius or Fahrenheit.
Others · Reset settings, Software Update.
Alerts Settings

· Set the timer to turn the night light off after 15, 30 or 60 minutes, or always on.
Melodies and soothing sounds Play/Stop · Toggle between play and stop. Library
· Select to play all melodies, or play one of the five melodies or five soothing sounds.
Camera Volume
· Adjusts baby unit speaker volume. Timer
· Set the timer to stop playing after 15, 30 or 60 minutes, or play non-stop.
General settings Connect to Mobile App · Instructions for adding baby unit to mobile app. Camera Volume

· Adjust alerts volume level. Motion Detect · Turn the motion detection alert on/off. · Adjust Motion Sensitivity level for waking the parent unit screen.
Low Medium High
Temperature · Turn the temperature alert on/off. · Select the temperature alert maximum
and minimum temperature limits. Low Battery · Toggle the low battery alert on or off. Lost Link · Toggle the lost link alert on or off. Help and info Help · Support Information How-to Video · Support video System Info · System Information

· Adjusts baby unit speaker volume.

Protect your privacy and online security
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industryrecommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure. · Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-
PSK with AES” setting in your router’s wireless security menu. Change default settings. · Change your wireless router’s default wireless network name (SSID) to something unique. · Change default passwords to unique, strong passwords. A strong password:
– Is at least 10 characters long. – Is complex. – Does not contain dictionary words or personal information. – Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. · Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. · If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. · UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network.
For more information on wireless connections and protecting your data, please review the following resources from industry experts: 1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips ­
www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet ­
www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely ­
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security ­
http://www.wi-fi.org/discover-wi-fi/security.

Status icons
Direct mode Parent unit and baby unit are connected to each other directly. Signal strength is indicated by the signal icon(s) on the right. The red bar(s) indicates no connection.
Wi-Fi mode The signal icon(s) on the left indicate the baby unit is connected to a home Wi-Fi network. The red icon(s) indicates no connection.
Baby unit 1 and 2 are being viewed in Patrol mode (For RM5856-2HD only).
Baby unit 1 and 2 are being viewed in Split mode (For RM5856-2HD only).
Night vision is turned on.

Status icons
Motion detection alert is turned on. Melodies and soothing sounds are playing. Night light is turned on. Auto night light brightness is activated.
Temperature alert is turned on.
Parent unit is muted. Temperature measured at baby unit. Battery level indicator Low battery indicator

References

• Before You Connect a New Computer to the Internet | CISA
• Security | Wi-Fi Alliance
• How To Secure Your Home Security Cameras | Consumer Advice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>