LOFFLER Bizhub iSeries Print from Mac Instructions
- September 17, 2024
- LOFFLER
Table of Contents
Bizhub iSeries Print from Mac
Product Information
Specifications:
- Product: Konica Minolta Bizhub iSeries
- Function: Print Banners from MAC
Product Usage Instructions
Printing Banners from MAC:
-
Select “Allow,” then click “OK.”
-
Ensure the banner printing job screen appears. Note: Jobs
printing on paper sizes 12×18 or smaller will be discarded during
banner printing, and the machine cannot receive faxes at this
time. -
After the above settings, start printing from the
computer. -
Click on the Paper Size dropdown and choose “Manage Custom
Sizes…” -
Click “OK” and select the newly created custom size from the
dropdown for Paper Size. Exit Page Setup. -
Load the banner paper into the Bypass Tray.
-
Once loaded, select “Complete” to start printing the
banner. -
To end banner printing, select “Exit.”
FAQ
Q: What paper sizes are supported for banner printing?
A: The machine supports banner printing on paper sizes larger
than 12×18. Printing on 12×18 or smaller paper will be discarded
during banner printing.
Q: Can the machine receive faxes while printing banners?
A: No, the machine cannot receive faxes during banner
printing.
Konica Minolta Bizhub iSeries: Print Banners from MAC
This guide will cover how to print banners from a MAC.
6/7/24
1. On the Touch Panel of the machine, select Utility à Banner Printing.
2. Select Allow, then select OK.
3. Check that the screen waiting for the banner printing job has appeared.
Note: When banner printing is enabled, any jobs printing on 12×18 or smaller
will be discarded. Also, during this time, the machine cannot receive a fax.
4. When the setting above is complete, start to print from the computer.
5. Open document and click File à Page Setup
6. Click the Paper Size Drop down and select Manage Custom Sizes…
7. Click the + in the bottom left corner to add a new size. · Enter banner
dimensions and rename if desired. § Width: 11.69 inch (May vary) § Length:
45.24 inch (May vary)
8. Click OK. 9. Choose newly created custom size from
the dropdown for Paper Size. Exit Page Setup.
6/7/24
10. Go to File à Print, the updated size will now appear under Paper Handling
à Destination Paper Size.
11. Scroll down to Printer Options à Paper Tray/Output Tray à Make sure
Bypass Tray is chosen for Paper Tray and Paper Type matches what is in the
machine. · This should automatically be there due to the paper size.
12. Select OK à Execute Print.
13. Load the banner paper into the Bypass Tray.
14. When the paper is loaded, select Complete. The banner will begin
printing.
15. Select Exit to end banner printing.
6/7/24
6/7/24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>