ROSCO DMG LION LCA Lights Camera Action User Guide
- September 18, 2024
- ROSCO
Table of Contents
DMG LION LCA Lights Camera Action
Specifications:
-
Product Name: DMG LIONTM
-
Country of Origin: France
-
Control Protocols: USB-C for firmware upgrades and user profile
data -
Spot-to-Flood Zoom: Manual control with Spot and Flood Zoom
Buttons -
Connectivity: 5-PIN XLR (IN & OUT), RJ45 Ports, USB-C
Port
Product Usage Instructions:
Attaching and Detaching the Yoke:
The DMG LION Yoke features a quick-release system for easy
attachment and detachment.
-
Align the yoke with the fixture and slide it onto the circular
yoke connection points. -
Push the Locking Pins inward until you hear a click to lock the
yoke in place. -
To detach, pull the locking pins and lift the yoke off the
fixture. -
Ensure the yoke is securely locked before moving the
fixture.
DMG LION Local User Interface:
The user interface provides control over various settings and
modes.
- Power Button: Controls fixture power
- Blackout Button: Instantly dims to 0% intensity
- Settings Button: Accesses and modifies various settings
- Mode Button: Selects operating mode
- Back Button: Navigates through menus
- Display Screen: Shows current settings and menus
- Function Buttons: Select highlighted functions
- Dimming & Selection Wheel: Scrolls through values and
changes presets
Spot-to-Flood Zoom:
Use the Spot and Flood Zoom Buttons to adjust the beam angle of
the fixture.
-
Press and hold either button to move the LED engine forward or
backward. -
Release the button when you reach the desired beam angle.
-
Double-pressing either button moves the LED engine
automatically. -
Pressing either button stops the LED engine in place.
Frequently Asked Questions (FAQ):
Q: Can the DMG LION be mounted upside down?
A: No, it is important not to mount the DMG LION upside down as
mentioned in the instructions.
Q: What are the control protocols supported by the DMG
LION?
A: The DMG LION supports USB-C for firmware upgrades and saving
user profile data.
DMG LIONTM
Quick Start Guide
WHAT’S IN THE FLIGHT CASE
· DMG LION LED Fresnel · DMG LION MIX® LED Engine · DMG LION PUNCHTM LED
Engine · 13″ (33cm) Fresnel Lens
· Quick-Release Yoke · DMG LION Barn Doors · 13″ (33cm) Clear Lens · PowerCon True1 Power Cable
ATTACH THE YOKE
The DMG LION Yoke features a quick-release system that is engineered to speed
up attaching/detaching the yoke from the fixture. To attach the yoke, simply
align the yoke with the fixture and slide the rounded edges of the yoke onto
the circular yoke connection points on the fixture, then push the Locking Pins
inward until you hear the yoke lock into place. Make sure the yoke is fully
locked and connected to the fixture before maneuvering.
To detach the yoke, pull the two locking pins, then unscrew the handle and
lift the yoke off of the fixture.
IMPORTANT: Do not mount the DMG LION upside down.
Locking Pins
REMOVING/INSTALLING THE LED ENGINE
IMPORTANT NOTES: In order to open the LED Engine Hatch, the fixture needs to
be in Full-Spot, which will position LED Engine in the rear of fixture, next
to the hatchway. See the SPOT-TO-FLOOD ZOOM section below for instructions.
While opening the LED Engine Hatch will power-off the fixture, it is
recommended to manually power-off the fixture by pushing the Power Button
before removing or installing the LED Engine. To keep them clean from debris,
it is recommended that all DMG LION LED Engines be stored either inside the
fixture or inside its protective case.
Removing the LED Engine: · Power-on the fixture by pushing the Power Button
and position the
fixture’s Zoom to Full-Spot. · Power-off the fixture by pressing the Power
Button. · Open the LED Engine Hatch by turning the two captive thumbscrews at
the top of the hatch counterclockwise. · Pull the plunger above the handle and
twist the handle counterclock
wise a quarter-turn into the Open position. · Firmly pull on the LED Engine to
disengage it from the fixture and
remove it through the hatchway.
Installing the LED Engine: · Power-off the fixture by pressing the Power
Button. · Open the LED Engine Hatch by turning the two captive thumbscrews at
the top of the hatch counterclockwise. · Insert the LED Engine into the
fixture and align the hydraulic connectors
on the engine with the receivers inside the fixture as you firmly press the
LED Engine into place. · Pull the plunger above the handle and twist the
handle clockwise a quarter-turn into the Lock position. · Close the LED Engine
Hatch and turn the two captive thumbscrews at the top of the hatch clockwise.
WWW.ROSCO.COM
DMG LIONTM
Quick Start Guide
1
DMG LION LOCAL USER INTERFACE
1 Power Button
2 Blackout Button
Short Press: Immediate dim to 0% intensity. Short Press again to return to
previous intensity.
3 Settings Button
Access and modify the LED Engine, Network, User Profile, Display, and General
settings of the fixture.
4 Mode Button
Select which Mode you want the fixture to operate in. PUNCH LED Engine Modes:
White, DMX MIX LED Engine Modes: White, Color, RGBWAL, XY, LIBRARY, DMX
DMX Mode is where you will access the fixture’s DMX settings. LIBRARY is where
you will access the fixture’s GEL and SOURCE MATCH modes.
5 Back Button
Short Press: One step back in the navigation. Long Press: Locks/Unlocks all
buttons and the Dimming & Selection Wheel.
6 Display Screen
Displays the current settings, modes and menus of the fixture.
7 Function Buttons
Selects the function highlighted above/below in the Display Screen.
8 Dimming & Selection Wheel
Use the rotary knob to scroll through values on selected functions. Short
Press: Changes presets when in White, Color, XY or RGBWAL Modes.
CONTROL PROTOCOLS
Bluetooth via the myMIX® app RDM-enabled DMX 512 via 5-pin XLR (IN/OUT)
Wireless DMX/CRMX via LumenRadio Timo2 ArtNet and sACN via LAN via RJ45 (two
ports)
USB-C port for firmware upgrades and saving User Profile data.
SPOT-TO-FLOOD ZOOM
Use the Spot and Flood Zoom Buttons on the side of the fixture to manually
control the beam angle of the fixture. Press and hold either button to move
the LED engine forward or backward inside the fixture and then release once
you have the desired beam angle. Double-pressing either button will move the
LED engine automatically. Pressing either button will stop the LED engine in
place.
MADE IN FRANCE
HELPFUL QR CODES
DMG LION User Manual
DMG LION DMX Profiles
5-PIN XLR (IN & OUT)
myMIX® App
RJ45 PORTS USB-C Port
SPOT FLOOD
WWW.ROSCO.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>