ROSCO DV601 Eagle Wireless User Manual

DV601 Eagle Wireless

User Manual

Version: A
Author: Mathew Locoteta
Date: 2020-11-23
Rosco, Inc.

I. Revision History

II. Related Documents

1. Introduction

1.1 Purpose of this Document

This document is meant to be a reference to quickly understand the basic features and functions of the DV601.

1.2 Device Description

The Rosco DV601 is an AI-Enhanced dual-channel commercial grade dashcam built with driver safety in mind.

2. Key Features

The DV601 dashcam supports the following features:

1. On-device 2 Channel, 1080p @ 30FPS recording.
2. AI- Enhanced Real-Time Driver Monitoring System.
3. On-Device wireless technology: 4G, Wi-Fi, and GPS.
4. Tamper resistant construction with locking camera and bracket.
5. Micro SD expandable storage up to 1TB.

3. Camera Hardware

4. DV601 Harnessing

The DV601 is can be supplied with several harnesses to meet various applications.

1. DV665- Standard OBD II with Ignition and Turn Signals.

2. DV667- Breakout harness with all used connections.

3. DV668 – OBD II to J1939 Connector

4. DV669 – OBD II to Breakout Harness

The DV665 can be combined with the DV668 or DV669 to meet most non-OBD-II applications. If known in advance, it is recommended to use the DV667 breakout harness during installation.

5. Before Installation

Before installation of DV601 ensure the following is complete:

1. A micro-SD card is formatted to FAT32 and inserted in the micro SD Slot.
2. If necessary, contact Rosco Engineering to supply a valid device configuration for your device.
3. If using on-device 4G, make sure an activated SIM card is inserted in the SIM slot.
4. Ensure your harness matches your vehicle requirements (OBD-II, J1939, Breakout).

6. In-Vehicle Device Connection

Note: Depending on your application connect the OBD-II port on DV665 to DV668 for J1939 connector or to DV669 for breakout wiring.

7. Breakout Harness Connection Guide

For out of vehicle connection or known use direct connection it is recommended to use the breakout harness (DV667).

8. LED Indicators

The DV601 is equipped with three status indicators. Upon powering up the device should go from the “Device Bootup” state to the “Recording” state. Once in the recording state, the device will attempt to connect to RoscoLive and keep the Green LED solid. The red and yellow LEDs are used for diagnostics.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>