ROSCO DMG MINI MIX Controller User Guide

August 31, 2024
ROSCO

ROSCO DMG MINI MIX Controller

Product Specifications

  • Product Name: CRMX2 Upgrade Procedure
  • Compatible with: DMG MINI, DMG SL1, DMG MAXI
  • Manufacturer: Rosco

Product Usage Instructions

Step 1: Extract the Zip File

Step 2: Install Drivers
If it’s the first time updating with this computer:

  1. Launch lct_installer_1.exe to install the drivers.
  2. Untick the View readme file checkbox.

Step 3: Firmware Installation Program

  1. Launch DFUSec.exe on your PC.
  2. Untick the Lock LINK2 function checkbox.
  3. Set the file Step to 0 and select Crmx_Update_1-0-1.bin.

Step 4: Prepare for Upgrade

  1. Connect the MIX Controller or DMG MAXI to power and turn it OFF if it turns ON.
  2. Connect the device to the PC using a USB to Micro USB cable.
  3. Press and hold the Red Dimmer button.
  4. Press and hold the Power button while continuing to press the Dimmer button.
  5. Release the Dimmer button but keep holding the Power button.

Step 5: Start Upgrade Process
While holding the Power button, click Start on your PC to begin the upgrade process. Continue holding the Power button until completion.

Step 6: Check Log Message
Verify completion of PROGRAM STEPS in the log message.

Step 7: Display Upgrade Progress
The controller display will show the upgrade progress.

Step 8: Completion
After ~2 minutes, the upgrade will be complete. Reinstallation of MIX 2.1 Firmware is required for operation.

Step 9: Turn OFF and Close Program
Press Power button to turn OFF the device and close the firmware installation program.

Step 10: Update Firmware
Download the latest MIX 2.1 Firmware and repeat steps 1-6 using the files in the zip file.

Step 11: Verify Firmware
Check for Firmware V2.x.x file names to ensure successful reinstallation.

Frequently Asked Questions

Q: What should I do if I encounter issues during the upgrade process?
A: Contact TechSupport@rosco.com for assistance.

CRMX2 UPGRADE PROCEDURE DMG MINI™, DMG SL1™, DMG MAXI™

This instruction sheet is for updating the LumenRadio CRMX chip inside the DMG MINI, DMG SL1, and DMG MAXI fixtures to CRMX2. DMG DASH w/ CRMX fixtures can be updated to CRMX2 by updating the fixture’s firmware via the myMIX™ app.
In order to upgrade the LumenRadio CRMX chip to CRMX2, a temporary firmware needs to be installed in the DMG MAXI and the MIX Controller for the DMG MINI & SL1.
IMPORTANT: This temporary firmware is only used to upgrade the CRMX chip to CRMX². Once the firmware has been installed and the CRMX2 update is complete, the MIX 2.1 Firmware must be reinstalled to make the controller/fixture functional again.
Once the temporary firmware and drivers have been downloaded, the CRMX2 upgrade process takes about two minutes. A progress indicator is displayed during the update process.
To begin, download the CRMX2 Firmware Update.zip file to a PC (Windows 10 or higher) and follow the steps below.

STEP 1
Extract the zip file

STEP 2
If you have never updated the MIX Controller with this computer before, you will need to install the drivers.

  1. Launch lct_installer_1.exe to install the drivers.
  2. Untick the View readme file checkbox.

STEP 3

  1. Launch DFUSec.exe to open the firmware installation program on your PC.
  2. Go to File and untick the Lock LINK2 function checkbox.
  3. Make sure that the file Step is set to 0 before updating to CRMX2.
  4. Make sure that the selected file is “Crmx_Update_1-0-1.bin”

STEP 4

  1. Connect the MIX Controller or the DMG MAXI to power. If the Controller or the fixture turns ON – turn it back OFF.
  2. Connect the MIX Controller or the DMG MAXI to the PC using a USB to Micro USB cable.
  3. Push the Red Dimmer button and keep it pressed down.
  4. Push the Power button on the MIX Controller or DMG MAXI and keep it pressed down while continuing to press the Dimmer button. You should now be holding down both the Power and the Dimmer buttons.
  5. Release the Red Dimmer button but continue to press the Power button.

STEP 5
While continuing to press the Power button on the MIX Controller or DMG MAXI fixture, click Start on your PC to begin the upgrade process. Continue holding down the Power button until the process is completed.

STEP 6
Check log message to see when the two “PROGRAM STEPS” show as completed.

STEP 7
Release the Power button on the MIX Controller or DMG MAXI. The controller display will show the upgrade progress.

STEP 8
After ~2 minutes, the upgrade will be complete.

At this point, the LumenRadio CRMX chip has been updated, but the MIX 2.1 Firmware needs to be reinstalled again for the controller/fixture to be operational again.

STEP 9
Press the Power button on the MIX Controller or DMG MAXI fixture to turn it OFF, and then close firmware installation program on your PC.

STEP 10
Download the most up-to-date MIX 2.1 Firmware and then repeat steps 1-6 using the files contained in the MIX Firmware .zip file.

STEP 11
To ensure the firmware has been properly reinstalled, check for the pre- configured Firmware V2.x.x file names in the firmware installation program.

The CRMX2 Update is complete. If you have experienced any issues during the upgrade process, please contact: TechSupport@rosco.com

WWW.ROSCO.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals