THRUSTMASTER SF1000 Formula Wheel Add On Ferrari Edition Instruction Manual

SF1000 Formula Wheel Add On Ferrari Edition

“`html

Specifications:

• Product: Formula Wheel Add-On Ferrari SF1000 Edition
• Connection: Wireless
• Compatibility: Thrustmaster base

Product Usage Instructions:

1) Enable Wi-Fi Connection:

To enable the Wi-Fi of your wheel:

1. Enter the menu by pressing the E5 button.
2. Use the DPAD to navigate to the Wi-Fi enable button and press
   E7 to enable Wi-Fi.

2) Thrustmaster Connect Portal:

If the pairing between your device and the wheel succeeds:

1. Go to settings menu.

2. Select your Wi-Fi network and enter the password if
   required.

3. Click on ‘save your network’ to pair the wheel to your Wi-Fi
   network.

3) Final Check:

If you encounter a warning message at the end of the process, it
is normal as the Wi-Fi will save settings and reboot to connect to
your network. If successfully paired, the SSID parameter will
change.

4) Telemetry Settings:

To configure UDP telemetry settings:

1. In-game, go to game options and settings.

2. Select the appropriate UDP format based on your game version
   (2020, 2021, 2022, or 2023).

3. Enter your wheel IP address and select the desired frequency
   (20Hz, 60Hz, or 120Hz).

5) Enter Your Wheel IP in the F1 Game:

Based on the game version (2023 or 2024), follow the steps
mentioned above to configure UDP telemetry settings
accordingly.

Frequently Asked Questions (FAQ):

Q: What should I do if I encounter an error message during the

Wi-Fi pairing process?

A: If you see an error message, do not worry. It is normal as
the wheel saves settings and reboots to connect to your network.
Just follow the process as instructed.

Q: How do I know if my wheel is successfully paired to my

network?

A: If the pairing is successful, you will notice that the SSID
parameter changes from ‘wheel identifier’ to ‘your network
name’.

“`

Formula Wheel Add-On Ferrari SF1000 Edition Wireless Connection Tutorial Wi-Fi Pairing & UDP configuration

PRELIMINARY STEP
MAKE SURE TO UPDATE YOUR DRIVER AND FIRMWARE OF YOUR BASE

COMMANDS & SCREEN NAVIGATION

: Navigate in menu (DPAD) : Change Skin (turn left or right) : Menu (push) : Change Screen (turn left or right) : Dark/Bright Mode (push) : Change menu parameter (turn left or right) : Validate menu parameter (push) : Switch ON LED+LCD (Toggle up) : Switch OFF LED+LCD (Toggle down)
Display buttons assignment

DPAD

E5

E6

E7

1. ENABLE WI-FI CONNECTION

To enable the Wi-Fi of your wheel:

a. First, enter the menu by pressing the E5 button ( ).

b. Then using the DPAD ( ), go right ( ) to the Wi-Fi

enable button (

).

c. Finally press the E7 ( ) button to enable Wi-Fi it the

circle will move to the right (

).

DPAD

3. THRUSTMASTER CONNECT PORTAL
   If the pairing between your device and the wheel succeed you will arrive on the: “Thrustmaster Connect portal”
   a. Go to settings menu
   b. Go the selection list and choose your favorite Wi-Fi
   c. Once selected, if there is a password, type it in the box and click on `save your network’
   d. The wheel will now try to pair to your Wi-Fi network

4. FINAL CHECK

Error message : don’t worry
At the end of the process, you may encounter a warning message ` impossible to access to the
page’.
It is because Wi-Fi will save setting then reboot to connect to you network.
Don’t worry and follow the process

If you succeed to pair the wheel to your network, you will notice the SSID parameter changed from wheel identifier’ toyour network name’

5. ENTER YOUR WHEEL IP IN THE EA SPORTS F1® 2020,2021,2022 GAME

A

B

In Game, go the game options
C
Go to Settings

10.53.100.127
10.53.100.127

• Telemetry is a set of data such as (brake temperature, fuel load, tyres wear…) ** UDP (User Datagram Protocol) is a protocol commonly use to exchange data between PC/Console and a device

Go to Telemetry* Settings
D
Switch ON the UDP** Telemetry Enter your wheel IP Select 20Hz Select UDP format 2020 even if you are using 2021 or 2022 game

5. ENTER YOUR WHEEL IP IN THE F1 2023 GAME
   B A
   In Game, go the game options
   C
   Go to Settings

10.53.100.127

Go to Telemetry* Settings
D
Switch ON the UDP** Telemetry Enter your wheel IP Select 120Hz Select UDP format 2023

• Telemetry is a set of data such as (brake temperature, fuel load, tyres wear…) ** UDP (User Datagram Protocol) is a protocol commonly use to exchange data between PC/Console and a device

5. ENTER YOUR WHEEL IP IN THE F1 2024 GAME
   B A
   In Game, go the game options
   C
   Go to Settings

10.53.100.127

60 Hz

• Telemetry is a set of data such as (brake temperature, fuel load, tyres wear…) ** UDP (User Datagram Protocol) is a protocol commonly use to exchange data between PC/Console and a device

Go to Telemetry* Settings
D
Switch ON the UDP** Telemetry Enter your wheel IP Select 60Hz Select UDP format 2023 even if you are using 2024 game

OWN THE RACE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>