Savio BS-041, BS-042 Bluetooth Speaker User Manual

Savio BS-041, BS-042 Bluetooth Speaker

Specifications:

• Model: BS-041 / BS-042
• Automatic shutdown after 10 minutes of inactivity

Product Information

Product Diagram:

• Power ON / OFF button
• Play / Pause button
• Next track / Volume button
• Previous track / Volume button
• LED light modes button
• USB-C charging port
• MicroSD card slot
• Lanyard

Charging:

Before charging, disconnect all devices and cables to prevent damage.

1. Connect the USB-C cable to the charging port on the speaker.
2. A red LED on the front panel will indicate that charging is in progress.
3. Once fully charged, the LED will turn off.

Speaker Pairing:

1. Press the power button for 2 seconds to turn on the speaker.
2. Turn on Bluetooth on your device and select SAVIO BS-041 / BS-042 from available devices.
3. If previously paired, the speaker will connect automatically.

Button Description:

• Turn on / off button
• LED light modes button
• USB-C charging port
• MicroSD card slot

Modes Description:

Bluetooth Mode:

1. The speaker enters Bluetooth mode automatically when turned on.
2. Pair with your device by selecting SAVIO BS-041 / BS-042 from Bluetooth settings.
3. Speaker will pair automatically with the last connected device.

MicroSD Mode Function:

1. Insert MicroSD card into the slot for automatic playback.

FM Mode:

1. To enter FM mode, single press the button.
2. Press play / pause button to search for channels.
3. After scanning, it will return to the first channel found.
4. Change channels using the buttons.

Frequently Asked Questions (FAQ):

• Q: How do I know when the speaker is fully charged?
  A: The red LED indicator on the front panel will turn off when the speaker is fully charged.

• Q: Can I use the speaker while it is charging?
  A: Yes, you can use the speaker while it is charging.

• Q: How do I switch between different modes on the speaker?
  A: Use the designated buttons to switch between Bluetooth, MicroSD, and FM modes.

Bluetooth speakermodel: BS-041 / BS-042

User manual

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write to us at support@savio.pl

Thanks to your feedback, we will be able to better adapt the prod-uct to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

Package content:

• Bluetooth speaker SAVIO BS-041 / BS-042
• Charging cable USB-A (M) – USB-C (M)
• User manual

Product diagram:

1. Power ON / OFF button
2. Play / Pause button
3. Next track / Volume button
4. Previous track / Volume button
5. LED light modes button
6. USB-C charging port
7. MicroSD card slot
8. Lanyard

Charging:

To start charging:

1.  Connect the USB-C cable  to the charging socket  in the speaker ⑥.
2. The red diode on the front panel will glow to indicate that the speaker is charging.
3. When the speaker is fully charged, the di-ode will turn off.

Speaker pairing:

1. Press the button for 2 seconds to turn on the speaker.
2. Turn on the Bluetooth in the  device, choose SAVIO BS-041 / BS-042 speaker from Bluetooth devices. If the speaker have already been paired with the device, it will be connected automatically. After proper connection you will hear “Connected successfully”.
3. Speaker is ready to use.

 Button Description:

Turn on / off button

• Press and hold for two seconds to turn the device on / off.

Volume regulation/track change button

• Single press: next track.
• Press and hold: volume up.

Volume regulation/track change button

• Single press: previous track.
• Press and hold: volume down.

Play / Pause button

• Single press while playing music: play / pause track.
• Single press while incoming call: receiving the call.
• Single press while calling: terminating the call.

LED light modes button

• Each successive press of the button changes the speaker backlight mode.
• Press and hold for 2 seconds to turn off the backlight mode.

 Modes Description:

Bluetooth mode:

1. The speaker enters Bluetooth mode automatically when turned on.
2. Turn on the Bluetooth function of the device you wish to connect and search for SAVIO BS-041 / BS-042 from the list of found devices, select SAVIO BS-041 / BS-042.
3. Speaker will pair automatically with the last connected device.

MicroSD mode function:

1. Insert the MicroSD card into the slot.
2. Speaker will automatically start playing music files from the MicroSD card slot.

FM mode

1. To run the FM mode:
2. Single press the button to turn on the FM mode.
3. Short press the play / pause button to start searching for channels.
4. After scanning all frequencies, it will return to the first channel found.
5. The channel is changed by pressing once ( -/ +).
6. Single press the button to turn back to the Bluetooth mode.

Note: After 10 minutes of inactivity, the speaker will turn off automatically.

Specification:

• Bluetooth version: 5.0
• Output power: 5 W
• Bluetooth range: 10 m
• Impedance: 4 Ω
• Battery type: Li-ion 3.7 V, 1200 mAh
• Power supply voltage: 5 V, 500 mA
• SNR: ≥ 80 dB
• Frequency response: 70 Hz – 18 kHz
• Maximum SD card capacity: 64 GB
• Frequency band in which the radio equipment operates: Bluetooth 2400 MHz – 2483.5 MHz
• Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 4 dBm
• Working time: Up to 5 h
• Charging time: Up to 4 h
• IPX waterproof rating: IPX4
• Dimensions: 95 x 95 x 82.5 mm
• Weight: 328.5 g

 Safety conditions:

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to excessive moisture, heat or sunlight, do not use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Do not listen to loud music in a long period of time, because it may result in hearing loss.
• If the playback error occurs, immediately turn off the speaker and disconnect all the devices and cables to prevent the speaker and other components from damage.

Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at Aleja Żołnierzy I Armii Wojska Polskiego 20B, 35-301 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., Aleja Żołnierzy I Armii Wojska Polskiego 20B, 35-301 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14.

Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of the Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR.

The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 Sections 1 and 4 of the GDPR of April 27, 2016.

Information of the utilization of electrical and electronic equipment and batteries

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area.

Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesions of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protection by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Warranty:

The producer provides a warranty for a period not shorter than the applicable legal requirements in the country where the product was purchased. Detailed information regarding the warranty is available for download at: www.savio.pl/en/service-and-support

PRODUCER

www.savio.pl

References

• Ceneo - porównanie cen, sklepy internetowe - kup najtaniej

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>