LEDVANCE MR16 Transformer Compatibility Light Owner’s Manual
- June 10, 2024
- LEDVANCE
Table of Contents
LEDVANCE MR16 Transformer Compatibility Light
Product Information
The product is an MR16 lamp that is compatible with transformers. The product code for the lamp type contains 7 letters and digits and starts with the letter “A”. The user manual provides a list of transformers that have been tested in laboratory conditions and are compatible with the product. The chart in the manual provides information about the compatibility of the lamps with the transformers listed, and it is categorized into three types: good compatibility (green), limited compatibility (yellow), and undesired compatibility (red).
Product Usage Instructions
- To find the product code for your lamp type, refer to the label on the product. The product code contains 7 letters and digits and starts with the letter “A”.
- The maximum number of lamps that can be installed on one transformer varies depending on the transformer model. Please refer to the chart in the user manual to determine the maximum number of lamps that can be installed on your transformer.
- The chart in the user manual provides information about the compatibility of the lamps with the transformers listed. To read the chart, locate your transformer model in the left-hand column and identify the lamp type you are using. The chart will indicate whether the compatibility is good (green), limited (yellow), or undesired (red).
- Make sure to use a transformer that has been tested in laboratory conditions and is listed in the chart for optimal compatibility.
- Please note that the actual number of lamps that can be installed on a transformer may vary from the calculated result in the chart.
TRANSFORMER COMPATIBILITY MR16
BASIC INFORMATION
-
WHAT IS THE PRODUCT CODE AND WHERE DO I FIND IT?
The product code describes the lamp type. It contains 7 letters and digits and is starting with “A”. Below is an example of the product code of the stamp of the lamp:
-
HOW MANY LAMPS CAN I INSTALL ON ONE TRANSFORMER?
For max. number of lamps on a transformer, please use the following rule of thumb: (Please note: Actual number may vary from the calculated result) -
HOW CAN I READ THE FOLLOWING CHARTS?
Legend
- Information about the compatibility of the lamps. Green means good compatibility, yellow means limited compatibility, and red means undesired compatibility.
- List of transformers tested in laboratory conditions.
- Information about the lamp type.
- Assessment of the results into categories. Includes the number of lamps.
TRANSFORMER COMPATIBILITY MR16
Please Note
- The compatibility list is based on testing conducted by the manufacturer in a lab-simulated environment, and the results can vary in certain field applications due to a number of factors. LEDVANCE does not take over any responsibility, warranty, or liability that this results can also be achieved by using the devices under other conditions, when using successor models of the tested devices, or different models of the same manufacturer, or when using other LED lamp types.
- The absence of a dimmer from this chart does not necessarily imply incompatibility.
- Please reference the dimmer manufacturer’s instructions for installation.
- The operation of non-dimmable LED lamps on dimming devices is not permitted.
- LED lamps contain several electronic components. Under unfavorable conditions, these can lead to acoustic noise. In the case of resonance, even low noise can cause an audible effect. Possible factors influencing this are the installation, the design of the lamp holder, and the luminaire (acoustic resonance effect) as well as the dimmer or the transformer (harmonic or electronic resonance).
- Subject to change without notice.
- Errors and omissions excepted.
- Always make sure to use the most recent release.
LEDVANCE GmbH
Head Office
- Parking 29-33
- 85748 Garching, Germany
- Phone +49 89 780673-100
- Fax +49 89 780673-XXX www.ledvance.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>