POLAR CH479-A 15kg Ice Maker Instruction Manual

: September 16, 2024
: Polar

Table of Contents

CH479-A 15kg Ice Maker
Specifications:
Product Information:
Installation:
Operation:
FAQ:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CH479-A 15kg Ice Maker

Specifications:

Product: 15kg Ice Maker
Model: CH479-A
Telephone Helpline: 1300225960

Product Information:

The ice maker is designed to make ice and should not be used as
storage for preserving foods or drinks. It is essential to follow
the correct maintenance and operation procedures to ensure optimal
performance.

Installation:

Remove the appliance from the packaging and remove all
protective films from the surfaces.
Maintain a minimum clearance of 2.5cm between the unit and
walls or other objects, with a minimum of 20cm clearance on the
top. Avoid placing it next to heat sources.
Adjust the screw legs to ensure the ice maker is level for
efficient performance.

Operation:

Control Panel:

Ice cube size indicator: Press the SELECT button to choose the
desired ice cube size.
Ice making cycle: The cycle takes between 7-18 minutes based on
the selected cube size. Larger cubes will take longer to
produce.
Water Low Indicator: If the water level is low, the indicator
lights up, and the appliance stops working. Refill the water tank
to restart the appliance automatically.

FAQ:

Q: Can the ice maker be used as a storage unit for food
or drinks?

A: No, the ice maker is specifically designed
for making ice and should not be used for storage purposes.

Q: How long does it take for the ice maker to produce
ice?

A: The ice making cycle typically takes between
7-18 minutes, depending on the selected cube size. Larger cubes
will take longer to produce.

15kg Ice Maker
Instruction manual

$)”@”@W@JOEC

Model: CH479-A

EN

Telephone Helpline: 1300225960

Safety Instructions

· ONLY use drinking or potable

· Position on a flat, stable

water when making ice

surface.

cubes.

· A service agent/qualified

· For indoor use only.

technician should carry out · Replace any unused water in

installation and any repairs

the tank at least once every

if required. Do not remove

24 hours.

any components or service · Keep all packaging away

panels on this product.

from children. Dispose of

-In Queensland the

the packaging in accordance

service agent/qualified

with the regulations of local

technician MUST hold a

authorities.

Gas Work Authorisation · This appliance can be used

or License for

by children aged from 8 years

hydrocarbon refrigerants and above and persons with

if the appliance gas

reduced physical, sensory

system is being opened

or mental capabilities or

or charged.

lack of experience and

· Consult Local and National

knowledge if they have

Standards to comply with the been given supervision or

following:

instruction concerning use of

– Health and Safety at Work

the appliance in a safe way

Legislation

and understand the hazards

– Fire Precautions

involved.

– IEE Wiring Regulations

· Children shall not play with

– Building Regulations

the appliance.

· DO NOT immerse in water, · Cleaning and user

or use steam/jet washers to

maintenance shall not be

clean the unit.

made by children without

· DO NOT cover the appliance supervision.

when it is operating.

· If the power cord is damaged,

· Always carry, store and

it must be replaced by a POLAR

handle the appliance in a

agent or a recommended

vertical position.

qualified technician in order to

avoid a hazard.

2

$)”@”@W@JOEC

Telephone Helpline: 1300225960

AENU

· POLAR recommend that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
· This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – catering and similar nonretail applications.
· Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
· When positioning the appliance, ensure the supply cord is not trapped or damaged.

· WARNING: Do not locate multiple portable socketoutlets or portable power supplies at the rear of the appliance.
· Do not run the power cord carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas, and do not submerge in water.
· Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
· We do not recommend the use of an extension cord, as it may overheat and lead to a risk of fire. Unplug the ice maker before cleaning, making any repairs or servicing.
Warning: Risk of Fire flammable materials
· Refrigerant R600a / R290, is natural gas with high environmental compatibility, but also combustible. When transporting and installing, ensure that no parts of refrigerating circuit are damaged.

3

$)”@”@W@JOEC

EN

Telephone Helpline: 1300225960

· Refrigerant leaked from the refrigerating pipes could ignite. If leaking is detected, to avoid any potential source of ignition (spark, naked flames, etc.), please open window or door, and keep good ventilation.
· Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
· Warning: Keep all ventilation openings clear of obstruction. Unit should not be boxed in without adequate ventilation.
· To comply with AS/NZS 60079.10.1:2009: Ensure there are not sources of ignition in any area where refrigerant could gather in the event of a leak.
· Electrical equipment should not be placed under the vent or where refrigerant could gather in the event of a leak.
· Warning: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

· Warning: Do not damage the refrigerant circuit.
· Warning: Do not use electrical appliances inside the food storage compartments of the appliance.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your POLAR product.
The ice maker is designed to make ice and should not be used as storage to preserve foods, drinks, etc.
Pack Contents
The following is included:
· Ice Maker · Removable ice basket · Ice scoop · Instruction manual
POLAR prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your POLAR dealer immediately.
Installation
Note: Not for use in vans or trailers, food trucks or similar vehicles.
If the unit has not been stored or moved in an upright position, let it stand upright for approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging and remove the protective film from all surfaces.
2. To optimize performance and longevity, ensure a minimum clearance of 2.5cm is maintained between the unit and walls and other objects, with a minimum 20cm clearance on the top. NEVER LOCATE NEXT TO A HEAT SOURCE.
3. If necessary, adjust the screw legs of the ice maker to make it level. The efficiency of the ice maker can be reduced if the appliance is unevenly located.

4

$)”@”@W@JOEC

Telephone Helpline: 1300225960
Operation
Control Panel
Ice cube size indicator

AENU
3. Press the SELECT button repeatedly to scroll through the ice cube sizes. Stop when the required size is illuminated.
Note: The ice making cycle takes between 7-18 minutes, depending on the size of cube selected. Larger cubes will take longer to produce.

4. The appliance will run a startup routine and then begin ice production.

Note: If the water level is too low, the Water Low indicator lights up and the appliance stops working. Fill the water tank and the appliance will restart automatically.

5. When the cubes reach the ice sensor the appliance will stop production. Production resumes once ice has been removed.
6. Press the STOP button at any time to halt the ice making process.

Power switch: This switch can control the mains power supply of the appliance.
Making Ice
Note: Before using for the first time, clean the water tank, ice basket and ice basket shelf. Use the first 3 ice making cycle to flush out the system. Discard the water and ice created from the first 3 cycles.

Cleaning, Care &
Maintenance
· Always switch off and disconnect the power supply before cleaning.
· Warm, soapy water is recommended for cleaning. Cleaning agents may leave harmful residues. DO NOT wash the base unit, instead wipe the exterior with a damp cloth.
· Clean the water filter regularly with a small brush, particularly in hard water areas. The water filter is located in the pump inlet at the bottom of the water tank, and can be removed by pulling out with fingers.

Each time the appliance is refilled, the first

ice making cycle is used to reduce the water

temperature. This results in uneven ice cube

production which is perfectly normal. You may wish

to discard ice created in the first two production

cycles.

· If the appliance is to be left unused for longer

1. Lift the access lid and fill the water tank up the level of the ice basket shelf.
2. Connect the appliance to the power and press the START button.

than 24 hours, loosen the drain screw and drain the water from the tank. · The inner removable parts and water tank should be cleaned regularly.

5

$)”@”@W@JOEC

EN

Telephone Helpline: 1300225960

Descaling
For the best water quality, Polar recommend that a water filter is installed to the mains water supply, particularly in hard water areas. Doing so will reduce the build up of limescale and contaminants in the water tank thus maintaining energy efficiency and prolonging the life of the appliance.
To de-scale the appliance: · Switch off and disconnect the power supply. · Remove the ice basket and water filter for
cleaning. · Add dilute cleaner into the water tank. (Note:
Choose ice maker specific cleaner and follow the manufacturer’s instructions.) · Clean the water box, evaporator (metal) and water tank with a soft brush.

Water box

Evaporator

· Loosen the drain screw to drain the solution. · Flush out the system thoroughly with clean
water to remove any cleaner residue. · Re-locate all removable parts.
Note: After descaling, use the first 3 ice making cycles to flush out the system. Discard the water and ice created from these initial cycles.
POLAR recommend this appliance is descaled monthly or more frequently in hard water area.
To avoid contamination of ice, please respect the following instructions: · Opening the door for long periods can cause a
significant increase of the temperature in the compartments of the appliance. · Clean regularly surfaces that can come in contact with ice and accessible drainage systems. · Clean water tanks if they have not been used for 48h. · If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

Troubleshooting
A qualified technician must carry out repairs if required.

Fault The appliance is not working
Appliance is noisy or works intermittently Ice cubes are sticking together
Compressor runs but no ice is made

Probable Cause

Solution

The unit is not switched on

Check the unit is plugged in correctly and switched on

Plug or lead is damaged

Replace Plug or lead

Mains power supply fault

Check mains power supply

Power fluctuations

Turn off the ice maker and restart after 3 minutes

Ice making cycle is too long

Reset the ice cube size and restart the appliance

Water tank temperature is too low Empty water tank and refill

Refrigerant leak or block in the refrigerant system

Consult a qualified technician

6 $)”@”@W@JOEC

Telephone Helpline: 1300225960

AENU

Fault

Probable Cause

Solution

Water low Water level is low or tank is empty Refill water tank and restart

indicator is lit Water filter is blocked

Clean water filter and restart appliance

Ice Full

Ice basket full

indicator is lit Room temperature is too low

Water and Ice Water box is blocked and cannot

Full indicators tilt flash together

Ice full indicator flashes once every 4 seconds
Ice full indicator flashes twice every 4 seconds
Ice full indicator flashes thrice every 4 seconds
Ice cubes are melting

Condenser sensor fault
Ice full sensor fault
High condenser temperature due to fan fault Leaving ice in the appliance for too long time

Empty the ice basket
Move the appliance to a warmer position
Disconnect from the power supply. Remove some of the ice cubes and gently tilt the water box by hand. Restart the appliance after 3 minutes
Check the sensor connection. If normal, consult a qualified technician
Check the sensor connection. If normal, consult a qualified technician
Check the fan connection. If normal, consult a qualified technician
Transfer ice cubes to a freezer

Technical Specifications

Note: Due to our continuous improvement process, the product specifications are subject to change without notice.

Model

Voltage

Power

Current

Water Tank Volume

Bin Storage

Max. Ice Making Capacity

CH479-A 220-240V~ 100W

1.08A

3.9 litres

2kg

15kg/24 hours

50Hz

Model CH479-A

Refrigerant R600a 28g

Dimensions H x W x D mm
414 x 360 x 398

Weight 15.2kg

Ice making capacity (kg/24h) 14.79 13.5 12.12 8.56 15.44 13.9 12.29 8.79

Ice making time (min) 13.29 14.32 17.03 23.2 13.22 14.3 16.65 23.08

Water temperature (°C) 10 10 10 10 5 5 5 5

Ambient temperature (°C) 20 25 30 43 20 25 30 43

7

$)”@”@W@JOEC

EN

Telephone Helpline: 1300225960

Electrical Wiring

The plug is to be connected to a suitable mains socket.
POLAR appliances are wired as follows: · Live wire (coloured brown) to terminal marked L · Neutral wire (coloured blue) to terminal marked N · Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.
POLAR parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
POLAR products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of POLAR.
Every effort is made to ensure all details are correct at the time of going to press, however, POLAR reserve the right to change specifications without notice.

8 $)”@”@W@JOEC

DocuSign Envelope ID: 9B553A82-5955-442D-A8CE-F1E669F04AAC

DECLARATION OF CONFORMITY
· Conformiteitsverklaring · Déclaration de conformité · Konformitätserklärung · Dichiarazione di conformità · · Declaración de conformidad

Equipment Type · Uitrustingstype · Type d’équipement · Gerätetyp

· Tipo di apparecchiatura · Tipo de equipo

C-Series Countertop Ice Machine 11kg Output

C-Series Countertop Ice Machine 15kg Output

Application of Territory Legislation Low Voltage Directive (LVD) – 2014/35/EU

& Council Directives(s)

Electrical Equipment (Safety) Regulations 2016

Toepassing van Europese

(BS) EN 60335-1:2012 +A11:2014 +A13:2017

Richtlijn(en) · Application de la/des +A1:2019 +A14:2019

directive(s) du Conseil · Anwendbare (BS) EN 60335-2-24:2010 +A1:2019 +A2:2019

EU-Richtlinie(n) · Applicazione delle +A11:2020

Direttive

(BS) EN 62233:2008

· Aplicación de la(s) directiva(s) del

consejo

Electro-Magnetic Compatibility (EMC) Directive

2014/30/EU – recast of 2004/108/EC

Electromagnetic Compatibility Regulations 2016

(S.I. 2016/1091)

(BS) EN IEC 61000-6-1:2019

(BS) EN 61000-6-3:2007 +A1:2011

Model · Modèle · Modell · Modello · Modelo CH478 (-E & -A) CH479 (-E & -A) Electrical Safety IEC 60335-1:2010 +A1:2013 +A2:2016 IEC 60335-2-24:2010 +A1:2010 +A2:2017 EN 62233:2008
Electromagnetic Compatibility EN IEC 61000-6-1:2019 EN 61000-6-3:2007 +A1:2011

Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012/3032)

Manufacturer Name · Naam fabrikant · Nom du producteur · Name des Herstellers · Nome del produttore · Nombre del fabricante

Polar

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s). Ik, de ondergetekende, verklaar hierbij dat de hierboven gespecificeerde uitrusting goedgekeurd is volgens de bovenstaande Richtlijn(en) en Standaard(en). Je soussigné, confirme la conformité de l’équipement cité dans la présente à la / aux Directive(s) et Norme(s) ci-dessus Ich, der/die Unterzeichnende, erkläre hiermit, dass das oben angegebene Gerät der/den oben angeführten Richtlinie(n) und Norm(en) entspricht. Il sottoscritto dichiara che l’apparecchiatura di sopra specificata è conforme alle Direttive e agli Standard sopra riportati. El abajo firmante declara por la presente que el equipo arriba especificado está en conformidad con la(s) directiva(s) y estándar(es) arriba mencionadas.

Date · Data · Date · Datum · Data · Fecha · Data Signature · Handtekening · Signature · Unterschrift Firma · Firma

13th January 2023

Full Name · Volledige naam · Nom et prénom · Vollständiger Name · Nome completo · Nombre completo

Ashley Hooper

Eoghan Donnellan

Brendan Denmeade

Position · Functie · Fonction · Position · Qualifica · Posición

Technical & Quality Manager

Commercial Manager/ Commercial Manager/ Responsible

Importer

Supplier

Manufacturer Address · Adres fabrikant · Adresse du producteur · Anschrift des Herstellers · Indirizzo del produttore · Dirección del fabricante