Haier 40E3500 LED Television User Manual

June 13, 2024
Haier

Haier 40E3500 LED Television

Haier 40E3500 LED Television

IMPORTANT SAFETY INSTRUCTION

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this Television near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings, install in accordance with the instructions.
  8. Do not install near any heat sources such as radiations, heat registers, stoves, or other Television (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the Television.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Unplug this Television during lighting storms or when unused for long periods of time.
  13. Refer all servicing to qualified service personnel. Servicing is required when the Television has been damaged in any way, such as; power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Television, the Television has been exposed to rain or moisture, does not operate normally, or has been dropped.
  14. Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
  15. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
  16. No naked flame sources, such as lighted candles, should be placed on the Television.
  17. Attention should be drawn to the environmental aspects of battery disposal.
  18. The use of Television in moderate climate.
  19. The Television shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the Television.
  20. To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal.

| CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN!|
---|---|---
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
The symbol indicates that there are important operating and maintenance instructions in the literatur accompanying this unit.

WARNING

To reduce the risk of fire or electric shock, do not expose this Television to rain or moisture.

WARNING

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING

The excessive sound pressure from earphones and headphones can cause hearing loss.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement part

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Haier is committed to safely recycling electronic products and product materials. Please check for a local recycling location in the United States at: 1800RECYCLING.COM or call 1.800.RECYCLING.

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environmental through energy efficient practices.
This product qualifies for ENERGY STAR in the “factory default” (Energy Saving mode) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating.

SAFETY AND WARNING

  • High voltages are used in the operation of this television receiver. Do not the cabinet.
    Refer servicing to qualified service personnel.

  • To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

  • Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

  • Do not block the ventilation holes on the back cover . Adequate ventilation is essential to prevent failure of electrical components.

  • Do not trap the power supply cord under the television receivers .

  • Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

  • Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual and damage to the television may result if it falls.

  • When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

  • Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on or near the television.

  • If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the life of your television, and can also be dangerous.

INTRODUCTION

Main features

  • Integrated ATSC TV tuner for HDTV broadcast reception Power
  • High brightness provides a vivid and brilliant picture
  • Deeper blacks and brighter whites with high contrast
  • Wide Screen aspect ratio (16:9) for a complete home theater experience
  • HDMI input for true digital connection
  • VGA port for connection to PC
  • Built-in stereo speaker system
  • Full-function Remote Control

Accessories

Power cable…………………………….. 1
frared Remote Control……………….. 1
User’s Manual …………………………… 1
Battery(AAA)…………………………….. 2

Main Specifications

Viewing Picture Size (diagonal) 39.5 inches
Resolution: 1920 x 1080
Power supply AC 100-240V 50/60Hz
Power consumption 70W
Audio Output Power (THD  7%): 2x8W
Aspect Ratio: 16:9
TV System: ATSC Digital system and NTSC Analog system
Video Signal System: NTSC
Receiving Channel: Cable :1-135/ Air: 2-69 (ATV&DTV)
High-Definition Multimedia Interface (HDMI) Input x 3 (1 HDMI input is MHL

enabled)
Component (YPbPr) Input| x 1
Composite Video Input| x 1
Analog RGB (VGA) Input| x 1
Audio Input| x 2
Headphone Output| x 1
Coaxial Output| x 1
USB Input| x 1
Horizontal definition (TV line)| Composite Video Input >=350
Video Input>=400
Component (YPbPr)>=400

Base Stand Assembly Instruction

  1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Insert the TV stand leg into the bottom of the TV cabinet– please ensure that the legs of the TV stand are pointed outward with and with the longer leg pointed toward the front of the TV. Please refer to the attached picture.

  2. Attach the TV stand legs with the included M4 screws(4 pcs).

    Note: This stand does not swivel. Do not attempt to rotate the TV.

WALL MOUNT INSTALLATION INSTRUCTIONS

When attaching the wall mount screws into the back of the TV, use the maximum torque of 8
kilogram force centimeter. The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. The recommended wall mount screw is M6 with an approximate length of 8mm. Please see the instructions that came with the wall-mount bracket for screw lengths.
Please follow the instructions of the user manual that came with the wall mount bracket to install and please do not use excessive torque when attaching the wall mount screw to the TV

Warning: the angle between the TV and wall must not be greater than 3 degrees.

Note: wall mount bracket and screws are not included.

INSTALLATION

Front panel

  1. Remote control sensor.
  2. Indicator LED: RED STANDBY.
  3. Panel keys

Panel keys

  1. SOURCE:
    Display the input source menu.

  2. MENU:
    Display main MENU.

  3. V-/V+
    Adjust sound level.
    In MENU mode, press“V+ ”or“V-” to adjust the item that you selected.

  4. CH-/CH+
    In TV mode, press “CH+ ”or“ CH-”to change the channel up and down.
    In MENU mode, press “CH+ ”or“ CH-”to select items.

  5. STANDBY
    Press this button to turn the unit ON from STANDBY mode.
    Press it again to turn the set back to STANDBY.

REAR Connections

All the terminals are (from left to right):
POWER SOCKET, RF, COAXIAL (audio output), AUDIO INPUT, HDMI1

SIDE Connections

All the terminals are (from left to right): MHL/HDMI2, VGA, PC AUDIO, HDMI3, HEADPHONE, AV/YPbPr(COMPONENT)INPUT, USB.
Note: When HDMI has an input signal coming from a DVI source then the audio input signal must be connected to the PC audio input.
AV and component (YPbPr) share the R and L audio inputs.

ANTENNA

PC

STEPS:
Be sure both the TV and computer are powered off.

  1. Connect a VGA and audio cable.
  2. Connect the power cord.
  3. Turn on the TV, switch to PC mode.
  4. Turn on the PC.

PRESET MODE

| RESOLUTION| V.Freq.(Hz)| H.Freq.(KHz)
---|---|---|---
1| 640480| 60| 31.47
2| 800
600| 60| 37.88
3| 1024768| 60| 48.36
4| 1280
1024| 60| 63.98
5| 1366768| 60| 47.71
6| 1920
1080| 60| 67.50

AV EQUIPMENT

There are three HDMI ports located on the back of your TV. You can connect a Blu-ray player, DVD player, or other video equipment through these ports.

The HDMI2 port is MHL enabled. You can connect MHL devices, such as the compatible mobile phones and tablets.
NOTE: a USB to HDMI cable is required to connect a mobile phone or tablet to the TV. Please check the documentation of your device.

There is one component (Y, Pb, Pr) and one composite (AV) video input located on the back of your TV. You can connect a VCR, cable box, or other video equipment to these jacks.
Please see the diagram below. You may also need to refer to the owner’s manual of the device that you are trying to connect.

The television’s inputs can be connected to the following types of equipment: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc….. YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i, 1080p

REMOTE CONTROL

  1. Press to turn on and off the TV.
  2. USB: Press to launch the USB multimedia mode.
  3. Select a closed caption option.
  4. Press to input a channel.
  5. Press to select the digital sub-channels. For example, to enter “54-3”, press“54”,“●”, and then “3”.
  6. Press CH or CH to go to the next or previous channel in the channel list. Press VOL+ or VOL- to increase or decrease the volume.
  7. Return to the previous menu.
  8. Press to display the TV status information.
  9. Select MONO, STEREO, SAP in NTSC (analog TV) system.
  10. Press to cycle through the sleep timer options.
  11. Press to cycle through the different sound settings.
  12. Open the channel list in TV mode.
  13. Show the input source menu.
  14. Switch to the HDMI2/MHL input.
  15. Press to go to the last viewed channel.
  16. Switches the TV sound on or off.
  17. Press to open the on-screen display (OSD) menu.Exit the on-screen display.
  18. Press to change the aspect ratio.
  19. Press to cycle through the available picture modes.
  20. Press to confirm selections in an on-screen menu or to open a submenu.
  21. Open the favorite channel list in TV mode.
  22. Reserved.
  23. Reverse/Fast forward: Use these buttons to control music/photo playback.
  24. PLAY/PAUSE: Press to play/pause music or photo slideshow in USB mode.
  25. Reserved.

OPERATION

  1. PICTURE MENU
    In this menu, you can adjust the picture options, such as contrast, brightness, etc. Press to select, press OK to adjust.

    Note:
    1) If you want to adjust contrast, brightness, color, and sharpness, the picture mode be set to . will user
    2) Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint.
    picture
    Adjust the color tempertaure to Energy Saving mode is the default setting, if you select some other options, the power consumption may change.
    VGA Setting
    When a PC is connected, you can adjust the VGA settings.
    1) H-Pos: Adjust the horizontal position of the screen.
    2) V-Pos: Adjust the vertical position of the screen.
    3) Clock: Fine tune the screen width.
    4) Phase: Fine tune the phase of the screen. Usually you don’t adjust this item.
    5) Auto: Auto adjust to fit the screen.

  2. AUDIO menu
    In this menu, you can adjust the sound options. Press to select, press  to adjust

    Note:

  1. Audio language is available in ATSC/TVmode only.
  2. Auto volume is available only when the input signal volume is too large or there is distortion.
  1. SETUP menu
    In this menu, you can adjust the Menu language, Closed Caption, adjust the sleep timer, time zone, Restore Default, etc.
    Press to select, press to adjust.

Closed Caption

1) CC Mode: Switch the closed caption mode.
2) Advanced selection: only available in ATSC.
3) Option: Used to edit the CC font.

Note:

  1. Restore Default: Restore Default will clear all the saved channels and reset all the settings to of the factory default values.

LOCK MENU

the vchip settings. Enter the password, to enter the lock menu. The factory default password is 0000.

Change Password

  1. old password: Input the old password.
  2. new password: Input the new password.
  3. Confirm password: Input the new password again.

System Lock

When the System Lock switch is ON, the options listed below can be adjusted.

US

Press to display the following screen. OK

Lock Menu

  1. TV: Press display the following screen.
    Lock Menu
    And use the key to lock/unlock OK Parental Controls

  2. MPAA: Switching the movie-rating control level; N/A, G, PG, PG-13, R, NC-17, X

Rating

|

Description

---|---

Age

| G| General audiences, All Ages admitted
PG| Parental Guidance suggested. Some material may not be Suitable for children.

PG-13

| Parents strongly cautioned. Some material .may be Inappropriate for children under 13.
R| Restrict. Under 17 requires accompanying parent or adult guardian(age varies in some jurisdictions)
NC-17| No one 17 and under admitted.
X| X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.

Canada

  1. Press , to display the following screen. OK
    Rating| Description
    ---|---

Age

| E| Exempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming.
C| Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that could threaten their sense of securityand well-being.
C8+| Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen .
G| General: Considered acceptable for all age groups, Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.
PG| Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.
14+| Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline But it must be integral to the development of plot or character. Language usage could be profane and nudity , present within the context of theme.
18+| Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of secretary and nudity.
2. Canada French: Switching the French-rating control level: E, G, 8ANS+, 13 ANS+, 16ANS+, 18ANS+.
Rating| Description
---|---

Age

| E| Exempt programming
G| General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner.
8ans+| General but inadvisable for young children :May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with paren.
13ans+| Over 13 years: Could contain scenes of frequent violent scenes and in tense violence.
16ans+| Over 16 years: Could contain frequent violent scenes and violence.
18ans+| Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.

RRT setting

In ATSC digital TV mode, it can be adjusted

Reset RRT:

Press OK In to reset the RRT settings to the factory

TV MENU

In this menu, you can adjust digital and analog TV Channels.
Press to select, press to adjust.

Tv Menu

Air/Cable:

Select Air TV signal cable TV signal.

Channel Scan:

If it’s the first time you use the TV, you should scan all the TV channels first.
Press to confirm to display the following screen.

Tv Menu

Favorite:

Press to choose/delete favorite channels.

Show/Hide

Press to display/ hide the current channel.

DTV signal

Display DTV signal . It can’t be selected or adjusted.

e-Manual

Display the user guide.

Multimedia

You can display the Music and Photo fil s by using the USB port that is located on the rear panel:

Multimedia

Trouble phenomenon Symptom Inspection/ Check

Picture Audio

Snow| Symbol| antenna position, direction or connection
  Ghost| Symbol| antenna position, direction or connection

Interference| Symbol| microwave, electronic equipment, car/motorcycle, fluorescent light

Normal Picture
| Symbol| Volume (check if mute is actives Qi if the ad system antic~\ed Qi if the avid system

No picture| Symbol| Power cord is not inserted Contrast and brightness/volume setup Press standby key on the remote control
No color| Symbol| Component (Y Pb Pr) connections

Picture breaking up| Symbol| Retune channel

No color| Symbol| TV system

The LCD TV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product.

Warranty

This Haier brand product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a new or re-manufactured equivalent, for parts or labor for the periods set forth below:

This warranty does not apply to the appearance of the product or the exterior of the product, which has been damaged or defaced, altered or modified in design or construction. It does not apply to the additional excluded items set forth below:

The warranty commences on the date the item was purchased and the original purchase receipt must be presented to the authorized service center before warranty repairs are rendered.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(s) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Haier.

The warranties described herein shall be the sole and exclusive warranties granted by Haier and shall be the sole and exclusive remedy available to the purchaser. Correction of defects in the manner and for the period of time described herein, shall constitute complete fulfillment of all abilities and Responsibility of Haier to the purchaser with respect to the product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict duality or otherwise. In no event shall Haier be liable, or in any way responsible for any damages or defects in the product which were caused by repairs or attempted repairs performed by anyone other than an authorized service center or dealer; nor shall Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Warranty period for this product is one year parts and labor. Additional items excluded from warranty coverage :none chargeable batteries. What to do to obtain service or to obtain product literature accessories, supplies or customer ssistance: Simply call 1-877-337-3639. Be sure to have proof of purchase.

Customer Support

www.haier.com

Models:
40E3500
Issued: 2014.10
Made in China
Fabrique en Chine
Hecho en China
Printed in China
La Chine imprimee
Clhina impresa
Haier America
Wayne, NJ 07 4 70
©2015 Haier America Trading, LLC.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Haier User Manuals

Related Manuals