JETE TWS T12 Doran Gadget User Manual

: September 14, 2024
: JETE

Table of Contents

JETE TWS T12 Doran Gadget
Package Content
Description Structure Product
How to Charge
Spesification of TWS
Maintenance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

JETE TWS T12 Doran Gadget

e-User manual
IMPORTIR

PT. DORAN SUKSES INDONESIA
Jl. Lebak Jaya 2 Tengah No. 2, Surabaya

CUSTOMER SERVICE

Tel: 081217393609
J·ete.id
Jeteindonesia
facebook jeteindonesia
Twitter jeteindonesia

Please read the process carefully before using the product

Product Introduction:
Thank you for purchasing JETE products. For optimal and safe performance, please read the instructions carefully before using this product.

Package Content

$JETE-TWS-T12-Doran-Gadget-$2$$

Description Structure Product

LED Indicator Charging Port
MFB (Multifunction Button)
LED Indicator Earbud
Port Charging

Tips : Gently insert the earbuds into your ears and adjust the position to fit your ears.

Attention : Please open the plastic seals on both ends of the earbuds and do not forget the earbuds in the charger into the charging case fo r approximately10 minutes for optimal use

How to Turn On the Earbud :
Take the earbuds out of the charging box to switch on.

How to Turn Off the Earbud :
Put the earbuds into the charging box and close the charging box then the earbuds will turn off.

How to Connect the Device with Earbud :

Take theearbuds outofthe charging box
The indicator will flash red and blue on one of the earbuds
Switch on bluetooth on the device
Then switch on search and select “JETE-T12”
The earbuds are ready for use
If within 180 seconds of the earbuds activating you do not pair with bluetooth on your device. the earbuds should be restarted.

Notes:

The earbuds store previously connected devices. when switched on again the earbuds will try to repeat the connection to the previous device.
The earbuds will lose connection if the bluetooth distance exceeds the range limit. the earbuds will automatically reconnect when you come back into bluetooth range after 3 minutes.

How to Answer Incoming Call:
Press 1 times at the MFB earbud on the right/left to answer the call

How to End a Call :
Press 1 times at the MFB earbud on the right/left to end the call

How to Reject a Call :
Press the 2 seconds at the MFB earbud on the right/left to reject the call

How to Active Feature Voice Assistant :
Press 2 times at the earbud on the right/left for active voice assistance

How to Play / Pause :
Press 1 times at the earbud on the right/left to Play/pause music.

How to Play Music :

Next song : Press 3 times at the earbud on the right for play music next
Previous song: Press 3 times at the earbud on the left for play music previous

How to Increase & Decrease Volume :

Press 2 seconds at the earbud on the left for increase volume
Press 2 seconds at the earbud on the right for decrease volume

How to Use Mono Mode :

Take out one of the earbuds from the charging box and it will be connected to the previous device.
Then play back and forth this mode can also be used to make phone calls.
It is recommended that the earbuds work normally use them according to the TWS function

How to Charge

Charging Case

Charge the box, the indicator will flash red while charging then the indicator will flash after charging

Earbud

Put the earbuds into the charging box to charge, the earbuds indicator will be red and the indicator will turn off when the earbuds battery is fully charged.

How to Factory Reset :

Press 6 times at the earbud on the left/right for reset earbud.

Spesification of TWS

Bluetooth : V5.3
Wireless Range : 10m
Support Protocol : HFP V1;HSP V1.2;A2DP V1.3;AVRCP V1.6
Transmissin Frequency : 20 Hz ~ 20 Khz
Playtime : 4 Hour
Talk Time : 3.5 Hour
Standby Time : 180 Hour
Charging Time : 1.5 Hour (Charging Case)
Earbuds Battery Capacity : 3.7V /30mAh
Charging Case Battery : 3.7V/250mAh

Capacity

Earbud Weight : 3.2 X 2 g
Charging Case Weight : 38.2 g

Maintenance

Please read the following recommendations before using JETE

Avoid exposing the device to water vapor or humid places. This can affect the internal circuit.
Do not use cleaning solutions to clean the device.
Do not expose the device to extreme heat or cold, as this can damage the device or change certain plastic parts.
Avoid exposing the device to sharp objects, as this can cause scratches and damage.
Do not disassemble or modify the device.
Do not drop the device, as this can damage the circuitry.
Always store the device at room temperature.

How to Warranty Claim JETE Product:

All warranty claims can be made at the list of Authorized Outlets listed on the warranty card.
Buyers can come to an authorized Outlet or contact Customer Service +62812-1739-3609 if they want to exchange the product online.
All expedition shipping costs/ product postage are borne by the buyer.
When claiming the warranty, the buyer is MANDATORY to show the completeness of the warranty:
- A purchase receipt that clearly states the name of the outlet and the date of the transaction.
- The product must still be within the specified warranty period.
- Warranty card that has been filled out.
- Box/ Packing Product.
Please inform the constraints/ product damage that occurs to our staff.
WARRANTY DOES NOT APPLY if USER DAMAGE is found, namely:
BROKEN, CRACKED, BURNED, DROPPED, MODIFIED BY YOURSEL F, SUBMERGED IN WATER.
If there are problems during warranty claims or other questions, please contact Customer Service+62812-1739-3609

Terms and Conditions of Warranty:

This warranty is valid for 2 years for original JETE products.
This warranty is valid for the warranty period stated on the product packaging since the date of sale.
During the warranty period, the user is exempt from any replacement costs that may occur.
The user must show the warranty card and purchase receipt when applying for a warranty.
The warranty applies to functional damage:
- Disfunction.
- Audio not detected.
- Indicator off.
- Battery damage.
This warranty DOES NOT APPLY if:
- PRODUCT IS BROKEN, CRACKED, BURNED, FALLEN,
- MODIFIED YOURSELF, SOAKED IN WATER.
- Supporting accessories such as: cables, adapters, etc.
- Abnormal use, not stored properly, natural disasters, modified, or anything intentionally.
- The product has been repaired by a third party.
- The data is not filled in completely by the seller and buyer.
- Damage caused by user error.
- The product warranty period has expired.