JETE SK1 Wireless Keyboard User Manual
- September 18, 2024
- JETE
Table of Contents
JETE SK1 Wireless Keyboard
Please read the instructions carefully
before using the product.
Product Introduction
Thank you for purchasing JETE products. For
optimal and safe performance, it is expected to read
the instructions carefully before using this product.
Content Package
Description Structure Product
When the keyboard battery is low, the keyboard will
delay or slow down typing, and the used channel
indicator will light white until the keyboard power
automatically turns off. Please replace the battery
with a new one so that the board can work optimally.
Koneksi Bluetooth :
-
Install 2* AAA batteries, behind the keyboard slot
-
Slide the Power switch to the “ON” side to turn on the keyboard
-
Bluetooth 1: Press the ” & 1″ button once the indicator will flash
white intermittently, then press for 3 seconds the “&1” button
the indicator will flash white rapidly signaling the keyboard
enters Pairing mode. -
Turn on the bluetooth function on the device, then activate the
search and select “JETE-SK1”, wait until the keyboard and the
device are successfully connected. after successful pairing
the indicator on the “B1/B2” button will turn off.
Notes:
1. After connecting with the first device, and if you want to pair
with the second device, please repeat steps number 3 & 4 to
pair with the second device.
2. If the keyboard is in pairing mode, but not paired until 3
minutes, the keyboard will stop from pairing mode, please
repeat steps 3 & 4 to pair again.
3. If pairing fails, please delete the pairing on the other device,
and repeat the pairing procedure again.
Receiver 2.4G Connection
- Install 2* AAA batteries, behind the keyboard slot OFF → CID ON
- Slide the power button to the “ON” side to turn the keyboard on 3
take out the 2.4G dongle from behind the bottom slot of the
keyboard, and insert it into the USB port on the device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>