tp-link TL-SG105S Gigabit Desktop Switch Installation Guide
- September 13, 2024
- tp-link
Table of Contents
tp-link TL-SG105S Gigabit Desktop Switch
Panel Explanation
Power LED
- On: Power on
- Off: Power off
- Flashing: Loop occurs in the network topology
Link/Act LED
- For TL-SG116:
- For other models:
Switch
- On: The switch will monitor and address loop-related issues within the network structure to prevent disruptions caused by redundant pathing
- Off: (default) The switch will not try to monitor or address loop-related issues
Note : For simplicity, we will take TL-SG108 for example throughout this Guide.
Installation
Desktop:
Attach the supplied feet to the bottom of the switch to prevent it from slipping when placed on a desktop
Wall-mounting:
Drill two holes on the wall according to the mounting holes on the bottom of the switch, then secure the switch to the wall with two suitable screws (not provided).
Note : For detailed information, please refer to the Wall Mounting Guide on the device’s support page.
Connection
Specifications
FAQs
Q1. The Power LED is not lit.
The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows:
- A1 : Make sure the power adapter is connected to the switch with the power source properly.
- A2 : Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
- A3 : Make sure the power source is ON.
Q2. The Link/Act LED is not lit when a device is connected to the corresponding port.
It is recommended that you check the following items:
- A1 : Make sure that the cable connectors are firmly plugged into the switch and the device.
- A2 : Make sure the connected device is turned on and works normally.
- A3 : The cable must be less than 100 meters long (328 feet).
Q3. Why does the switch fail to detect and block a loop from occurring in the network topology when Loop Prevention is enabled?
A : When this switch is connected to other non-terminal devices, such as switches of other brands, and the device is incapable of correctly processing or forwarding loop detection packets, the Loop Prevention function will be limited. It is recommended to connect the terminal devices directly to this switch or connect non-terminal devices with complete forwarding capability to this switch.
Safety Information
- Keep the device away from water, fire, humidity, or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Use only power supplies that are provided by the manufacturer and in the origin packing of this product. If you have any questions, please don’t hesitate to contact us.
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com/business to join TP- Link Community.
For technical support and other information, please visit https://www.tp- link.com/support/?type=smb, or simply scan the QR code.
EU declaration of conformity
For TL-SG116:
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
For other models:
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
UK declaration of conformity
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
- The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>