tp-link MC220L,MC420L SFP Plus Media Converter Instruction Manual

tp-link MC220L,MC420L SFP Plus Media Converter

CONNECTION

Note : MC420L is used as an example throughout this guide. Other models may differ in appearance.

Scenario 1: Connect Devices with and without Optical Interfaces

Note : It is recommended to use a TP-Link SFP/SFP+ module on MC220L/MC420L respectively, because other vendors’ modules may be incompatible.

Scenario 2: Connect Devices without Optical Interfaces

Note:

1. Two converters with a pair of SFP/SFP+ modules can work cooperatively.

LED Explanation

PWR

• On: Power on.
• Off: Power off.

Link/Act (for MC220L)

• FX
  • On: There is a valid link for FX Port.
  • Flashing: FX Port is transmitting or receiving data.
  • Off: There is no valid link for FX Port.
• TP
  • On: There is a valid link for TP Port.
  • Flashing: The TP Port is transmitting or receiving data.
  • Off: There is no valid link for TP Port.

Link/Act (for MC420L)

• FX
  • Green On: FX Port is linked at 10Gbps, but there is no activity.
  • Green Flashing: The FX Port is working at 10Gbps.
  • Yellow On: FX Port is linked at 1Gbps, but there is no activity.
  • Yellow Flashing: The FX Port is working at 1Gbps.
  • Off: There is no valid link for FX Port.
• TP
  • Green On: TP Port is linked at 10Gbps, but there is no activity.
  • Green Flashing: TP Port is working at 10Gbps.
  • Yellow On: TP Port is linked at 5Gbps/2.5Gbps/1Gbps, but there is no activity.
  • Yellow Flashing: TP Port is working at 5Gbps/2.5Gbps/1Gbps.
  • Off: There is no valid link for TP Port.

Specifications

Environmental and Physical Specifications

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
• Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.
• Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.

FCC STATEMENT

• Product Name: Omada Gigabit Ethernet Media Converter
• Model Number: MC220L/MC420L

Responsible party:

TP-Link USA Corporation

• Address: 10 Mauchly, Irvine, CA 92618

• Website: https://www.tp-link.com/us/

• Tel: +1 626 333 0234

• Fax: +1 909 527 6804

• E-mail: sales.usa@tp-link.com

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.
  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Industry Canada Statement

• CAN ICES-3 (A)/NMB-3(A)

CE Mark Warning

• This is a class-A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863. The original EU Declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UK declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca/

Explanation of the symbols on the product label

Symbols may vary from product. The label is at the bottom of the product.

• For technical support and other information, please visit
• https://www.tp-link.com/support/?type=smb, or simply scan the QR code.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>