Firefly Bond Bridge Expands Installation Guide
- September 13, 2024
- bond
Table of Contents
Firefly Bond Bridge Expands
Firefly One is a 12VDC in-line Wi-Fi smart controller that can drive up to 60 Watt of LED lights. With Firefly One you will be able to:
- Connect Firefly One between your lights and the 12VDC power supply. Note: If you see the “FAULT” LED gets RED, your system has reversed polarity. Check the polarity key on your input cable and correct any problems before proceeding.
- Plug the power supply into a GFCI-protected outlet.
- Mount with the included adhesive strips and/or by replacing the black screws with the included 1.5″ wood screws.
When connecting a Plug-N-Play connector or splitter:
- Ensure the flat sides of male and female connectors match for a correct connection.
- Avoid forcing them together. For waterproof connections, especially with constant water exposure, applying dielectric grease before connecting is mandatory.
Setting up in the Bond Home App
- Scan to download Bond Home app
- Sign in or create an account
- Press “+” and add a “Light” device
- Tap on “Yes, my device is Smart by Bond” and follow in-app instructions
Can’t connect to your Firefly One?
- You may need to reset its Wi-Fi settings. Hold the Gear Button for 5 seconds until Wi-Fi Status goes Solid Green.
Specifications
Feature | Description |
---|---|
Power Supply | 12VDC |
Max LED Wattage | 60 Watt |
Control | Wi-Fi |
Mounting Options | Adhesive strips, 1.5″ wood screws |
FAQ
This indicates that your system has reversed polarity Check the polarity key on your input cable and correct any problems before proceeding.
How do I connect the Plug N Play connector or splitter?
Ensure the flat sides of male and female connectors match for a correct connection Avoid forcing them together For waterproof connections especially with constant water exposure applying dielectric grease before connecting is mandatory.
How do I add a Light device in the Bond Home app?
Press + and add a Light device then tap on Yes my device is Smart by Bond and follow the inapp instructions.
Firefly One setup & installation guide
Firefly One is a 12VDC in-line Wi-Fi smart controller that can drive up to 60
Watt of LED lights. With Firefly One you will be able to:
- Fine-tune brightness
- Set schedules
- Create groups
- App control
- Voice control
Hardware Setup
- Connect Firefly One between your lights and the 12VDC power supply
- Plug the power supply into a GFCI-protected outlet*
- Mount with the included adhesive strips and/or by replacing the black screws with the included 1.5″ wood screws
If you see the “FAULT” LED gets RED, your system has reversed polarity. Check the polarity key on your input cable and correct any problems before proceeding.
Setting up in the Bond Home app
- Scan to download Bond Home app
- Sign in or create an account
- Press and add a “Light” device
Is your device smart?
- Tap on “Yes, my device is Smart by Bond” and follow in-app instructions
Can’t connect to your Firefly One?
- You may need to reset its Wi-Fi settings.
- Hold the Gear Button for 5 seconds
- Wi-Fi Status Until Wi-Fi Status goes Solid Green
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>