bond6 RGB Link Network Bonding Router User Manual
- June 4, 2024
- bond
Table of Contents
bond6 RGB Link Network Bonding Router
Key Features
- Bonding Network Router
- 5*USB port for TD-LTE standard Dongle
- Bonding up to 5 Dongle and 1 LAN together
- WAN external broadband bonding
- 2.4GHz+5.8GHz dual-band wifi
- wifi hotspot sharing
- Real-time status on LCD screen
- Optional built-in lithium battery with higher capacity
- 1/4 screw hole for rack mounting
Specification
Connectors| USB 2.0
LAN
| 5×USB-A
1×RJ45
---|---|---
Power| 1×DC jack
Performance| CPU RAM EMMC WIFI
Bandwidth
| Quad-core Cortex-A7 CPU 512MB
8GB
2.4G +5.8G
60Mbps
Power| Input Voltage| DC 12V/2A
Maximum Battery Capacity| 15000mAh
Supported Battery| SN F550/750/960 | FM50/70/90 | QM91D; PAN VBD1/VBD2; JVC
V607U/V617U
Environment| Temperature| -20 ~ 60℃
Humidity| 0 ~ 65%
Physical| Dimension| 135mm×91mm×32mm
Interface
Screen logo Instruction
How to Config
Step 1: Directly connect a laptop to the bond router via LAN cable. The bond router has a DHCP server and will provide an IP address to a connected laptop that is set for default (DHCP) network configuration.
Step 2: Check network settings in the laptop to confirm IP address is in
the same subnet as the bond router -192.168.100.xxx.
Step 3: Open a browser window and enter 192.168.100.1 in the address bar.
This IP address is default, preset IP address of the bond router.
To login use the unique login details provided to you (User name and
Password).
Step 4: Plug Dongles with SIM card inside to USB port and then directly
connect TAO 1pro to the bond router via LAN cable as shown below.
Step 5 : Press the power switch .
Step 6 : Check network settings in the LCD screen shown as below to
confirm the IP address of cloud server.
Step 7: Click【Status】to check the bonding status.
WIFI Connection
Plug the Dongle to the bond router or connect the bond router to a ethernet
router, and connect the wifi in your computer of
phone.(name:RGBlink,password:provided to you)
After wifi connection,check the IP address of your laptop/phone and enter it
in a browser window,and then settings can be done to the router.(the operation
steps as the same with
How to Change Password 
Step 1: Navigate to the【Network】–【Wireless】–【Edit】 
Step 2: Navigate to the【Interface Configuration】–【Wireless Security】, revise the key and then click【Save】.
Step 3 : Click【Save&Apply】,power off the bond 6 and restart again,the settings will make effect.
How to Apply
The bond router can work with TAO 1pro.
Connect TAO 1pro to the router via LAN port to stream to network platforms,
such as YouTube, Twitter and so on. The wiring diagram as shown below:
Step 1: Plug a Dongle with SIM card inside to USB port.
Step 2: Directly connect TAO 1pro to the bond router via LAN cable.
Step 3 : Press the power switch.
Step 4: Check network settings in the LCD screen to confirm IP address is
in the same subnet as the bond router -192.168.100.xxx.
Support
