COMMSCOPE MCG22RHDX-13M12120 Monopole Sector Frame Owner’s Manual
- September 13, 2024
- CommScope
Table of Contents
COMMSCOPE MCG22RHDX-13M12120 Monopole Sector Frame
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
- FITS MONOPOLES 28″ TO 50″ OD. MONOPOLE DIAMETER MUST BE GREATER THAN OR EQUAL TO 28″ TO MEET ANTENNA TO ANTENNA CORNER SPACING OF >24″.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
ALLOWABLE TIEBACK ANGLE
- +- 15 DEGREES VERTICAL
- +- 25 DEGREES HORIZONTAL
COMMSCOPE, INC. OF NORTH CAROLINA
PG,MP,SF,13’FP,(12)120″AP
Scale : 1:20
SOME ITEMS OMITTED FOR CLARITY
COMMSCOPE, INC. OF NORTH CAROLINA
PG,MP,SF,13’FP,(12)120″AP
Scale : 1:24
ANTENNA SPACING
SOME ITEMS OMITTED FOR CLARITY.
COMMSCOPE, INC. OF NORTH CAROLINA
PG,MP,SF,13’FP,(12)120″AP
Scale : 1:8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>