nVent 3 HE-6 HE EuropacPRO Rugged Subrack Kit for Backplane User Manual
- October 30, 2023
- nVent
Table of Contents
nVent 3 HE-6 HE EuropacPRO Rugged Subrack Kit for Backplane
Product Information europacPRO rugged Kit 3 U / 6 U
The europacPRO rugged Kit is a heavy-duty enclosure designed for rugged
environments. The kit is available in two sizes: 3U and 6U.
The kit includes all necessary components for assembly, including a textile
gasket joint CEM textile.
- Available Sizes: 3U and 6U
- Components included: Textile gasket joint CEM textile, M4 screws (14 Torx 20, 10 Torx 20, 18 Torx 20, 7 Torx 20, and 8 Torx 20), M2.5 screws (12.3), M5 screws (12 Torx T20), and M2.5 screws (6 Torx T8)
Product Usage Instructions:
Follow the below instructions to assemble the europacPRO rugged Kit:
- Identify all components listed in the user manual.
- Install the textile gasket joint CEM textile (component #1) onto the base (component #2).
- Attach the front panel (component #7) to the base using four M4 screws (component #13).
- Attach the rear panel (component #3) and two side panels (components #4 and #5) to the base using M4 screws (components #14, #15, #16, and #17).
- Attach the top panel (component #8) to the enclosure using M4 screws (components #18 and #19).
- Attach the front handles (component #9) and rear handles (component #10) to the enclosure using M4 screws (component #20).
- Attach the front and rear covers (components #11 and #12) to the enclosure using M4 screws (components #21 and #22).
- Attach the feet (component #25) to the enclosure using M2.5 screws (component #23).
- Ensure that the gasket is properly sealed to the enclosure to prevent water or dust ingress.
Uusreorp MaacnPuRaOl rugged Kit 3 U / 6 U
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>