GYSPACK 600 Autonomous Starter 230V Instruction Manual
- September 12, 2024
- GYS
Table of Contents
GYSPACK 600 Autonomous Starter 230V
Product Information
Specifications
- Product : GYSPACK 400 / 600
- Battery : 6FM – 18 / 6FM – 22
- Battery Type : Lead-acid
- Voltage : 12V / 18V / 22V
- Dimensions : 33cm x 14cm x 43cm / 33cm x 20cm x 43cm
Product Usage Instructions
Safety Instructions
- This device is suitable for indoor use only. Do not expose it to rain or excessive moisture.
- Children aged 8 and above and individuals with reduced capabilities can use the device under supervision or after being instructed on safe usage.
- Do not use the device as a toy for children.
- Only use the charger provided with the device for battery recharging.
- Do not operate the device with a damaged power supply cord or mains plug.
- Avoid charging frozen or damaged batteries.
General Description
The GYSPACK is an autonomous starter designed for vehicles with a 12V
battery. It operates using a high-performance internal battery. To ensure
proper use and prolong the battery’s lifespan, connect the GYSPACK to the
power source after each use until the next one.
Battery Replacement
To replace the battery:
- Locate the battery terminals (-1 and +2) on the GYSPACK.
- Remove the screw connecting the battery to the device’s circuitry to detach it.
FAQ
Q: Can I use a different charger to recharge the batteries?
A: No, only use the charger provided with the GYSPACK for battery recharging
to avoid any risks.
Q: What should I do if the charging cable appears damaged?
A: Do not operate the device if the charging cable is damaged or incorrectly
assembled to prevent short-circuiting the battery. Contact customer support
for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>