BlissLights ‎900-00032 USB Laser Star Projector User Manual

BlissLights ‎900-00032 USB Laser Star Projector

NOTICE
CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser product is certified as a CLASS 3R laser product, and adheres to the requirements of the US Federal Laser Product Performance Standard (FLPPS) contained in the regulations in 21 CFR Subchapter J.
Avoid direct eye contact of CLASS 3R laser energy as it can be hazardous. For reference, the FLPPS requirements for demonstration laser products, like laser pointers, are limited to CLASS 3R levels of laser energy. This product uses diffractive optics to scatter the beam energy. This scattering effect causes the energy concentration to drop below the exposure limits for momentary or accidental viewing at a relatively short distance from the laser aperture. As with all bright light-sources, when you operate this device in unsupervised general public areas, it is recommended that up-close access to the light be restricted or prevented.
This laser display device incorporates a CLASS 3R laser system which, by itself, may be hazardous. However, this laser display device incorporates a protective housing and diffractive holographic optics in the machine design so that there is no exposure or human access to laser radiation during operation or maintenance above the CLASS 3R limits. Each individual laser beamlet’s power is under 1 mW, which is less than a standard laser pointer. UNDER NO CIRCUMSTANCES shall attempts be made to open the protective housing or operate the device if the aperture window is damaged.
All service to this laser display device requiring the protective housing to be opened and/ or removed shall be performed by service personnel or their authorized agents. Opening the protective housing voids the warranty.

NO LASERS SHOULD BE POINTED INTO THE SKY WITHIN 10 NAUTICAL MILES (18.5 km) OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER, WE RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO STRAY BEAMS ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL AIRPORT OR PROVINCIAL GUIDELINES FOR FURTHER INFORMATION.

INTRODUCTION

Thank you for purchasing the BlissLights StarPortTM Laser USB. This product is a unique indoor light fixture that uses patented laser and holographic technology to project thousands of pinpoints of light from a compact USB- powered housing. Sleep under the stars, create a romantic starlit dinner, or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience. Each unit provides up to 30 x 30 ft of coverage. It has maximum electrical usage of less than 10 Watts and operates in temperatures between 32°F to 104°F (0°C to 40°C).

BEFORE YOU BEGIN

Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain the packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. If the fixture must be returned, the fixture must be returned to the original factory box. Please see the parts list below for box contents.

PARTS LIST

1. StarPort™ Laser USB
2. Male to Female USB Extender

SETTING UP THE LASER PROJECTOR

Before operating your laser projector, please read the “Before you Begin” section and “Notice” section of this user’s guide.

1. Connect the StarPort™ to a flexible extender if desired.
2. Insert the StarPort™ into a powered USB port, outlet, or battery pack.

INSTALLATION TIPS

The darker the display area, the brighter your projection will appear. Try to avoid display areas with strong ambient light sources, such as bright fluorescent lights.

PRODUCT SPECIFICATIONS

Lighting Facts Per Unit

• Brightness: < 5mW
• Estimated Yearly Energy Cost 50¢ 4hrs/day, 10c/kWh Cost depends on rates and use
• Life: Up to 8,000 hrs
• Light Appearance
  • Green 507nm
  • Blue 445nm
  • Red 638nm
• Energy Used: Less than 2W

Features

1. Portable Design
   The projector’s compact size and lightweight structure make it easy to carry and reposition. Whether you’re using it at home, for a party, or on a trip, the BlissLights Star Projector can be conveniently moved around to suit different spaces. Despite its small size, this powerful device can light up an entire room with vibrant stars and nebula patterns.

2. USB Powered
   The StarPort projector is USB-powered, offering ultimate flexibility for use. You can plug it into any powered USB port, such as laptops, phone chargers, or even portable power banks, making it perfect for on-the-go use. No power outlet? No problem. The StarPort can operate from virtually any device that supports USB.

3. Multiple Lighting Modes
   This projector offers multiple lighting modes that let you select different nebula colors and laser star effects. You can switch between vibrant red, green, or blue laser stars, and pair them with a soothing nebula for a fully customizable lighting experience. It’s perfect for creating a relaxing atmosphere, whether you’re setting up a cozy bedroom ambiance or adding a magical touch to your gaming night.

4. Adjustable Brightness
   The projector includes customizable brightness settings, allowing you to adjust the intensity of the stars and nebula to fit your environment. Whether you need a gentle, dim glow for sleep or a bright, energetic display for a party, the adjustable settings ensure the light matches your mood.

5. Remote Control
   The included remote control enhances convenience by allowing you to control the lighting settings from across the room. Whether you want to change colors, adjust brightness, or turn the device on and off, the remote puts full control in your hands without having to physically interact with the projector.

6. Quiet Operation
   The StarPort projector operates quietly, ensuring it won’t disturb you while in use. This makes it an excellent option for bedrooms or relaxation spaces where peace and quiet are essential. The noise-free operation ensures you can enjoy the starry ambiance without distractions.

7. Ultra-Portability
   The StarPort projector’s ultra-portable design allows it to fit comfortably in your pocket, so you can take it anywhere. Whether you’re going on a family trip or simply moving from room to room, you can carry this projector with ease. The projector can transform any space into a starry wonderland, making it an ideal travel companion.

8. Flexible USB Extender
   The StarPort comes with a flexible USB extender, which allows for easy placement. You can adjust the direction of the light to shine stars exactly where you want them, ensuring that you get the perfect effect every time. This flexibility makes it ideal for placing on desks, nightstands, or even attaching it to portable power banks during outdoor trips.

9. Brilliant Laser Stars
   The projector creates brilliant laser stars in red, green, or blue, giving you a dynamic range of color choices. These stars can fill an entire room, bringing a magical celestial experience to your surroundings. Whether you’re using it for ambient lighting or as a centerpiece for an event, the star effects are sure to captivate.

1-YEAR LIMITED WARRANTY

Subject to the terms and conditions below, BlissLights LLC, San Marcos, California, U.S.A 92069 (“BlissLights”) warrants to the original retail purchaser that the BlissLights’ product (the “Product”) will be free of defects in material and workmanship for a period of ONE (1) YEAR from the date of original retail purchase (the “Limited Warranty”). For purposes of this Limited Warranty, an “original retail purchaser” is an individual or entity who purchases the Product (i) from www.blisslights.com, (ii) through a phone order placed directly to BlissLights, or (iii) from an authorized BlissLights distributor or retailer (an “Authorized Reseller”) and with the intent to use the Product for personal consumer use and not with the intent to resell the Product.
THIS LIMITED WARRANTY IS NOT TRANSFERABLE OR ASSIGNABLE. IF YOU PURCHASE THE PRODUCT FROM ANY PERSON OR ENTITY OTHER THAN BLISSLIGHTS OR A BLISS LIGHTS AUTHORIZED RESELLER, THIS LIMITED WARRANTY IS VOID AND THE PURCHASE IS MADE ON AN “AS-IS” BASIS WITH ALL FAULTS.
If you have questions regarding whether a certain person or entity is a BlissLights Authorized Reseller, please contact us before making your purchase.

The Limited Warranty does not cover or apply to the following:

1. loss, damage or failure due to alteration, modification or damage to the Product;
2. loss, damage or failure due to normal wear, tear, rust, abuse, improper maintenance, improper installation, improper storage and/or improper use;
3. the finish on any portion of the Product, such as surface and/or weathering, as this is considered normal wear; and/or
4. loss, damage for failure due to accident, misuse, abuse and/or negligence or any failure not relating to defects in material or workmanship.

Within thirty (30) days of discovery of any claimed defect in the Product, you must return the Product, along with a written description of the alleged defect, and a valid proof of purchase or copy thereof, to BlissLights (the “Warranty Claim”). The Warranty Claim (including the Product), should be sent, postage prepaid, to BlissLights LLC, 1224 Exposition Way, Suite #130, San Diego, Ca 92154. If BlissLights determines that the returned Product is defective, BlissLights will, within thirty (30) days of its receipt of the Warranty Claim (including the Product), at its election, either repair or replace the returned Product or refund the purchase price. The determination whether a returned Product is defective shall be made by BlissLights in its sole discretion with consideration given to the overall performance of the returned Product. If BlissLights determines the returned Product is defective, BlissLights will reimburse the postage. If BlissLights determines the return Product is not defective, BlissLights may charge for any postage and other handling costs it incurs. Your failure to comply with the aforementioned conditions will invalidate the Limited Warranty and BlissLights shall not have any obligation or liability with respect to the Product.

THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED. EXCEPT FOR THE LIMITED WARRANTY EXPRESSLY PROVIDED HEREIN, THE PRODUCT IS PROVIDED SOLELY ON AN “AS IS” BASIS WITH ALL FAULTS, AND BLISSLIGHTS MAKES NO WARRANTIES OF ANY KIND. BLISSLIGHTS HEREBY DISCLAIMS ANY AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

THE REPAIR OR REPLACEMENT OF THE PRODUCT OR THE REFUND OF THE PURCHASE PRICE ARE THE SOLE AND EXCLUSIVE REMEDIES FOR BLISSLIGHTS’ BREACH OF THIS LIMITED WARRANTY. IN NO EVENT SHALL BLISSLIGHTS BE LIABLE TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, CONTINGENT, PUNITIVE OR EXEMPLARY DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER, INCLUDING, WITHOUT ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, BLISSLIGHTS’ ENTIRE AGGREGATE LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT.
Some countries/states may not allow the exclusion or limitation of certain warranties and/or consequential, and, therefore, the exclusions and limitations above may not apply fully to you. The exclusions and limitations above shall apply to the maximum extent permitted under applicable law.
If any term is held to be invalid or unenforceable it shall be severed from this Limited Warranty and the remaining terms of this Limited Warranty shall not be affected.
This Limited Warranty is effective for Products purchased on or after June 30, 2018.
BlissLights reserves the right to modify this Limited Warranty from time to time. Any modification of this Limited Warranty shall be effective for all Products purchased on or after the effective date of such modification.
CAUTION
This is not a toy. Young children must be supervised while using this device at all times.
This unit is not waterproof. Use and store indoors or in a dry place.
CLEANING INSTRUCTIONS
Surface clean only with a soft, dry cloth. Unplug unit before cleaning.
DISPOSAL
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Designed in the USA
By BlissLights, LLC San Marcos, CA 92069
www.blisslights.com

FAQs

What is the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector is a compact, portable device that projects colorful laser stars and nebula effects, transforming any room into a mesmerizing starry night sky.

How is the BlissLights ‎900-00032 USB Laser Star Projector powered?

The BlissLights ‎900-00032 USB Laser Star Projector is powered via USB, allowing it to be connected to laptops, phone chargers, or any other USB power source.

What lighting modes are available on the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector offers multiple lighting modes, including blue, red, and green nebula effects combined with laser stars to create a variety of ambiance settings.

What kind of effects does the BlissLights ‎900-00032 USB Laser Star Projector create?

The BlissLights ‎900-00032 USB Laser Star Projector creates a stunning display of colorful laser stars and nebula clouds, perfect for transforming any room into a starry atmosphere.

How do you control the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector can be controlled via a button on the device or with the included remote control, allowing you to adjust settings from across the room.

What colors does the BlissLights ‎900-00032 USB Laser Star Projector offer?

The BlissLights ‎900-00032 USB Laser Star Projector features brilliant laser stars in red, green, or blue, combined with nebula effects in matching colors for a dynamic display.

How big is the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector is compact, with dimensions of 2.91 x 2.91 x 2.29 inches, making it easy to fit into any space or carry in your pocket.

What is included with the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector package includes the projector, a USB cable, a remote control, and an instruction manual for easy setup.

Can I use the BlissLights ‎900-00032 USB Laser Star Projector for outdoor events?

While the BlissLights ‎900-00032 USB Laser Star Projector is designed for indoor use, it can be used outdoors if properly protected from weather elements and powered by a portable USB device.

What kind of warranty comes with the BlissLights ‎900-00032 USB Laser Star Projector?

The BlissLights ‎900-00032 USB Laser Star Projector typically comes with a limited warranty. You can check with the manufacturer for specific warranty details.

How far can the BlissLights ‎900-00032 USB Laser Star Projector project its effects?

The BlissLights ‎900-00032 USB Laser Star Projector can cover up to 400 square feet, making it ideal for small to medium-sized rooms, and ensuring a wide area of starry illumination.

Video-BlissLights ‎900-00032 USB Laser Star Projector

Download this Manual:BlissLights ‎900-00032 USB Laser Star Projector User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>