BlissLights Sky-Evolve-B-RCWB Sky Lite Evolve Galaxy Projector User Guide
- June 5, 2024
- BlissLights
Table of Contents
BlissLights Sky-Evolve-B-RCWB Sky Lite Evolve Galaxy Projector
Important Health & Safety Notice
PHOTOSENSITIVE EPILEPSY: IF YOU HAVE A HISTORY OF EPILEPSY OR SEIZURES, CONSULT A DOCTOR BEFORE USE. CERTAIN PATTERNS MAY TRIGGER SEIZURES WITH NO PRIOR HISTORY. BEFORE USING THIS PRODUCT, CAREFULLY READ THE INSTRUCTION MANUAL.
Important Health & Safety Information
Seizures induced by light stimulation (Photosensitive Epilepsy) If you have an
epileptic condition or have had seizures, consult your doctor prior to using
this product. Some individuals are sensitive to flashing or flickering lights
or geometric shapes and patterns may have an undetected epileptic condition
and may experience epileptic seizures when playing video games or watching
visual content. DISCONTINUE USE IMMEDIATELY and consult your doctor if you
experience any of the following health problems or symptoms when watching
visual effects by our product: Eye soreness, altered vision, migraine, muscle
twitching, convulsion or other involuntary movements, blackout, loss of
awareness, or confusion or disorientation.
In addition to the above, DISCONTINUE USE IMMEDIATELY if you experience any
of the following symptoms:
Headache, dizziness, nausea, fatigue, similar symptoms to motion sickness,
or discomfort or pain in any body part such as eyes, ears, hands, arms, or
feet whilst watching. If the condition persists, seek medical attention.
INTRODUCTION
Thank you for purchasing the BlissLights Sky® Lite Evolve Laser Galaxy Projector. This product is a unique indoor light fixture that uses patented laser and holographic technology to project thousands of moving pin-points of light against a transforming nebula cloud. Sleep under the stars, create a romantic starlit dinner or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience. Each unit provides up to 30 x 30 ft of coverage. It has maximum electrical usage of fewer than 10 Watts and operates in temperatures between 14°F to 95°F (-10°C to 40°C).
BEFORE YOU BEGIN
Immediately upon receiving the fixture, carefully unpack and check the carton
contents to ensure that all parts are present and in good condition. Notify
the retailer immediately and retain packing material for inspection if any
parts appear damaged from shipping or the carton itself shows signs of
mishandling. Save the carton and all packing materials. In the event that the
fixture must be returned, it is important that the fixture be returned in the
original factory box. Please see the parts list below for box contents.
PARTS LIST
- Projector
- Base
- USB-C Power Cord
- USB Wall Adapter
IMPORTANT NOTE:
Use only manufacturer-provided adapters. The use of 3rd party adapters may
damage the unit and void the warranty.
SETTING UP THE PROJECTOR
Before operating your laser projector, please read the “Before you Begin” section and “Notice” sections of this user’s guide.
- Remove protective film sticker from laser aperture.
- Insert the USB power cord into a powered USB port or use the included wall adapter to connect to an available electrical outlet. It is best practice for users to connect the power adapter to the wall before connecting the device to the power adapter.
- Place the Sky® Lite Evolve in its included base on a flat solid surface and aim toward desired ceiling/wall.
- Press the power button located on the power cord. The nebula and laser stars will gradually illuminate and begin moving by default.
- Press the button again to cycle through default effects, and any custom effects created in the BlissHome app. To pair with the BlissHome app or a smart device, press and hold the button until it begins flashing.
- To turn off the light, cycle through the power effect modes until the unit turns off completely. Remove the power plug from the electrical outlet.
WIFI APP PAIRING
Sky Lite Evolve can be paired with our BlissHome app (available for free from
the App Store or Google Play Store). The app allows users to control device
settings from a phone or tablet and provides extra features such as custom
nebula color modes, speed control, and many other features. You can also set
up Google Home or Alexa voice control through the app.
DEFAULT SETTINGS
Once the laser projector is plugged in, it will enter the default mode where
all effects are on. Use the button on the cord to change the effect settings.
This light has a built-in timer that is designed to automatically shut off
after 6 hours of operation. Use the BlissHome app to control brightness,
control cloud color, rotation speed, and set advanced timers.
INSTALLATION TIPS
- Do not connect the light to a dimmer pack, as a dimmer accessory may damage the laser component.
- The darker the display area, the brighter your projection will appear.
PRODUCT SPECIFICATIONS
| Laser Classification | Class 2 |
|---|---|
| Laser Color | Green – 510±5nm, Blue – 445±5nm |
| Nebula Cloud Color | RCBW |
| Housing | ABS+PC plastic |
| Power consumption | Less than 10 W |
| USB Power Adapter Input | 100-240 V ~ 50/60 Hz, 0.2 A |
| USB Power Adapter Output | 5V — 2A |
| Operation | Indoor |
| Operating Temperature | 14°F to 95°F (-10°C to 40°C) |
| Projection Coverage | Laser – 30 x 30 ft Nebula cloud – 15 x 15ft |
| Maintenance | Maintenance Free |
| Dimensions | Projector (5.25” Sphere) + Base (Diameter 4” x 1”) |
| Cord Length | 5 ft (1.5 m) |
FCC STATEMENT NOTICE
CAUTION
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation. This product is classified as a Class 2 laser
product and complies with the applicable parts of IEC/EN 60825-1 Ed. 2.0:2007
and Ed. 3.0:2014. The manufacturer additionally certifies it complies with the
US FDA Federal Laser Product Performance Standard (FLPPS) provided in 21 CFR
Subchapter J, 1040.10 and 1040.11 except for allowable deviations specified in
FDA Guidance documents.
Do not stare into the beams emitted from the product. Intentional long-term viewing of CLASS 2 levels of laser light can be hazardous. This product uses diffractive optics to scatter the beam energy. This scattering effect causes the energy concentration to drop below the exposure limits for momentary or accidental viewing at a relatively short distance from the laser aperture. As with all bright light sources, when you operate this device in unsupervised general public areas, it is recommended that up-close access to the light be restricted or prevented and the beams are directed into locations where persons are not expected. This laser display device incorporates a CLASS 3B laser system which, by itself, may be hazardous. However, this laser display product incorporates a protective housing and diffractive optics in its design so that there is no exposure or human access to laser radiation during operation above the CLASS 2 limits. Each individual laser beamlet’s power is below the Class 2 limit of 1 mW.
UNDER NO CIRCUMSTANCES
Shall attempts be made to open the protective housing or operate the device if
the aperture window is damaged? All service to this laser display device
requiring the protective housing to be opened and/ or removed shall be
performed by service personnel or their authorized agents. Opening the
protective housing voids the warranty. NO LASERS SHOULD BE POINTED INTO THE
SKY WITHIN 10 NAUTICAL MILES (18.5 km) OF AN AIRPORT. IF YOU ARE LOCATED
WITHIN THIS SPECIFIC PERIMETER, WE RECOMMEND THE LASERS BE POINTED DOWN AT THE
GROUND SO NO STRAY BEAMS ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL
AIRPORT OR PROVINCIAL GUIDELINES FOR FURTHER INFORMATION.
PHOTOSENSITIVE EPILEPSY: IF YOU HAVE A HISTORY OF EPILEPSY OR SEIZURES, CONSULT A DOCTOR BEFORE USE. CERTAIN PATTERNS MAY TRIGGER SEIZURES WITH NO PRIOR HISTORY. BEFORE USING THIS PRODUCT, CAREFULLY READ THE INSTRUCTION MANUAL.
Important Health & Safety Information
Seizures induced by light stimulation (Photosensitive Epilepsy) If you have an
epileptic condition or have had seizures, consult your doctor prior to using
this product. Some individuals are sensitive to flashing or flickering lights
or geometric shapes and patterns may have an undetected epileptic condition
and may experience epileptic seizures when playing video games or watching
visual content. DISCONTINUE USE IMMEDIATELY and consult your doctor if you
experience any of the following health problems or symptoms when watching the
visual effects of our product: Eye soreness, altered vision, migraine, muscle
twitching, convulsion or other involuntary movements, blackout, loss of
awareness, or confusion or disorientation.
In addition to the above, DISCONTINUE USE IMMEDIATELY if you experience any
of the following symptoms:
Headache, dizziness, nausea, fatigue, similar symptoms to motion sickness, or
discomfort or pain in any body part such as eyes, ears, hands, arms, or feet
whilst watching. If the condition persists, seek medical attention.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>