BLISSLIGHTS PIXXI Laser Projector User Guide

: June 4, 2024
: BlissLights

Table of Contents

BLISSLIGHTS PIXXI Laser Projector
INTRODUCTION
BEFORE YOU BEGIN
PARTS LIST
SETTING UP THE LASER PROJECTOR
LIST OF INCLUDED PROJECTIONS
INSTALLATION TIPS
DEFAULT SETTINGS
PRODUCT SPECIFICATIONS
1-YEAR LIMITED WARRANTY
TROUBLESHOOTING
CLEANING INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLISSLIGHTS PIXXI Laser Projector

INTRODUCTION

Thank you for purchasing the BlissLights PIXXI Laser Projector. This product is a unique indoor/outdoor light fixture that uses patented laser technology to project your favorite images for year-round applications. We hope you enjoy this incredibly unique lighting experience.

BEFORE YOU BEGIN

Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned, it is important that the fixture be returned in the original factory box. Please see parts list below for box contents.

PARTS LIST

PIXXI Laser Projector
Tripod
Ground stake and 1/4-20 adapter
Remote Control
Power Adapter
Allen Key to adjust tripod
Cleaning cloth
Accessory carrying bag

SETTING UP THE LASER PROJECTOR

Connect the power supply into an available standard electrical outlet.
Place the PIXXI on a flat solid surface and aim toward desired ceiling/wall/tree.
Aim the remote control at the front window and press the POWER button.
To change the illumination angle on projection surfaces, adjust any leg of the tripod. If tripod is loose, use the supplied Allen Wrench to tighten the screw on the underside of the tripod screw-in knuckle.
Use the following buttons to control lighting effects:
a. Power – Use this button to turn the power on and off.
b. Orientation – use this button to rotate the image 90 degrees.
c. Enlarge – use this button to make the image bigger.
d. Reduce – Use this button to make the image smaller.
e. Right Arrow – use this button to select the next image projection.
f. Left Arrow – use this button to select the pervious image projection.
By default, the Pixxi will run continuously. The Preset Timer button sets a timer, which will turn Pixxi off after a designated time. Press the button once to set the play time for an hour. Double, triple, or quadruple press for 2, 3, or 4 hours respectively. Press and hold the button for continuous play.

LIST OF INCLUDED PROJECTIONS

Pixxi Dust

Bounce 1
Duet
Triplet
Bounce 2
Swirl 1
Sparkle 1
Sparkle 2
Sparkle 3
Swirl 2
Hovering fireflies
Pixxi show (~2 min)
Abstract
Abstract 1
Abstract 2
Abstract 3
Abstract show (~2 min)
Rain Valentine’s Day
Love
Heart
Wedding
Flying hearts
Wedding bells Occasions
Anniversary
Congratulations
Confetti
Graduation
Spring Holidays
Clovers
Pot of Gold
Bunny
Rabbit
Mother’s Day
Father’s Day
4th of July
Birthday
Happy Birthday
Birthday show(~2 min)
Birthday dino
Unicorn
Birthday car
Dump truck
Dance show
Halloween
Jack O’Lantern
Bats
Monster
Scary Eyes
Halloween show(~4 min)
Falling leaves
Fire
Thanksgiving
Thanksgiving
Turkey
Hanukkah
Menorah
Happy Hanukkah
Star of David
Christmas
Happy Holidays
Merry Christmas
Santa
Stocking
Snowman
Reindeer
Snowglobe
Santa sleigh
Penguin skater
Running deer
Christmas show(~4 min)
New Year
Happy New Year
Firework
Champaigne
New Year show (~2 min)
Misc
Basketball
Football
Soccer
Hockey
Golf
Surfing
Undersea show(~2 min)

INSTALLATION TIPS

Do not connect the light to a dimmer pack, as a dimmer accessory may damage the laser component.
Use only the manufacturer-provided CUL power supply.
Limit the use of extension cords. If you need an extension cord, use only UL, CUL, or CSA approved 3rd party extension cords.
The darker the display area, the brighter your projection will appear. Try to avoid display areas with strong ambient light sources, such as commercial street lights or bright security flood lights.

DEFAULT SETTINGS

Once the laser projector is plugged in, it will enter the default mode where all effects are on. Use the buttons to change the effect settings and brightness. This light runs continuously by default, but has a built-in timer that can set the light to shut off after an increment of 1 hour, 2 hours, 3 hours, or 4 hours.

PRODUCT SPECIFICATIONS

Laser Classification Class 3R
Laser Wavelength 507 nm—Green
Housing Metal and ABS plastic
Power Consumption Less than 30 W
Power Input 120 V AC
Power Output < 5 mW per beamlet
Operation Indoor/Outdoor
Operating Temperature 32°F to 104°F (0°C to 40°C)
Maintenance Maintenance Free
Dimensions 6.5”L x 2.5”W x 6.5”H
Cord Length 3 ft (1 m)
Warranty Limited One Year

1-YEAR LIMITED WARRANTY

This product carries a one (1) year warranty against defects in workmanship and materials. BlissLights, LLC agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. For more detailed warranty information, please visit www.blisslights.com/warranty

TROUBLESHOOTING

We are always happy to help! To talk to a helpful team member, send an email to [email protected] or call our support line at 888-868-4603.

CAUTION
This is not a toy. Young children must be supervised while using this device at all times.

CLEANING INSTRUCTIONS

Surface clean only with a soft, dry cloth. Unplug unit before cleaning.
DISPOSAL
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.