BLISSLIGHTS OBLIVIA-BLK-RGB IP65 Outdoor Nebula Cloud Projector User Guide

BLISSLIGHTS OBLIVIA-BLK-RGB IP65 Outdoor Nebula Cloud Projector

Product Information

The ObliviaTM is a unique outdoor light fixture that uses patented holographic technology to project a transforming nebula cloud. This product is available in four different models: OBLIVIA-BLK-RGB, OBLIVIA-BLK-WHT, OBLIVIA-WHT-RGB, and OBLIVIA-WHT-WHT. The package includes the following parts: projector, stake, power cord, and power adapter.

Important Safety Instructions

• Always unplug the furnishing from the electrical outlet before cleaning or servicing.
• Use only the manufacturer-provided cord and adapter.
• Changes or modifications not approved by the manufacturer could void the user’s authority to operate the equipment.

Important Health & Safety Information

If you have a history of epilepsy or seizures, consult a doctor before using the ObliviaTM. Certain patterns may trigger seizures even without prior history. Discontinue use immediately and consult a doctor if you experience any health problems or symptoms such as eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, confusion, disorientation, headache, dizziness, nausea, fatigue, symptoms similar to motion sickness, or discomfort or pain in any body part. If the condition persists, seek medical attention.

Product Usage Instructions

Setting Up the Projector

1. Read the “Before you Begin” section and “Notice” section of the user’s guide before operating the projector.
2. Connect the power cord (end 3A) to the wall power adapter (4) and tightly fasten the rounded cover.
3. Connect the other end of the power cord (3B) to the two-pin socket on the ObliviaTM (1) and screw the rounded cover tightly to ensure proper protection from water leaks.
4. Plug the wall power adapter into a 110/120V power outlet that is leak safe and suitable for outdoor use.

Note : Use only the manufacturer-provided adapter. Using 3rd party adapters may damage the unit and void the warranty. The adapter may vary from the picture shown.
Models : OBLIVIA-BLK-RGB, OBLIVIA-BLK-WHT, OBLIVIA-WHT-RGB, OBLIVIA-WHT- WHT
Please ONLY use manufacturer-provided cord and adapter.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).

DANGER – To reduce the risk of electric shock:

1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged USB Wall Adapter, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove the plug from the outlet.

Important Health & Safety Notice

PHOTOSENSITIVE EPILEPSY: IF YOU HAVE A HISTORY OF EPILEPSY OR SEIZURES, CONSULT A DOCTOR BEFORE USE. CERTAIN PATTERNS MAY TRIGGER SEIZURES WITH NO PRIOR HISTORY. BEFORE USING THIS PRODUCT, CAREFULLY READ THE INSTRUCTION MANUAL.

Important Health & Safety Information

• Seizures induced by light stimulation (Photosensitive Epilepsy)
• If you have an epileptic condition or have had seizures, consult your doctor before using this product.
• Some individuals are sensitive to flashing or flickering lights or geometric shapes and patterns, may have an undetected epileptic condition, and may experience epileptic seizures when playing video games or watching visual content.

DISCONTINUE USE IMMEDIATELY and consult your doctor if you experience any of the following health problems or symptoms when watching the visual effects of our product:
Eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, or confusion or disorientation.

In addition to the above, DISCONTINUE USE IMMEDIATELY if you experience any of the following symptoms:
Headache, dizziness, nausea, fatigue, similar symptoms to motion sickness, or discomfort or pain in any body part such as eyes, ears, hands, arms, and feet whilst watching.
If the condition persists, seek medical attention

INTRODUCTION

Thank you for purchasing the BlissLights Oblivia Projector. This product is a unique outdoor light fixture that uses patented holographic technology to project a transforming nebula cloud. Light up your garden, accent your patio, or illuminate your path with dazzling nebula clouds. We hope you enjoy this incredibly unique lighting experience.
Each unit provides up to 15 x 15 ft of coverage. It has a maximum electrical usage of 10 Watts and operates in temperatures between -22°F to 86°F (-30°C to 30°C).

BEFORE YOU BEGIN

Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain the packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. If the fixture must be returned, the fixture must be returned in the original factory box. Please see parts list below for box contents.

PARTS LIST

1. Projector
2. Stake
3. Power Cord
4. Power Adapter

IMPORTANT NOTE:
Use only manufacturer-provided adapter. Use of 3rd party adapters may damage the unit and void the warranty. The adapter may vary from picture shown.

SETTING UP THE PROJECTOR

Before operating your nebula projector, please read the “Before you Begin” section and “Notice” section of this user’s guide

1. Connect power cord (end 3A, as shown on page 3) to the wall power adapter (4) and tightly fasten the rounded cover. Connect the end (3B) of the power cord to the two-pin socket on Oblivia (1) and screw the rounded cover tightly to ensure proper protection from water leaks
2. Plug the wall power adapter to a 110/120V power outlet that is leak-safe and suitable for outdoor use.
3. Press the power button located on the back of the unit. The effect will gradually illuminate and begin moving by default.
4. Place the BlissLights® Oblivia in the ground using the included stake, or use the optional tripod accessory (sold separately) on a flat surface. Aim toward desired foliage/area.
5. Press the power button again to cycle through default effects. To pair with the BlissHome app, simply power on Oblivia, and it should appear automatically in the app pairing screen.
6. To turn off the light, use the app or press the button to cycle through the effect modes until the unit turns off completely. Remove the power plug from the electrical outlet

WIFI APP PAIRING

Oblivia can be paired with our BlissHome app (available for free from the App Store or Google Play Store). The app allows users to control device settings from a phone or tablet and provides extra features such as custom nebula color modes, speed control, and many other features. You can also set up Google Home or Alexa voice control through the app.

SCAN TO DOWNLOAD APP

DEFAULT SETTINGS

Once the projector is plugged in, it will enter the default mode where all effects are on. Use the button on the unit to change the effect settings. Or, use the BlissHome app to control brightness, control effect color, set rotation speed, and use advanced timers.

INSTALLATION TIPS

• Do not connect the light to a dimmer pack, as a dimmer accessory may damage internal components.
• The darker the display area, the brighter your projection will appear

PRODUCT SPECIFICATIONS

OBLIVIA-WHT-RGB, OBLIVIA-WHT-WHT

Housing| ASA plastic
FCC ID| 2ANDL-CBU | IC 23243-CBU
Power consumption| 10 W
Electrical rating| 100-240V~ 50-60HZ, 0.2A(Input), 5VDC, 2.0A(Output)
Power Adapter Input| 100-240 V ~ 50/60 Hz, 0.2 A
Power Adapter Output| 5VDC — 2A
Operation| Indoor/Outdoor
Operating Temperature| -22°F to 86°F (-30°C to 30°C)
Projection Coverage| 15 x 15ft
Maintenance| Maintenance Free
Dimensions| Projector (4.75” Sphere) + Stake (Length 12”)
Cord Length| 5 ft (1.5 m)
Water Resistance| IP65

Designed in the USA By BlissLights LLC Made in Cambodia

BLISSLIGHTS LIMITED WARRANTY

This product carries a limited warranty against defects in workmanship and materials. BlissLights LLC agrees to replace the defective product free of charge within the stated warranty period when returned by the original purchaser with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit www.blisslights.com/warranty

CAUTION

• This is not a toy. Young children must be supervised while using this device at all times.
• This unit is not waterproof. Use and store indoors or in a dry place.

CLEANING INSTRUCTIONS

Surface clean only with a soft, dry cloth. Unplug unit before cleaning.

DISPOSAL
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

blisslights.com

References

• BlissLights: #1 Laser Lights for Indoor and Outdoor Decor
• BlissLights: #1 Laser Lights for Indoor and Outdoor Decor
• Warranty – BlissLights

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>