BlissLights BlissRadia Entertainment Lamp and Night Light User Guide
- June 5, 2024
- BlissLights
Table of Contents
BlissLights BlissRadia Entertainment Lamp and Night Light
INTRODUCTION
Thank you for purchasing the BlissLights BlissRadia Ambient Light. This product is a unique indoor light fixture that creates a cascade of colored lighting with ultra smooth transitions. Simulate a sunrise to wake up peacefully in the morning, place it next to your work desk for calming ambiance, or enjoy anywhere you could use an extra pop of color.
BEFORE YOU BEGIN
Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned, it is important that the fixture be returned in the original factory box. Please see parts list below for box contents.
PARTS LIST:
- BlissRadia LED Light
- USB Power Cord
- Power adapter
Please note:
Included adapter may vary from picture shown.
SETTING UP THE LIGHT
- Insert the USB power cord into a powered USB port or use the included wall adapter to connect to an available electrical outlet. It is best practice for users to connect the power adapter to the wall before connecting the device to the power adapter.
- Place the light on a flat solid surface, either upright or horizontally as desired.
- Press the power button. The light will immediately begin to glow.
- The light can be controlled via the button controls detailed below, or synced to the BlissLights app, Google Home, or Alexa via WIFI. To enter smart pairing mode, press and hold the button while the light is off. Once the light begins flashing, it is ready to be connected.
- To turn off the light, press and hold the button until it turns off.
- Use the following button controls to manage lighting effects:
Single button control:
- Press once to power on.
- Rotate the disc to adjust brightness.
- Press once to change mode.
- Double press to change color within each mode.
- Press and hold to power off.
- To enter smart pairing mode: while the light is off, press and hold until the light begins flashing.
DOWNLOAD THE APP
You can control this light and additional BlissLights through our free app! Scan the QR code to download.
PRODUCT SPECIFICATIONS
| LED Classification | RGBIC |
|---|---|
| Housing | ABS plastic |
| USB Power Adapter Input | 100-240 V ~ 50/60 Hz , 0.2 A |
| USB Power Adapter Output | 5V — 2A |
| Operation | Indoor |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Maintenance | Maintenance Free |
| Dimensions | 7” x 7” x 3” |
| Cord Length | 5 ft (1.5 m) |
| Smart Compatibility | BlissLights App, Alexa, Google Home |
| Wi-Fi Connection | 2.4GHz |
BLISSLIGHTS LIMITED WARRANTY
This product carries a limited warranty against defects in workmanship and materials. BlissLights LLC agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit www.blisslights.com/warranty
CAUTION
This is not a toy. Young children must be supervised while using this
device at all times. This unit is not waterproof. Use and store indoors or in
a dry place.
CLEANING INSTRUCTIONS
Surface clean only with a soft, dry cloth. Unplug unit before cleaning.
DISPOSAL
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
BlissLights LLC
Oceanside, CA
Made in China
www.blisslights.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>