BLISSLIGHTS RCWB Sky Lite Evolve LED Galaxy Cloud Projector User Guide

BLISSLIGHTS RCWB Sky Lite Evolve LED Galaxy Cloud Projector

NOTICE

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Important Health & Safety Notice

PHOTOSENSITIVE EPILEPSY: IF YOU HAVE A HISTORY OF EPILEPSY OR SEIZURES, CONSULT A DOCTOR BEFORE USE. CERTAIN PATTERNS MAY TRIGGER SEIZURES WITH NO PRIOR HISTORY. BEFORE USING THIS PRODUCT, CAREFULLY READ THE INSTRUCTION MANUAL.

Important Health & Safety Information

Seizures induced by light stimulation (Photosensitive Epilepsy) If you have an epileptic condition or have had seizures, consult your doctor prior to using this product. Some individuals are sensitive to flashing or flickering lights or geometric shapes and patterns, may have an undetected epileptic condition and may experience epileptic seizures when playing video games or watching visual content. DISCONTINUE USE IMMEDIATELY and consult your doctor if you experience any of the following health problems or symptoms when watching visual effects by our product: Eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, or confusion or disorientation. In addition to the above, DISCONTINUE USE IMMEDIATELY if you experience any of the following symptoms: Headache, dizziness, nausea, fatigue, similar symptoms to motion sickness, or discomfort or pain in any body part such as eyes, ears, hands, arms, feet whilst watching. If the condition persists, seek medical attention

INTRODUCTION

Thank you for purchasing the BlissLights Cloud Nebula Projector. This product is a unique indoor light fixture that uses patented holographic technology to project a transforming nebula cloud. Sleep under the shifting sky, create a romantic dinner, or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience. Each unit provides up to 15 x 15 ft of coverage. It has maximum electrical usage of 10 Watts and operates in temperatures between 14°F to 95°F (-10°C to 40°C).

BEFORE YOU BEGIN

Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned, it is important that the fixture be returned in the original factory box. Please see parts list below for box contents

PARTS LIST

1. Projector
2. Base
3. USB-C Power Cord
4. USB Wall Adapter

IMPORTANT NOTE:

Use only manufacturer-provided adapter. Use of 3rd party adapters may damage the unit and void the warranty. Adapter may vary from picture shown

SETTING UP THE PROJECTOR

Before operating your nebula projector, please read the “Before you Begin” section and “Notice” section of this user’s guide

1. Remove any protective film stickers from aperture.
2. Insert the USB power cord into a powered USB port or use the included wall adapter to connect to an available electrical outlet. It is best practice for users to connect the power adapter to the wall before connecting the device to the power adapter.
3. Place the BlissLights® Cloud in its included base on a flat solid surface and aim toward desired ceiling/wall.
4. Press the power button located on the power cord. The nebula will gradually illuminate and begin moving by default.
5. Press the button again to cycle through default and preset effects. To pair with the BlissHome app or a smart device, press and hold the button until it begins flashing.
6. To turn off the light, cycle through the power effect modes until the unit turns off completely. Remove the power plug from electrical outlet.

WIFI APP PAIRING

BlissLights Cloud can be paired with our BlissHome app (availble for free from the App Store or Google Play Store). The app allows users to control device settings from a phone or tablet, and provides extra features such as custom nebula color modes, speed control, and many other features.  You can also set up Google Home or Alexa voice control through the app.

SCAN TO DOWNLOAD APP

DEFAULT SETTINGS

Once the projector is plugged in, it will enter the default mode where all effects are on. Use the button on the cord to change the effect settings. This light has a built-in timer that is designed to automatically shut off after 6 hours of operation. Use the BlissHome app to control brightness, control cloud color, rotation speed, and set advanced timers.

INSTALLATION TIPS

• Do not connect the light to a dimmer pack, as a dimmer accessory may damage internal components.
• The darker the display area, the brighter your projection will appear.

PRODUCT SPECIFICATIONS

BLISSLIGHTS LIMITED WARRANTY

This product carries a limited warranty against defects in workmanship and materials. BlissLights LLC agrees to replace the defective product free of charge within the stated warranty period when returned by the original purchaser with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit www.blisslights.com/warranty

CAUTION

This is not a toy. Young children must be supervised while using this device at all times. This unit is not waterproof. Use and store indoors or in a dry place.

CLEANING INSTRUCTIONS

Surface clean only with a soft, dry cloth. Unplug the unit before cleaning.

DISPOSAL

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>