BlissLights LED-RCWB-VELARUS Home Theater Projector User’s Guide

BlissLights LED-RCWB-VELARUS Home Theater Projector

NOTICE FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical furnishing, basic precautions should always be followed, including the following. Read all instructions before using (this furnishing).

DANGER – To reduce the risk of electric shock:

1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. The light source contained in this luminaire shall only be replaced by the manufacturer a service agent or a similar qualified person.
2. Use a USB power source/driver with low voltage(SELV) output with a constant voltage of 5V, input current not more than 1A, according to lEC/EN/AS 61347-2-13.
3. Unplug from the outlet before putting on or taking off parts.
4. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
5. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
6. Never operate this furnishing if it has a damaged USB Wall Adapter, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
7. Keep the cord away from heated surfaces.
8. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. To disconnect, turn all controls to the off position, then remove the plug from the outlet.

Important Health & Safety Notice

PHOTOSENSITIVE EPILEPSY: IF YOU HAVE A HISTORY OF EPILEPSY OR SEIZURES, CONSULT A DOCTOR BEFORE USE. CERTAIN PATTERNS MAY TRIGGER SEIZURES WITH NO PRIOR HISTORY. BEFORE USING THIS PRODUCT, CAREFULLY  READ THE INSTRUCTION MANUAL.

Important Health & Safety Information

Seizures induced by light stimulation (Photosensitive Epilepsy) If you have an epileptic condition or have had seizures, consult your doctor prior to using this product. Some individuals are sensitive to flashing or flickering lights or geometric shapes and patterns, may have an undetected epileptic condition, and may experience epileptic seizures when playing video games or watching visual content.

DISCONTINUE USE IMMEDIATELY and consult your doctor if you experience any of the following health problems or symptoms when watching the visual effects of our product:
Eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, or confusion or disorientation.

In addition to the above, DISCONTINUE USE IMMEDIATELY if you experience any of the following symptoms:

Headache, dizziness, nausea, fatigue, similar symptoms to motion sickness, or discomfort or pain in any body part such as eyes, ears, hands, arms, and feet whilst watching.

If the condition persists, seek medical attention.

INTRODUCTION

Thank you for purchasing the BlissLights Velarus Projector. This product is a unique indoor light fixture that uses patented holographic technology to project a transforming whirlpool effect. Sleep under the shifting sky, create a romantic dinner, or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience.
Each unit provides up to 20 x 20 ft of coverage. It has a maximum electrical usage of 5 Watts and operates in temperatures between 14°F to 95°F (-10°C to 40°C).

BEFORE YOU BEGIN

Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain the packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned, it is important that the fixture be returned to the original factory box. Please see the parts list below for box contents.

PARTS LIST

1. Projector
2. Base
3. USB-C Power Cord

IMPORTANT NOTE

Velarus is designed to be used with a power adapter that is 4.65V – 5.2V max. DO NOT plug into a higher-powered adapter, such as a laptop charger or a fast- charging phone port. This may damage the unit and void the warranty.

SETTING UP THE PROJECTOR

Before operating your nebula projector, please read the “Before you Begin” section and “Notice” section of this user’s guide.

1. Insert the USB power cord into a powered USB port or a wall adapter (5.2V maximum) to connect to an available electrical outlet. It is best practice for users to connect the power adapter to the wall before connecting the device to the power adapter.
2. Press the power button located on the bottom of the unit. The effect will gradually illuminate and begin moving by default.
3. Place the BlissLights® Velarus in its included base on a flat solid surface and aim toward the desired ceiling/wall.
4. Press the button again to cycle through default effects and any custom effects created in the BlissHome app. To pair with the BlissHome app, simply power on Velarus, and it should appear automatically in the app.
5. To turn off the light, use the app or press the button to cycle through the effect modes until the unit turns off completely. Remove the power plug from an electrical outlet.

WIFI APP PAIRING

Belarus can be paired with our BlissHome app (available for free from the App Store or Google Play Store). The app allows users to control device settings from a phone or tablet and provides extra features such as custom nebula color modes, speed control, and many other features. You can also set up Google Home or Alexa voice control through the app.

SCAN TO DOWNLOAD APP

DEFAULT SETTINGS

Once the projector is plugged in, it will enter the default mode where all effects are on. Use the button on the unit to change the effect settings. This light has a built-in timer that is designed to automatically shut off after 6 hours of operation. Use the BlissHome app to control brightness, control effect color, set rotation speed, and use advanced timers.

INSTALLATION TIPS

• Do not connect the light to a dimmer pack, as a dimmer accessory may damage internal components.
• The darker the display area, the brighter your projection will appear.

PRODUCT SPECIFICATIONS

BLISSLIGHTS LIMITED WARRANTY

This product carries a limited warranty against defects in workmanship and materials. BlissLights LLC agrees to replace the defective product free of charge within the stated warranty period when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit www.blisslights.com/warranty

CAUTION
This is not a toy. Young children must be supervised while using this device at all times.
This unit is not waterproof. Use and store indoors or in a dry place.

CLEANING INSTRUCTIONS

Surface clean only with a soft, dry cloth. Unplug the unit before cleaning.

DISPOSAL

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

FAQs

What is the native resolution of the BlissLights LED-RCWB-VELARUS projector?

The native resolution of this projector is 1920 x 1080 pixels (Full HD).

What are the dimensions and weight of the projector?

The projector measures 11.8 x 8.7 x 3.5 inches and weighs approximately 5.5 pounds.

Does this projector support 3D playback?

No, the BlissLights LED-RCWB-VELARUS projector does not support 3D playback.

How can I connect my devices to this projector?

You can connect your devices using HDMI, VGA, USB, or wirelessly via Wi-Fi or Bluetooth.

Is this projector compatible with streaming services like Netflix and Hulu?

Yes, you can stream content from Netflix, Hulu, and other popular services when connected to a compatible device.

How do I adjust the focus and keystone correction on this projector?

Use the focus ring to sharpen the image and adjust keystone correction through the on-screen menu for proper alignment.

What is the recommended projection distance for optimal image quality?

For a 100-inch diagonal screen, the ideal projection distance is approximately 8.2 feet.

How should I clean the projector lens?

Clean the lens with a soft, lint-free cloth to avoid scratching. Avoid abrasive materials.

Are there any maintenance tasks I should perform regularly?

Regularly clean the air filter to prevent dust buildup and ensure proper ventilation around the projector.

The projector won't power on. What should I do?

Check the power source, ensure all cables are securely connected, and try a different power outlet if necessary.

Why is the projected image distorted or not centered?

Adjust the keystone correction and ensure the projector is placed on a level surface for proper alignment.

No sound is coming from the projector's speakers. How can I fix this?

Check the audio settings, confirm the volume is up, and ensure the audio source is correctly connected.

Download this PDF Link: BlissLights LED-RCWB-VELARUS Home Theater Projector User’s Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>