nVent CADDY CRLJ37EG Caddy Rod Lock Bar Joist Hanger Owner’s Manual
- September 12, 2024
- nVent Caddy
Table of Contents
nVent CADDY CRLJ37EG Caddy Rod Lock Bar Joist Hanger
Specifications
- Catalog Number : CRLJ37EG
- Material: Steel
- Finish : Electrogalvanized
- Static Load Safety Factor : 3.5:1
- Rod Size (RS): 3/8
- Height (H ): 7.4
- Width (W ): 3.7
- A: 5/8 – 1 1/4
- Wrench Size 1 : 9/16mm
- Wrench Size 2: 15/16mm
- Static Load (F): 1000lb
CATALOG NUMBER
FEATURES
Easily installs from underneath the bar joist
Easily installs on lower or upper truss chord of the bar joist
Plastic protection cap prevents dirt or structural coatings from obstructing
the “push-to-install” mechanism
Prefabricated assemblies easily lift and lock into place, helping to save time
and money
Easy “push-to-install” design allows installers to simply push the threaded
rod through the mounting hole, instantly holding it in position
Works with slightly damaged threads and minor burrs on the threaded rod
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Electrogalvanized
- Static Load Safety Factor: 3.5:1
- Rod Size (RS): 3/8″
- Height (H): 7.4″
- Width (W): 3.7″
- A: 5/8″ – 1 1/4″
- Wrench Size 1: 9/16mm
- Wrench Size 2: 15/16mm
- Static Load (F): 1000lb
ADDITIONAL PRODUCT DETAILS
Wrench Size 1 represents hex nut size used to tighten to bar joist. Wrench Size 2 represents nVent CADDY Rod Lock hex nut size.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
MORE INFORMATION
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
FAQ
- Q: What is the maximum static load capacity of the product?
- A: The product has a static load capacity of 1000lb with a safety factor of 3.5:1.
- Q: How do I determine the appropriate wrench size to use for installation?
- A: Wrench Size 1 is used for tightening to the bar joist, while Wrench Size 2 is specifically for the nVent CADDY Rod Lock hexnut.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>