tp-link G36 Omada Pro Gigabit VPN Gateway Instructions

: September 12, 2024
: tp-link

Table of Contents

G36 Omada Pro Gigabit VPN Gateway
Product Information
Specifications
Product Usage Instructions
Regulatory Compliance
Safety Information
- Frequently Asked Questions (FAQ)
1. What should I do if my device is exposed to water?
2. Can I use any charger to power the device?

G36 Omada Pro Gigabit VPN Gateway

Product Information

Specifications

Product Name: Omada Pro Gigabit VPN Gateway
Model Number: G36
Manufacturer: TP-Link Systems Inc.
Website: https://www.tp-link.com/us/
CE Mark: Class B
Regulatory Compliance: FCC, EU Declaration of Conformity, UKCA
Mark, Industry Canada Statement, BSMI Notice
Safety Information: Keep away from water, fire, humidity, or
hot environments; Do not disassemble or modify the device; Use only
recommended chargers

Product Usage Instructions

Regulatory Compliance

The Omada Pro Gigabit VPN Gateway complies with FCC regulations.
Users are advised to:

Reorient or relocate the receiving antenna if experiencing
interference.
Keep the device away from other equipment to avoid
interference.
Connect the equipment to a different circuit if interference
occurs.
Consult a professional for assistance if needed.

Safety Information

For safety purposes:

Avoid exposing the device to water, fire, humidity, or high
temperatures.
Do not attempt to disassemble, repair, or modify the device;
contact the manufacturer for service.
Use only undamaged chargers and USB cables recommended by the
manufacturer.
Ensure the adapter is easily accessible and installed near the
equipment.
Place the device with its bottom surface downward for
stability.

Frequently Asked Questions (FAQ)

1. What should I do if my device is exposed to water?

If your device comes into contact with water, immediately power
it off and disconnect it from any power source. Allow it to dry
completely before attempting to use it again. Contact customer
support for further assistance.

2. Can I use any charger to power the device?

No, it is recommended to use only the chargers provided by the
manufacturer to ensure safe and proper operation of the device. The
use of other chargers may cause damage or malfunctions.

Regulatory Compliance
Omada Pro Gigabit VPN Gateway
© 2024 TP-Link 1910013781 REV1.20.0

FCC Compliance Information Statement

Product Name: Omada Pro Gigabit VPN Gateway Model Number: G36

Component Name

Model

Power Adapter

T120100-2B1

Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Name: Power Adapter Model Number: T120100-2B1 Responsible party: TP- Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: https://www .tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa @tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024/8/23

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp- link.com/en/support/ce/
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www .tp-link.com/support/ukca/
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
BSMI Notice

Pb

Hg

Cd

Cr+6

PBB

PBDE

PCB

—

1. “0.1 wt %” “0.01 wt %” 2.”” 3.”–”

, .

Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Adapter shall be installed near the equipment and shall be easily accessible. Place the device with its bottom surface downward. Use only power supplies which are provided by manufacturer and in the original packing of
this product. If you have any questions, please don’t hesitate to contact us. The operating temperature for the device shall be within 0°C to 40°C (32°F to 104°F). Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
Symbol Explanation Class II equipment
Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth
Earth
Frame or chassis Functional earthing Caution, hot surface
Caution

Operator’s manual
Stand-by
“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs

m

Switch of mini-gap construction

Switch of micro-gap construction (for US version)

µ

Switch of micro-gap / micro-disconnection construction (for

other versions except US)

Switch without contact gap (Semiconductor switching device)