nVent BC180037EG Internal Strut Beam Clamp with Bolt Owner’s Manual
- September 12, 2024
- nVent
Table of Contents
nVent BC180037EG Internal Strut Beam Clamp with Bolt
CATALOG NUMBER
BC180037EG
FEATURES
- U-shaped clip for clamping the back of strut channel to a beam
- Hex bolt included
- Requires installation in pairs
PRODUCT ATTRIBUTES
Material: Steel
Finish: Electrogalvanized
Flange Thickness (FT): 1″ Max
Width (W): 1 1/4″
Screw Diameter (Sc): 3/8″
Static Load (F): 660lb
ADDITIONAL PRODUCT DETAILS
Static Load is based on one pair of Strut Beam Clamps.
Include strut channel thickness when calculating flange thickness.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CUSTOMER SUPPORT
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
nVent.com
CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>