reolink E1 Outdoor WiFi PTZ Smart Camera User Guide
- June 3, 2024
- reolink
Table of Contents
reolink E1 Outdoor WiFi PTZ Smart Camera
What’s in the Box
Camera Introduction
Set up the Camera
Wired Setup
It is recommended that the initial setup be completed with the Ethernet cable.
You may follow the steps below to set up your camera.
Step 1 Connect the camera to a LAN port on your router with an Ethernet cable.
Step 2 Use the power adapter provided to power on the camera.
Step 3 Download and launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
On Smartphone
Scan to download the Reolink App.
On PC
Download path of the Reolink Client: Go to
https://reolink.com>Support>App&Client.
Wireless Setup
If you set up E1 Outdoor without the Ethernet cable, you may follow the steps
below. Step 1 Use the power adapter provided to power on the camera.|
Step 2 Launch the Reolink App, click the “ ” button in the top right corner to
add the camera.
Scan the QR code on the device and follow the onscreen instructions to finish
initial setup.
NOTE : If you access the camera via the Reolink Client, you may click the
Add Device icon and choose the UID option to enter the UID of your camera. The
UID is on the camera body (right below the QR code).
Install the E1 Outdoor Camera
Mount the Camera to the Wall
For outdoor use, E1 Outdoor must be installed upside down for better waterproof performance.
- Pull the button of the security mount and unscrew the bracket to separate the two parts.
- Screw the bracket to the bottom of the camera.
- Drill holes in accordance with the mounting template and screw the security mount to the wall.
- Choose a proper direction of the camera and then align the bracket to the security mount and lock the camera in place by turning anti-clockwise.
NOTE: Use the drywall anchors included in the package if needed.
Mount the Camera to the Ceiling
- Pull the button of the security mount and unscrew the ceiling bracket from the mount.
- Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
- clockwise to lock it in position.
Troubleshooting
Camera is Not Powering on
If your camera is not powering on, please try the following solutions:
- Plug the camera into another outlet.
- Use another 12V power adapter to power on the camera.
- If these won’t work, please contact Reolink Support.
- WiFi Connection Failed During Initial Setup Process
- If the camera failed to connect to WiFi, please try the following solutions:
- Please ensure your have entered the correct WiFi password.
- Put your camera close to your router to ensure a strong WiFi signal.
- Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
- Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
- Set your password using only the characters on the keyboard.
If these won’t work, please contact Reolink Support.
Specifications
Hardware
Display Resolution: 5MP
IR Distance: 12 meters (40 ft)
Pan/Tilt Angle: Horizontal: 355° / Vertical: 50° Power Input: DC 12V/1A
Software Features
Frame Rate: 20fps (default)
Audio: Two-way audio
IR Cut Filter: Yes
General
Operating Frequency: 2.4/5GHz Dual-band Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Size: 84.7×117.8 mm
Weight: 380g
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference re-ceived, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Simplified EU Declaration of Conformity
Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environment safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink Official Store or a Reolink authorized reseller. Learn
more:
https://reolink.com/warranty-and-return/.
NOTE : We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com.
Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
ISED Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>