reolink REO-AG3-PRO Argus 3 Series Smart Wireless Camera with Motion Spotlight User Guide
- June 4, 2024
- reolink
Table of Contents
Reolink Argus 3 Series
Quick Start Guide
What’s in the Box
NOTE:
* Quantity of accessories varies with different camera models that you
purchase.
Camera Introduction
NOTE:
Always keep the rubber plug closed firmly.
Different states of the status LED:
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status
Set up the Camera
Set up the Camera using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play
store.
https://reolink.com/wp-json/reo-v2/app/download
Step 2 Turn on the power switch to power on the camera.
Step 3 Launch the Reolink App, and click the +” button in the
top right corner to add the camera. Scan the QR code on the device and follow
the onscreen instructions to finish the initial setup.
Set up the Camera on PC (Optional)
Step 1 Download and install the Reolink Client Go to
https://reolink.com > Support > App & Client. Step 2 Launch the Reolink
Client, click the ” +” button, Input the UID code of the camera to add It, and
follow the onscreen instructions to finish the Initial setup.
Charge the Battery
It’s recommended to fully charge the battery before mounting the camera outdoors.
Charge the battery with a
power adopter.
I Charge the battery with the Reolink Solar Panel (Not included if you only
purchase the camera).
Charging Indicator:
Orange LED: Charging
Green LED: Fully charged
For better weatherproof performance, always keep the USB charging port covered with the rubber plug after charging the battery.
Install the Camera
Notes on Camera Installation Position
- Install the camera 2-3 meters (7-10ft) above the ground to maximize the detection range of the PIR motion sensor
- For effective motion detection, please install the camera ongulorly.
NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.
Mount the Camera
Rotate to separate the base from the bracket.| Drill holes in accordance with the mounting template and screw the base of the bracket to the wall. Next, attach the other part of the bracket to the base.
NOTE:
Use the drywall anchors included in the package if needed.
Screw the camera to the bracket.| Adjust the camera angle to get the best field of view.| Secure the camera by turning the part on the bracket identified in the chart clockwise.
NOTE:
To adjust the camera angle later, please loosen the bracket by turning the
upper part anticlockwise.
Install the Camera with Loop Strap
Thread the loop strap through the slots and fasten
the strap. It is the most recommended installation method if you plan to mount
the camera to the tree.
Place the Camera on a Surface
If you plan to use the camera indoors and put it on a flat surface, you may place the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth.
Safety Instructions of Battery Usage
Reolink Argus 3/Argus 3 Pro is not designed for running 24/7 at full capacity or around-the-clock live streaming. It’s designed to record motion events and to live view remotely only when you need it. Learn useful tips on how to extend the battery life in this post: haps://support.reolink.com/hc/en- us/articles/360006991893
- The battery is built-in, so do not remove it from the camera.
- Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel. Do not charge the battery with solar panels from any other brands.
- Charge the battery when temperatures are between 0°C and 45°C and always use the battery when temperatures are between -20°C and 60°C.
- Keep the USB charging port dry, clean, and free of any debris, and cover the USB charging port with the rubber plug when the battery is fully charged.
- Do not charge, use or store the battery near any ignition sources, such as fire or heaters.
- Do not use the buttery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any way. If the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it.
- Always follow the local waste and recycle laws when you get rid of the used battery.
Troubleshooting
The camera Is Not Powering on
If your camera is not turning on, please apply the following solutions:
- Make sure the power switch is turned on.
- Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is fully charged.
If these won’t work, please contact Reolink Support
support@relink.com
Failed to Scan QR Code on the Phone
If you cannot scan the QR code on your phone, please try the following
solutions:
- Remove the protective film from the camera lens.
- Wipe the camera lens with a dry paper/towel/tissue.
- Vary the distance between your camera and the mobile phone so that the camera can focus better
- Try to scan the QR code under sufficient lighting.
If these won’t work, please contact Reolink Support support@relink.com
Failed to Connect to WiFi During Initial Setup Process
If the camera fails to connect to WiFi, please try the following solutions:
- Ensure that you have entered the correct WiFi password.
- Put the camera closer to your router to ensure a strong WiFi signal.
- Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
- Change your WiFi SSID or password and make sure that SSID is within 31 characters and your password is within 64 characters.
- Set your password using only the characters available on the keyboard.
If these won’t work, please contact Reolink Support support@reolink.com
Specifications
Video
Field of View:120° diagonal
Night Vision: Up to 10m (33 ft)
PIR Detection & Alerts
PIR Detection Distance: Adjustable up to 10m (33ft) PIR Detection Angle: 100°
horizontal Audio Alert: Customized voice-recordable alerts Other Alerts:
Instant email alerts and push notifications
General
Operating Temperature: -10°C to 55°C (14°F to 131°F) Weather Resistance:IP65
certified weatherproof Size: 121 x 90 x 56 mm Weight (Battery included): 330g
(11.6 oz)
For more specifications, visit httips://reolink.com/.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
This device is acting as slave and operates in the 2.4 GHz (2412 -2462 MHz)
band.
RF Exposure Warning Statements: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
shall be installed and operated with a minimum distance 20cm between the
radiator & body. The operation of this device is restricted to indoor use
only. (W52 band)
Simplified EU Declaration of %. Conformity
Reolink declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed of with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
Simplified the EU Declaration of Conformity responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe
recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink official stores or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not
satisfied with the product and plan to return, we strongly suggest that you
reset the camera to factory default settings and take out the inserted SD card
before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
Statement for IC 2.4G & 5G WIFI & RF
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC The device has been evaluated to
meet general RF exposure requirements. The device can be used in mobile
exposure conditions. The min separation distance is 20cm.
The operation of this device is restricted to indoor use only. (W52 band)
OPERATING FREQUENCY (the maximum transmitted power)
2412-2462M Hz(21.47dBm)
5180-5240MHz(16.09dBm)
5745-5825M Hz(14.47dBm)
Technical Support
If you need any technical help, please contact our support team before
returning the products, support@reolink.com
@ReolinkTech
https://reolink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>