Zaptec HAN_P1 Sense Smart Device For Power Measurement Installation Guide

September 11, 2024
Zaptec

Zaptec HAN_P1 Sense Smart Device For Power Measurement

Mechanical and Installation

  • Dimensions: 58.4mm (H) x 58.6mm (W) x 25.1mm (D)
  • Weight: 70g
  • Altitude: up to 2000m
  • Input cable : 3m Micro USB-B cable (additional power supply)
  • Zaptec Sense HAN : unshielded CAT6 cable
  • Zaptec Sense P1 : custom RJ45-RJ12 cable

General

  • Rated voltage Micro USB-B port: 5VDC
  • Rated voltage RJ45 HAN/P1 port: Check meter specifications
  • Rated current: Check meter specifications
  • Standby power consumption: 1-3m
  • Ambient operating temperature: Not specified

Included in the package

  • A Communication cable
  • B Adhesive magnet sheet for mounting
  • C Double-sided tap

Zapotec Sense HAN only Some energy meters, e.g. Kamstrup, need an external power supply. Regular phone charger 5VDC with Micro USB-B connector can be used.
If Zaptec Sense loses internet connectivity or is disconnected, the charging station will be set to provide minimum power (6A). This can be changed in the Zaptec portal.

The HAN/P1 port on your D energy meter is deactivated by default. Please contact your electricity provider to activate it. Zaptec Sense can be installed when your electricity provider has confirmed that your HAN/P1 port is open.
Zapotec Sense is designed for indoor use.

Installation

  1. Plug Zaptec Sense G into the energy meter’s HAN/P1 port E with the included cable F and wait for at least 3 minutes while the device is booting. Move to the next step when Zaptec Sense starts blinking orange. H
  2. Download the Zaptec app from App Store or Google Play. Create an account or log in.
  3. To install Zaptec Sense, tap the three dots I in the upper right corner of the Dashboard screen and select Install Product.
  4. Scan the QR-code on the back of Zaptec Sense or this manual. Follow the on-screen instructions.
  5. Once the light indicator on Zaptec Sense changes to continuous white, the installation is complete.

Configuration
If you need to change network settings after installation, hold your phone near Zaptec Sense, open the Zaptec app and tap the three dots to configure Zaptec Sense.

Light indicator

Guarantee

Your Zaptec product comes with a five (5) year guarantee at no additional cost. Please find the guarantee document at zaptec.com/guarantee

Technical specifications

Mechanical and installation

Zaptec Sense is designed for indoor use.

General

Connectivity

  • Zaptec Charger AS
  • Vassbotnen 1 4313
  • Sandnes Norway

Made in Norway

zaptec.com
© Zaptec Charger AS 13.05.2024. All rights reserved. MA-00012-D1

FAQ

  • Q: What do I do if Zaptec Sense loses internet connectivity?
    • A: If Zaptec Sense loses internet connectivity, the charging station will be set to provide minimum power (6A). This can be changed in the Zaptec portal.
  • Q: How do I activate the HAN/P1 port on my energy meter?
    • A: The HAN/P1 port on your energy meter is deactivated by default. Please contact your electricity provider to activate it before installing Zaptec Sense.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals