Android Car Navigation User Manual
- June 7, 2024
- Android
Table of Contents
- Android Car Navigation User Manual
- Precautions for use
- Quick operation
- Touch the button to learn
- Local music
- Video playback
- Shown. online news
- Browser
- System Information
- Steering wheel learning
- Brightness setting
- Volume setting
- Bluetooth
- Mirror link
- Logo setting
- Factory setting
- FAQS
- VIDEO
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Android Car Navigation User Manual
Android Car Na vigation User Manual
Car Audio and Video System
Precautions for use
To ensure the safety of you and your car and others, be sure to do the following basic requirements:
- Please read all relevant instructions carefully before using the unit. If the unit is damaged due to improper operation, the warranty will not be available.
- This device is a 12V machine and can only be used on a 12V power supply.
- To ensure safe driving and avoid illegal traffic regulations, do not watch programs or operate the unit while driving.
- To prevent short circuits. Please do not place or leave any metal objects inside the device.
- To avoid short circuits. Do not allow the unit to come into contact with rain.
- Please use this manual according to this manual. Do not open the unit for maintenance. If there is any repair, please go to the professional repair station for repair.
- When the engine is off, do not use the car audio for a long time, otherwise, it will run out of battery power.
- Do not touch or tap the screen with a sharp object.
- Thank you very much for using our Android car navigation system.
Quick operation
- Quick operation after the screen is down,(switch) (notification)
- Click wifi and click the notification again to set the wifi password connection.
- Touch the switch on the screen.
- Original car power amplifier settings.
- Clear the key to memory. (D.Screenshots.
- Bluetooth connection.
- Android settings.
- Set on the machine.
- Video output.
Touch the button to learn
After the five fingers of the palm press the screen for a few seconds, the calibration pops up. Click 1.2.3.4 to set the button to confirm the learning. The first step is to start learning the yellow color, click the power letter to change the yellow color, and click the light board switch machine’s coordinates again. The yellow color of the power letter will disappear, and so on Finally, click the close position to confirm and the setting is successful.
Local music
Click on the main interface “Local Music” to enter the local music interface. This operation is effective when the machine has an SD card or USB interface and the corresponding media file.
- Click on the main interface “Local Radio” to enter the local radio interface
- Click the home interface, then click the other function icon to exit
- Click to clear all stored radio records and perform an automatic search.
- Search the radio up/down. Each radio found will pause the search.
- Where the collection is stored
- Qs Click on the last radio station / next radio station ®. Click here to delete the collection broadcast
- Q. Browse the collection radio
- Switch between FM/AM bands
- Go back to the previous interface
- Automatic search lock sensitivity can be selected between strong/medium.
Video playback
Click the main interface “Video Play” to enter the video interface (support
RMVB / RM / FLV / 3GP / 1080 p HD video) and other video formats.
This operation is effective when the machine has an SD card or USB interface
and the corresponding media file. Click the “All” icon to switch between all /
SD / U disk/file browsing. When the video file is read, the system
automatically plays the file
Shown. online news
Click the main interface “Network News” to enter the network news interface (need to connect to the network), you can receive the latest news of the day at any time. Automatic voice playback
Click the icon to explain
- After entering the homepage interface, click the other function icon to exit.
- browsing the news
- Go back to the previous interface
- Automatic voice pause/playback
- Click on the news list directly to enter detailed news
Browser
Click on the main interface “Browser” to enter the browser interface
- Click on the system status bar above to return to the main interface or return to the upper level
- Click on the “Search or Acquaintance URL,” at the top, pop up the keyboard to enter the URL, click “GO” to enter the page
- Pages collected in the middle of the page can be edited and deleted, and grow to the bank in the middle of the page. You can add urls.
- Return to the upper/lower layer, display the number of currently open pages, click to zoom out to enter the bookmark page in the upper right corner of “+” System settings
System Information
Click ‘Default Settings” to restore the factory settings; click “Screen” to screen calibration interface Android upgrade and MCU upgrade. Android upgrade to the highest version of android; MW upgrade to the highest version of MCU software External audio-video connects related devices to play audio and video files.
Steering wheel learning
The steering wheel learning steps are as follows:
- Press any button on the steering wheel, the interface will display a long press on the steering wheel, and you will not be able to learn without pressing the steering wheel button for a while.
- Click on the screen to learn the docking function
- Click the corresponding function button on the steering wheel and repeat 1/3 steps in sequence until all the control buttons on the steering wheel are completed.
- The implementation conditions of this function:
- Original steering wheel for non-bus control
- The steering wheel key of the original car must be the voltage input control method
Brightness setting
Click the “+” – “” icon to adjust the value
Volume setting
Click the “+” – “icon to adjust the multimedia volume and Bluetooth volume separately.
- Sound settings
- Click the slider to adjust the bass, bass, baritone, treble
- Click on the corresponding icon to set it on rock/custom/classic/ jazz/prop
- Click on the top, bottom, left, right, or click on the center point to adjust the position of the speaker.
- Click the “Default” icon to restore the sound settings parameters to the system defaults
Bluetooth
Click “Bluetooth” on the main interface to enter the Bluetooth connection.
Non-Bluetooth connection: input Bluetooth interface, do not display Bluetooth
connection, will prompt you to ” Please do Bluetooth connection” Bluetooth
device name and password connection, after a successful connection, you can
use Bluetooth mobile phone and Bluetooth music
Mirror link
Mirrored connection is a new type of software. It can be interconnected with
the mobile phone at the same time. Scan the QR code to download the software
on the mobile phone and use it according to the picture prompts.
First, the Android phone enters the settings, find the “developer options”,
different phones, their location is not the same, some mobile phones
It is hidden, you need to enter “About Mobile Phone” and click “Version
Number” for more than 5 times, it will appear “You are already at
In developer mode, you don’t need to do this”
Step 2: After entering the “Developer Options”, open the “Developer Options”
switch and the “USB Debug” switch
The third step: open the mirror connection APP, the mobile phone scans the QR
code to download the APP.
Step 4: The mobile phone data cable can be connected to the machine USB for
normal use.
The Apple mobile phone opens a hotspot and the machine connects to the mobile
phone hotspot signal.
Logo setting
Click on the car settings, select the car logo settings, the built-in LOGO selects the model that matches your own and starts to set the LOGO confirmation.
Factory setting
Password “8888” parameter setting
The car navigation protocol box is a square box connected to the navigation tail line used for data output to realize the information communication between the driving computer and the navigation. More is used in the high car, decoding the original car’s air conditioning display, steer ng wheel control, door opening information, and other functions.
- Ground wire (Black)
- +12v Battery (Yellow)
- +12VAcc Switch (Red)
- Little lamp test (orange-red)
- Parking sensor control wires (brown)
- Steering wheel key control wires(Green and white)
- Steering wheel key control wires (pink)
- Radio antenna power supply (blue)
- Front Right – Speaker (gray/black)
- Rear left – speaker (green/black)
- Front Right + Speaker (gray)
- Rear left + Speaker (green)
- Front left – speaker (white/black)
- Rear right + Speaker (Violet)
- Front left + Speaker (white)
- 16.Rear right – Speaker (Violet/black)
Thank you for your patronage.
The company reserves the right of the final interpretation of this manual Thank you very much for using our onboard navigation products? In order to use. the system correctly, please read this manual and keep it properly before use.
FAQS
Does it fit Mercedes E350 2006?
Yes.
Does this fit 2009 Volkswagen Jetta? Is install kit included?
if your car has a double DIN opening, then A6G2A7PF, as a universal double DIN
Android car stereo, will fit your car 2009 Volkswagen Jetta.
You may need a suitable dash kit and wiring harness (or in some cases, a
CANBUS data interface) to complete the installation. First check with online
or local suppliers for availability of the installation kit specific to your
vehicle.
We recommend you to purchase our one-stop solution S8VW114SD (B09VKSDTKB). It
is from our S8 flagship series, has a much larger screen, and will keep the
OEM-style look of your vehicle.
If you have any further questions or need futher assistance, please email us
at {support@myatoto.com}. Our support team will be happy to provide you with
more detailed answers and information.
Does this fit a 2001 bmw 325ci?
Any double din
Is the internal storage expandable, or is usb only for media playback?
Internal no. External yes.
How to connect to CarPlay with Bluetooth?
You don’t actually use Bluetooth to connect wireless Apple CarPlay. Click on the “Car Link 2.0” icon… it’s red and looks like a phone and a screen connected by a cable. That’s the app the unit uses for wireless Apple CarPlay.
Will factory camera hook to this radio?
As long as the connection match and the signaling is the same.
will this fit on a 2010 Ford E series?
if your car has a double DIN opening, then A6G2A7PF, as a universal double DIN
Android car stereo, will fit your car 2010 Ford E series.
You may need a suitable dash kit and wiring harness (or in some cases, a
CANBUS data interface) to complete the installation. First check with online
or local suppliers for availability of the installation kit specific to your
vehicle.
If you have any further questions or need futher assistance, please email us
at {support@myatoto.com}. Our support team will be happy to provide you with
more detailed answers and information.
How long does does it take to connect to wireless apple carplay? And does it ever drop the connection?
When is your link your phone with CarPlay on the stereo it will do automatically every time you turn on the car with out connecting using wires ,if that is your question
What are the dimensions of the unit that goes into the dash?
the part of A6G2A7PF that goes into the dash measures 178 mm (width) x 100 mm
(height). It is the ISO standard double DIN size. The depth is 102 mm.
If you have any further questions or need futher assistance, please email us
at {support@myatoto.com}. Our support team will be happy to provide you with
more detailed answers and information.
Will this fit a 2010 gmc sierra 2500hd?
if your car has a double DIN opening, then A6G2A7PF, as a universal double
DIN Android car stereo, will fit your car 2010 gmc sierra 2500hd.
You may need a suitable dash kit and wiring harness (or in some cases, a
CANBUS data interface) to complete the installation. First check with online
or local suppliers for availability of the installation kit specific to your
vehicle.
If you have any further questions or need futher assistance, please email us
at {support@myatoto.com}. Our support team will be happy to provide you with
more detailed answers and information.
Well this fit toyota ch_r?
It fit great in my 2009 Toyota Tacoma
Anyone have issues with just the rear speakers? I double checked the wire colors and they are correct?
Check your speakers my wires were broke because the door
Does this unit have a built-in GPS?
Yes, it has a built-in GPS.
Does this unit support Bluetooth?
Yes, it supports Bluetooth.
Does this unit support RDS?
Yes, it supports RDS.
Does this unit support USB?
Yes, it supports USB.
Can you play video with usb?
Yes, use the usb cable that is the one NOT labeled for phones or other Android devices. The cable is labeled DATA or something close to that.
VIDEO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>