THORN ILF AFP2 Large Spaces LED Projector Installation Guide
- August 21, 2024
- THORN
Table of Contents
THORN ILF AFP2 Large Spaces LED Projector
Specifications
| Accessory Type | Frame |
|---|---|
| Compatible with | AREAFLOOD PRO2 Accessories |
| Available Sizes | Small, Medium, Large |
| Weight | See individual accessory specifications below |
Product Usage Instructions
- Installation
- Ensure the power source is switched off before installing the frame accessory.
- Refer to the provided installation instructions in LV, PL, SE, and RU languages for step-by-step guidance.
- Choose the appropriate size of the frame accessory based on your requirements (S, M, L).
- Securely attach the frame to the corresponding AREAFLOOD PRO2 luminaire.
- Safety Instructions
- Replace any cracked protective shield immediately.
- For Class II luminaires, ensure no exposed metal contacts or electrical installations.
- Class I luminaires must be properly earthed for safety.
- Always switch off the mains voltage before working on the luminaire.
- Do not make any modifications to the luminaire as it may void warranty and safety certifications.
- Maintenance
- Regularly check the frame accessory for any damage or wear and tear. Clean as necessary to maintain optimal performance.
FAQs
- Can the frame accessory be used with any other type of luminaire?
- The frame accessory is specifically designed to be compatible with AREAFLOOD PRO2 luminaires and may not be suitable for use with other types of luminaires.
- How do I determine the correct size of the frame accessory to use?
- Refer to the dimensions provided in the manual to select the appropriate size (Small, Medium, Large) based on your luminaire’s specifications.
- What should I do if I encounter a problem during installation?
- If you face any difficulties during installation, refer to the installation instructions in different languages provided in the manual or contact customer support for assistance.
ACCESSORIES
TYPE: AREAFLOOD PRO2 ACCESSORIES
BIRD DETERRENT
PROTECTION GRID
LOUVER
ASSEMBLING INSTRUCTION
- Replace any cracked protective shield.
- Class II luminaires must be installed so that the exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
- WARNING: Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Any modification to this luminaire is forbidden.
- Lighted objects nearer than the minimal distance in the is forbidden.
Horn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement © Thorn Lighting
Read User Manual Online (PDF format)
Loading......