Hunter Industries HC Flow Meter User Guide
- October 27, 2023
- Hunter Industries
Table of Contents
Hunter Industries HC Flow Meter
Detect, monitor, and report critical flow zone data via wired or wireless connection with this robust and simple-to-install flow sensor.
Sensor : Flow
KEY BENEFITS
- Compatible with Hydrawise® enabled HC, HPC, Pro-HC, and HCC controllers
- Provides station-level flow rates and totals
- Sends automatic alerts in the event of high-flow, low-flow, or unscheduled flow conditions
- Flow reports within Hydrawise software can display total system water use and individual station water use for accurate water budgeting and tracking
- Robust brass construction with union fittings for easy installation and removal for winterization
- Analog dial on the face of the meter displays daily flow totals and a leak detector
OPERATING SPECIFICATIONS
- Scaled pulse output is pre-calibrated from the factory based on the size of the meter
- When wired directly to the controller, the meter must be installed with shielded, minimum 18 AWG wire, up to 1,000′ from the controller
- Accuracy: ± 2% of reading at recommended flow
- Warranty period : 2 years
WIRELESS HC FLOW METER BENEFITS
- Add wireless communication to any HC Flow Meter (sensor sold separately)
- Send flow data wirelessly from the sensor to the controller, without the need to run wire or dig trenches
WIRELESS HC FLOW METER OPERATING SPECIFICATIONS
- 500′ range (line of sight) from transmitter to receiver
- Communication frequency: 900 MHz for use in North America
- Transmitter power supply: 3 AA batteries
- Receiver power supply: 24 VAC from host controller
- Warranty period: 2 years
HC-075-FLOW (¾” male thread)
- Height: 31/8″
- Length: 91/8″
- Depth: 31/8″
- Weight: 2.1 lbs
HC-100-FLOW (1″ male thread)
- Height: 35/8″
- Length: 101/4″
- Depth: 31/8″
- Weight: 3.1 lbs
HC-150-FLOW (11/ 2″ male thread)
- Height: 61/4″
- Length: 167/8″
- Depth: 47/8″
- Weight: 14.5 lbs
HC-200-FLOW (2″ male thread)
- Height: 61/4″
- Length: 171/ 2″
- Depth: 47/8″
- Weight: 16.3 lbs
WIRELESS HC FLOW METER
HC FLOW METER SPECIFICATIONS
| HC-075-FLOW | HC-100-FLOW | HC-150-FLOW | HC-200-FLOW |
|---|---|---|---|
| (3/4″) | (1″) | (11/ 2″) | (2″) |
Minimum flow
(GPM) 0.22
| __
0.3
| __
0.88
| __
1.98
Maximum
recommended flow 15
(GPM)
| __
30
| __
66
| __
105
Maximum flow
rate (GPM) 21
| __
34
| __
88
| __
132
Dial reading 1 pulse per 0.1| 1 pulse per 1| 1 pulse per 1| 1
pulse per 1
(U.S. gal) U.S. gal| U.S. gal| U.S. gal| U.S. gal
WIRELESS HC FLOW METER MODELS
Visit hunterindustries.com
RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>