PHILIPS V1 Welcome Eye Connect 3 WiFi Video Doorbell with Camera User Guide

September 11, 2024
Philips

PHILIPS V1 Welcome Eye Connect 3 WiFi Video Doorbell with Camera

Safety instructions

Important!

  • If you are installing this product for someone else, remember to leave the manual or a copy of it with the end user.

Warning

  • The various items should be dismantled by an authorized technician only.

Safety precautions

  • To operate this system in complete safety, installers, users and technicians must follow all the safety procedures described in this manual.
  • Specific warnings and warning symbols are given for items where necessary.

Product installation

For optimal operation, your videophone requires a WiFi connection to work. We recommend that you make sure your WiFi network is accessible where the monitor of your videophone is to be positioned. Your monitor is powered by the 24 Vdc mains adapter included. You can now start installation – next page.

Setting up

Download the Philips Door Connect application onto your smartphone EN from Appstore or Play Store, and follow the instructions.

For more details

This quick start guide indicates the steps involved in setting up your videophone. If you want more a detailed explanation of your videophone’s possibilities, please read the full product manual, available online on the Philips website.

Legal disclaimer

Safety precautions
Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept liability for damage resulting from non-compliance! We will not accept liability for any harm to goods or people caused by improper handling or failure to adhere to safety instructions. This product was manufactured in total compliance with safety guidelines. In order to maintain this status and provide for the best possible conditions of usage, the user must adhere to the safety instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.

  • Only use this product with electrical current in the following ranges: 100-240 volts and 50-60 hertz. Never attempt to use this device at a different voltage.
  • Ensure that all the system’s electrical connections conform to the instructions for use.
  • In commercial establishments, ensure that you adhere to the electrical installation accident prevention regulations.
  • In schools, training facilities, workshops, etc. qualified personnel must be on hand to monitor electronic equipment operation.
  • You must follow the instructions for use of any other devices connected to the system.
  • Please contact an experienced person if you have any doubts regarding equipment operation or safety.
  • Never plug in or unplug electrical equipment with wet hands.
  • When installing this product, check that the power supply cables are not at risk of being damaged.
  • Never replace damaged electrical cables yourself! In this case, remove them and call an expert.
  • The mains supply should be located close to the device and must be easily accessible.
  • An easily accessible cut-off system (switch disconnector, circuit breaker, equivalent system) must be integrated into the building’s wiring installation for the equipment connected to the power grid.
  • Keep a minimum distance around the device to guarantee sufficient ventilation.
  • Ventilation should not be blocked by covering the ventilation opening with an object such as a newspaper, tablecloth or curtain, etc.
  • No open flame source such as a burning candle must be placed on the device.
  • Respect the product’s operating temperature.
  • The device must not be exposed to liquid flow or splashing. Do not place any objects filled with liquid such as vases on the device.
  • This product must be used in compliance with local and national legislation.

FCC/CE Warning

Note : This equipment has been tested and found to be compliant with the limits of a Class B device, according to European standards in force. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment uses and may emit radio frequency energy and, if not fitted and used according to the instructions, may cause interference to radio communication. There is no guarantee, however, that interference will not occur in a particular system. If this equipment causes interference to radio or TV reception, which can be established by starting and stopping it, users are encouraged to try to correct the interference by one of the following methods:

  • Redirect or move the receptor antenna
  • Increase the distance between the equipment and the receptor
  • Connect the equipment to a socket belonging to a different circuit from the one to which the receptor is connected

Declaration of conformity
AVIDSEN, undersigned, states that radio equipment such as WelcomeEye Connect 3 is compliant with directive 2014/53/EU. The full text of the EU declaration of compliance is available at the following address: www.avidsen.com.

Technical support – Warranty
This product is guaranteed for parts and labor in our workshops. The warranty does not cover consumables (batteries, etc.) and damage caused by misuse, improper use, improper installation, external intervention, damage due to physical or electrical shocks, dropping or atmospheric phenomena.

  • Do not open the device, as this will void the warranty.
  • Clean with a soft cloth only, no solvents. The warranty is void if parts have been dismantled. Before cleaning, disconnect the equipment or switch it off at the mains.

Warning : Do not use any carboxylic acid, alcohol, or similar chemicals on the product. In addition to damaging your device, the fumes are also hazardous to your health and are explosive. Do not use any tool that can conduct voltage (wire brush, sharp tool, etc.) for cleaning.

The receipt or invoice is proof of purchase date.
Contacts and opening hours of our technical support centres are available if necessary on the website www.philips.com.

For help, visit: www.philips.com/support 2024©Avidsen. All rights reserved. Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under licence. This product was manufactured and is sold by AVIDSEN SAS, and AVIDSEN SAS is the sole guarantor of the product.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals