BDS1709FPE 3 Inch Lift Kit With Fox 2.5 Performance Elite Coil Over Installation Guide
- September 11, 2024
- BDS
Table of Contents
BDS1709FPE 3 Inch Lift Kit With Fox 2.5 Performance Elite Coil Over
Product Information
Specifications
- Product: [Product Name]
- Model: [Model Number]
- Dimensions: [Dimensions]
- Weight: [Weight]
- Material: [Material Used]
Product Usage Instructions
Pre-Installation
Before installing the product, measure the distance from the
WHEEL AXLE CENTER up to the FENDER LIP at the specified
locations:
- Left Front: __
- Right Front: __
- Left Rear: __
- Right Rear: __
Note: These ride heights will be required if
you have any concerns after installation. Please be prepared to
provide these to Technical Support.
Installation
- [Step 1]
- [Step 2]
- [Step 3]
Maintenance
To ensure optimal performance, regularly check and adjust the
product as needed. Refer to the user manual for maintenance
guidelines.
FAQ
Q: What should I do if the ride heights are not within the
specified measurements?
A: If the ride heights do not meet the specified measurements,
contact Technical Support for assistance in adjusting the
product.
Q: How often should I check the ride heights
post-installation?
A: It is recommended to check the ride heights periodically,
especially after any significant driving or load changes.
pre installation
Measure from the WHEEL AXLE CENTER up to the FENDER LIP
Left Front__ Right Front__ Left Rear__ Right
Rear___ Left Front__ Right Front__ Left Rear__
Right Rear__
FENDER LIP
WHEEL AXLE CENTER
**These ride heights will be required if you have any ride height concerns
after installation. Please be prepared to provide these to Technical Support.