BDS Suspension BDS1602FS 4 Inch Lift Kit With 4 Link Installation Guide
- August 10, 2024
- BDS Suspension
Table of Contents
BDS1602FS 4 Inch Lift Kit With 4 Link
Product Information
Specifications:
- Product: Suspension System
- Usage: Vehicle ride height adjustment
Product Usage Instructions:
Pre-Installation Steps:
Before installing the suspension system, measure the following
distances from the WHEEL AXLE CENTER up to the FENDER LIP on your
vehicle:
- Left Front: ___
- Right Front: ___
- Left Rear: ___
- Right Rear: ___
These measurements are crucial for any ride height concerns
after installation. Make sure to have these measurements ready to
provide to Technical Support if needed.
Installation Steps:
-
Follow the manufacturer’s instructions for installing the
suspension system on your vehicle. -
Ensure all components are securely fastened and aligned
correctly. -
Double-check the ride heights after installation using the
provided measurements.
Maintenance:
Regularly inspect the suspension system for any signs of wear or
damage. Adjust ride heights as needed to maintain optimal
performance.
Frequently Asked Questions (FAQ):
Q: Why are the ride height measurements important?
A: Ride height affects vehicle handling,
stability, and overall performance. Correct measurements ensure
proper alignment and suspension function.
Q: Can I adjust the ride height after installation?
A: Yes, you can adjust the ride height based on
your preferences or specific driving conditions. Refer to the user
manual for guidance on adjustments.
pre installation
Measure from the WHEEL AXLE CENTER up to the FENDER LIP
Left Front__ Right Front__ Left Rear__ Right
Rear___ Left Front__ Right Front__ Left Rear__
Right Rear__
FENDER LIP
WHEEL AXLE CENTER
**These ride heights will be required if you have any ride height concerns
after installation. Please be prepared to provide these to Technical Support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>