BDS1643FS 4 Inch Radius Arm Drop Bracket Kit Installation Guide
- August 8, 2024
- BDS
Table of Contents
BDS1643FS 4 Inch Radius Arm Drop Bracket Kit
Product Information
Specifications:
- Product Name: Wheel Alignment Kit
- Model Number: 12345
- Manufacturer: XYZ Corp
Product Usage Instructions:
Pre-Installation:
1. Measure from the WHEEL AXLE CENTER up to the FENDER LIP for
each wheel location.
| Location | Measurement (inches) |
|---|---|
| Left Front | __ |
2. These ride heights will be required if you have any ride
height concerns after installation. Please be prepared to provide
these to Technical Support.
FAQ:
Q: What should I do if I have ride height concerns after
installation?
A: Measure the ride heights from the WHEEL AXLE CENTER up to the
FENDER LIP for each wheel location and provide these measurements
to Technical Support for assistance.
pre installation
Measure from the WHEEL AXLE CENTER up to the FENDER LIP
Left Front__ Right Front__ Left Rear__ Right
Rear___ Left Front__ Right Front__ Left Rear__
Right Rear__
FENDER LIP
WHEEL AXLE CENTER
**These ride heights will be required if you have any ride height concerns
after installation. Please be prepared to provide these to Technical Support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>