eeese Carl 25L Dehumidifier And Air Purifier User Manual

eeese Carl 25L Dehumidifier And Air Purifier

Thank you for choosing this product.
Please read this instruction manual before using it.

Safety instructions

Warning This appliance is intended for indoor use only in private homes. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or other personal injury or damage.

Power cord

• Do not try to unplug the power cord from the wall socket.
• Do not place heavy objects on the power cord in order to avoid safety risks.
• Do not attempt to replace the power cord, contact the authorised service workshop for repair.
• The socket must be grounded and properly secured.
• Do not connect the appliance to an overloaded extension lead.
• Do not use the appliance if the power cord can- not be securely fastened in the plug socket.
• Do not touch the plug with wet hands in order in order to avoid electric shock.
• Unplug it during lightning storms.

Location

• Do not place flammable and explosive objects around the appliance in order to avoid fire.
• Do not use the appliance in locations with a draught.
• Place the appliance on a stable, flat surface.
• Do not use the appliance in swimming pool or similar facilities in order to avoid safety hazard.

During use

• Turn off the power and unplug the power cord before moving the device.
• Children should be supervised to ensure that they do not play with the appliance.
• The apparatus must not be knocked over or subjected to impact or shock in order to avoid malfunction.
• Do not place your hands on the air outlet in order to avoid damage or malfunction.

Parts list

1. Installed HEPA filter
2. Tri-color Humidity Light
3. Control Panel
4. Front Cover
5. Handle
6. Air Outlet
7. Water Tank
8. Power Cord
9. Castors
10. Power Cord Bracket
11. Drainage Outlet
12. Air Inlet Gril
13. Drainage Pipe Control Panel
14. Laundry Drying Indicator
15. Manual Dehumidifying Indicator
16. Air Purifying Indicator
17. Auto dehumidifying Indicator
18. Humidity Level
19. Timer Button
20. WiFi Indicator
21. Work Indicator
22. Full Tank Indicator
23. Defrost Indicator
24. On/Off Button
25. Auto Button/Child Lock Button
26. Up and Down Button
27. Timer Button
28. Mode Button Drainage
29. Drainage Outlet Plug
30. Drainage Pipe

Before operation

• Place the dehumidifier in an upright position on a stable, flat surface.
• Ensure the dehumidifier is at a safe distance at least 50 cm away from a wall or furniture.
• Supply power should be in correspondence with the value on the nameplate, power outlet needs to be grounded.
• Ensure the tank is correctly fitted, if the tank is full or not in place, the tank full light comes on and the dehumidifier will stop working.

Continuous Drainage
In general, water will be collected by tank, if you want continuous drainage, please do steps as follows (refer to section 2 “Part List”)

• Insert the drainage pipe with 19 mm inner diameter through the drainage outlet.
• Put the water tank back in place.

Operation Instructions

Desired setting will be confirmed 3s after the operation.
Tri-color light will reflect the environment humidity:
Red light: RH% ≥ 65% // Green light: 55% ≤ RH% ≤ 65% // Yellow light: RH% < 55%.

Switch On / Switch Off The Unit [ Power button ]

Connect to the power supply and press the power button (A) once to turn on the unit.
By default the unit runs on manual continuous dehumidifying (B) with low fan speed. The working indicator will be on (C).

Press the power button to turn off the unit, it will stop working, fan will work for some seconds to blow out the hot air inside the unit.

Auto Shut-off Timer Function [ Timer button ]

Press the timer button (A) to select your preferred timer hour from 00-24-00 for automatic shut off setting by each press.

Auto timer off setting will be cancelled if the timer button is pressed 2 times in 5 seconds.
Auto timer off setting will be cancelled if the unit is switched off and switch on again.

Humidity Setting [ Up and Down buttons ]

Press the humidity setting buttons (A or B) to select your preferred humidity from CO- 30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-CO. CO means continuous dehumidifying regardless of ambient humidity.
The display C shows actual humidity in the room. Pressing A or B shows what the unit is set to dehumidify.

Auto Dehumidifying Function [ Auto button ]

Press the auto button (A) to select the Auto Dehumidifying mode, the unit runs automatically accordance to the ambient humidity detected below:

Up/Down buttons cannot be used with auto dehumidifying function

Multifunction [ Mode button ] Laundry Drying Mode

Press the mode button (A) to select Laundry Drying mode (B), the unit runs in continuous dehumidification with high fan speed for 6 hours and then switches off automatically.
The Timer will not work together with the laundry mode.

Air Purifying Mode

Press the mode button (A) to select Air Purifying mode (B), the unit runs with fan speed without dehumidifying.

The light on the unit will be on, even if the unit is in air purifying mode. The light reflects the environment humidity. Thus, help you decide if you need to change to dehumidifying mode or if you need to humidify.

Light modes:
Red light: RH% ≥ 65% // Green light: 55% ≤ RH% ≤ 65% // Yellow light: RH% < 55%.

Manual Mode

Press the mode button to select Manual mode, the unit runs by default continuous dehumidifying (B) with low fan speed.
At Manual mode all buttons are enabled to use.

WiFi Function [ Timer button-2 seconds]

Press the Timer (A) button for 2s to activate WiFi function and enter the network mode, during the network configuration, the WiFi indicator flash quickly, after WiFi connected the indicator is on (B).

Detailed wifi operation, please refer to the manual ”Smart Connection Operation Guide”.
When the machine is in network mode, press the timer button for some seconds to disconnect the WiFi connection.

Safety Childlock Function [ Fan Speed button-2 seconds ]

Press the Auto button (A) for 2s to lock all buttons with a beeping sound, the same operation can unlock it.
Safety childlock function can be set at standby mode and working mode but can’t be activated when water tank is full.

Low Temperature Defrost Indicator

When the ambient temperature is too low, the dehumidifier will enter into defrost mode (A), the unit runs with high fan speed without dehumidifying and the work indicator starts flashing.

Auto Shut off with Water Tank Full Indicator

The unit will enter into standby mode when the water tank is full (A) or when the water tank is not installed properly. After emptying the tank, or installing the water tank properly, the unit will go on to the previous mode.
Except for the power button, all other buttons are invalid.

Memory Function

• When unplugged directly or power is cut, then reconnect to the power supply, the dehumidifier will run with the mode prior to the shutdown. The timer setting will be kept.
• Press the power button to switch off the dehumidifier, and then press the power button to switch it back on. The dehumidifier will run with the mode prior to the shutdown. The timer setting will be cancelled.
• Switch off the dehumidifier and unplug the power cord, then reconnect the power supply and switch on the dehumidifier. It will run in factory preset mode.

Cleaning

IMPORTANT! The HEPA filter needs to be replaced once a year. This guarantees sufficient dehumidifying and air purifying efficiency.
When the appliance is used regularly, the filter grill can become clogged with dust and particles. Therefore, the filter grill should be cleaned at least every two weeks. Follow these steps:

1. Turn off the unit and unplug it before cleaning.
2. Clean the cabinet with a soft, dry cloth. If the unit is very dirty, use a mild detergent. Wipe the dehumidifier with a slightly damp cloth. Never spray water on the unit.
3. Remove the filter grill (B) and clean with a vacuum cleaner or soapy water no hotter than 40°C. The HEPA (A) cannot be cleaned and needs to be replaced once a year.
4. Rinse and dry the filter grill completely before installing back to the device.

Storage

If the unit will not be used for an extended period, do the following:

1. Unplug the unit.
2. Clean the air filter with a vacuum cleaner.
3. Make sure the device is in perfect condition so that it is safe to use again after a long storage period.
4. Store the unit in appropriate packaging.
5. Store the unit in a dust-free place and out of direct sunlight. It is recommended to cover it with a piece of plastic.

Display Error Codes

Please contact your local distributor if any of the error codes below appears.

normally.
2| E2| Humidity sensor error| Flashs every 30 seconds| Dehumidifier works normally, but can’t set the humidity.
3| L3| Air inlet temperature is too high ≥42ºC| Slow flash L3| Compressor stops working, fan works at low fan speed.

If the dehumidifier temperature decreases below 40ºC, the dehumidifier will start working normally.

5| L4| Air inlet temperature is too low ≤0ºC| Slow flash L4| Compressor stops working, fan works at low fan speed.

If the dehumidifier temperature increases above 2ºC, the dehumidifier will start working normally.

Troubleshooting

Before contacting technical Support, check the following.

The device does not work

| The power is not connected| Insert the plug into the wall outlet
The water tank is full| Empty the tank
The tank has not been replaced correctly| Replace the tank

Water removal capacity is too low

| Runtime is too short| Be patient and wait
Ambient temperature or humidity is too low| It is normal that the device does not dehumidify in these conditions

The device works, but reduces the relative humidity insufficiently

| The room is too big| We recommend using a dehumidifier with a greater capacity
There is too much ventilation| Reduce ventilation (e.g. close windows and shut doors)
The air filter is clogged| Clean the air filter grill or change the HEPA filter
Set humidity is higher than the ambient humidity| Set the humidity lower than ambient humidity
Dehumidifier is blowing out warm air| The dried air is passed over heating coils before it is blown into the room as part of the dehumidifying process|

This is normal, a dehumidifier is not an air cooler

The display is not showing the humidity set point| The display shows the room relative humidity not the set point| Press the humidity control button once to see the target relative humidity

Water on floor

| There is residual water in tank, and the device is lurched too much by moving| Be careful when moving the tank
The dehumidifier is noisy| The air filter is blocked or the device is on an uneven surface| Clean the filter or put the device on a flat surface

IMPORTANT!
Please do not try to repair the dehumidifier by yourself to avoid any risk.

Technical specifications

Smart Connection Operation Guide

APP Binding Device
Search an APP platform for “TuyaSmart” or scan the following QR code to download the APP.

Step One
Make sure the phone is connected to the WIFI at home, and turn on the Bluetooth device, tap the upper right corner of the home page + to add device.

Step Two
Follow the guide to select the device to be configured, then enter the WiFi password.

Step Three
Complete the connection to set the dehumidifier with APP.

Adding Device Manually

Step One
Tap Add Device on the home page or + in the upper right corner to go to the Add Device page.

Step Two
Confirm the indicator rapidly blink and enter the WiFi password.

Step Three
Complete the connection to set the dehumidifier with APP.

Service
If you have any questions or need more information, please feel free to call
Customer service on +45 6916 3200
If you need service or to make a warranty claim, you must create a case directly in our support system. Go to the home page under SUPPORT.

Warranty

Limited warranty
We guarantee that all parts are free of defects in materials and workmanship for a period of two years from the date of purchase. The compressor has 6 years of guarantee from the date of purchase. The warranty covers only material or manufacturing defects that prevent the product from being able to be installed or operated in a normal way. Defective parts will be replaced or repaired.
The warranty does not cover transportation damage, any use other than what is intended, damage caused by incorrect assembly or improper use, damage caused by impact or other error, damage caused by frost cracking or by improper storage.
The warranty becomes void if the user modifies the product.

The warranty does not include product-related damage, property damage or general operational loss.
The manufacturer’s liability cannot exceed the repair or replacement of defective parts and does not include labour costs to remove and reinstall the defective part, transportation costs to and from the service centre, and all other materials necessary to carry out the repair.

This warranty does not cover failure or malfunction as a result of the following:

• If the unit is not installed, operated or maintained in accordance with the instruction manual supplied with the unit.
• The workmanship of any installation of the unit.
• Misuse, alteration, accident, fire, flood, lightning strike, rodents, insects, negligence or unforeseen events.
• Use of non-factory authorised parts or accessories in conjunction with the product.

Limitation of liability
This is the only warranty provided by the manufacturer. No one is authorised to make any other warranties on our behalf.
This warranty is in lieu of all other warranties, expressed or implied, including but not limited to any implied warranty of fitness for a particular purpose and saleability. We expressly disclaim any liability for consequential, incidental, indirect, or consequential damages resulting from any breach of the express or implied warranties.

This warranty gives you specific legal rights, which may vary by country.

Complaints
In the event of any warranty claim a valid purchase receipt must be presented. Read about making warranty claims in the SERVICE section.

eeese air care info@eeese-aircare.com
Web: eeese-aircare.com MV-2506-01-2023

References

• Indoor climate products for a healthier home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>