ZEBRONICS ZEB-ALPINE 1 4.1 Speaker User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-ALPINE 1 4.1 Speaker User Manual
Introduction
Thank you for purchasing the ZEB-ALPINE 1
4.1 Speaker. Please read the user manual carefully before usage & save it for
future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
Features
4.1 Channel Speaker
Wireless BT/USB/AUX/FM/mSD
LED Display
Remote Control
Wall Mountable
Glossy & Matt Finish
Specifications
Output power (RMS)
Subwoofer : 20W
Satellite : 10W x 4
Total : 60W
Driver size
Subwoofer : 10.16 cm
Satellite : 7.62 cm x 4
Impedance
Subwoofer : 40
Satellite : 30
Frequency response : 60Hz – 18kHz
S/N Ratio: 72dB
Separation : > 38dB
File format
support (USB/mSD): MP3 / WAV / WMA
Line input : 2ch RCA
Max. supported
memory size : 32GB (USB/mSD)
FM frequency range : 87.5 MHz-108 MHz
BT name : ZEB-ALPINE 1
BT Range : 10 Meters (Without Obstacles)
BT version : 5.0
Product dimension (W x D x H)
Subwoofer : 130 x 200 x 215 mm
Satellite : 90 x 60 x 145 mm
Net. weight
Subwoofer : 1.66 kg
Satellite : 290 g x 4
Total: 2.82 kg
Package Content
Subwoofer: 1 U
Satellite: 4 U
Remote: 1 U
Input Cable: 1 U
QR Code Guide: 1 U
Control Panel Description
Back Panel Description
Remote Control
Power: Standby ON/OFF
Numeric Pad (0-9) : To select direct tracks from USB/mSD and to select
two digits and above, by consecutively pressing
Vol+: To increase the volume
Prey : To select the previous songs in BT/USB/mSD or channels in FM mode
Vol-: To decrease the volume
RPT: To Switch between REP ALL tracks or REP 1 track
Mode: Mode Selection(BT/AUX/USB/mSD/FM)
EQ: Equalizer
Play/Pause: To Play/ Pause for current song & FM Scan (Press & Hold)
Next : To select the next songs in BT/USB/mSD or channels in FM mode
Bass + : To increase the bass
Bass-: To decrease the bass
Treble + : To increase the treble
Treble-: To decrease the treble
Mute: To Mute / Unmute for currently playing song
General Instructions
BT Mode:
Switch the speaker to BT mode, Scan for nearby BT devices in your device. Tap
on “ZEB-ALPINE 1” to connect.
USB/mSD Mode:
Insert the USB/mSDflash drive to the speaker. The speaker will detect the
USB/mSD and the audio files from flash drive will be played automatically.
(This mode isn’t selectable on the speaker or remote control unless a USB/mSD
flash drive is connected). Ensure that your USB/mSD flash drive contains
MP3/WAV/WMA files (other file types not supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, press &hold the “Play / Pause”
button in the remote to scan for the available FM channels. Once the scanning
is done, the scanned channels will begin to play. The next button or previous
button in the remote can be used to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source.
The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>