tp-link WA855RE Wi-Fi Range Extender Installation Guide

tp-link WA855RE Wi-Fi Range Extender

Specifications :

• Product: Range Extender
• Manufacturer: TP-Link

Product Usage Instructions

Power On:
Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Set Up:

Method 1: Via the WPS Button

1. Activate the WPS function on your router by pressing the WPS button.
2. Within 2 minutes, press the WPS button on the extender for 1 second. The RE LED should change from blinking to solid on, indicating a successful connection.

Method 2: Via the Tether App

1. Get the up-to-date Tether app from the Apple App Store or Google Play, or scan the QR code.
2. Launch the Tether app, log in with your TP-Link ID, and select Range Extender.
3. Follow app instructions to complete the setup. The RE LED should turn solid on, indicating successful connection to your router.

Method 3: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network TP-Link_Extender.
2. Visit http://www.tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.

Relocate:

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone.
2. Wait for about 2 minutes until 3 or more LEDs light up. If not, relocate the extender closer to the router for better signal quality.

Access Extender Settings:
After setup, you can access extender settings via the Tether app by connecting your smartphone to the extender’s or router’s network, launching the Tether app, and selecting your extender.

FAQ:

• Q1: What should I do if I cannot find my device on the Tether app?
  If you cannot find your device, please refer to the FAQ section for troubleshooting tips.

• Q2: What should I do if the RE LED does not turn solid on during setup?
  If the LED does not turn solid on, please refer to the FAQ section for troubleshooting tips or try alternative setup methods.

Quick Installation Guide
Range Extender

Setup with videos
Scan the QR code, or visit https://www.tp-link.com/support/setup-video /#range-extenders
Images may differ from your actual product

Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Note : For safety, only plug the extender in the direction as shown below.

Set Up

Method 1: Via the WPS Button

1. Activate the WPS function on your router by pressing the WPS button.
   Note: If you don’t know how to do, refer to your router’s user manual, or you can use other methods to set it up.

2. Within 2 minutes, press the WPS button @ on the extender for 1 second. The RE LED should change from blinking to solid on, indicating a successful connection.

3. Done. You can connect to the extender’s Wi-Fi.

   • Extended Network Name: Router’s network name with _EXT at the end
   • Password. Same as vour router

Method 2: Via the Tether App

1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.

2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.

3. Tap the button and select Range Extender.
   Notes:
   

   • If you cannot find your device, please refer to FAQ > Q1.
   • Due to Tether app updates, your actual user interface and pathway may differ from those depicted here.

4. Follow app instructions to complete the setup. The RE LED should turn solid on, indicating successful connection to your router.
   Note: If the LED does not turn solid on, please refer to FAQ > Q2.

Method 3: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network TP-Link_Extender.
2. Visit http://www.tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.

Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until 3 or more LEDs light up. If not, relocate the extender closer to the router to achieve better signal quality.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to find Location Assistant, or simply scan the QR code to visit https://www.tp-link.com/support/faq/3103/ .

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect main network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://www.tplinkrepeater.net  the address bar, and log in.
3. View or change extender settings as needed.

LED Explanation

Blinking

| The extender is connected or not connected to your router’s wireless network.

WPS connection is in progress.

Wireless| On/Off| The extender’s wireless function is enabled or disabled.
Power| On/Off

Blinking

|

• The extender is on or off.
• The system is starting up or  firmware upgrade is in progress.

(Signal Strength)| On/Off| Indicates the Wi-Fi connection between the extender and the router. More lit LEDs indicates a better signal strength.

FAQ (Frequently Asked Questions)

Q1. What should I do if the Tether app cannot find my device during setup?
Try another method by following the steps below:

1. Connect your smartphone to the extender’s network TP-Link_Extender.

2. Launch the Tether app, and select your extender.

   • Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.

3. Follow app instructions to complete the setup.

   • If you are still having problems, contact our technical support.

Q2. What should I do if the RE LED doesn’t turn solid on after completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your main router during the configuration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
• If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
• Try setting it up via the WPS button.
• Reset the extender and go through the configuration again.
  • If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

• With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.

If you need more setup help, please visit https://www.tp- link.com/support/faq/3074/, or simply scan the QR code.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca
For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

References

• Trying to Configure the Range Extender? | TP-Link
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• How to place your wireless Range Extender for optimal reception and performance | TP-Link Australia
• Support Videos | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>