snap one WB-820-IPVM-2 20A IP Power Conditioner Instruction Manual
- September 7, 2024
- Snap One
Table of Contents
snap one WB-820-IPVM-2 20A IP Power Conditioner
Product Information
Specifications :
- Model: WB-820-IPVM-2
- Power Cord Rating: 20A
- Bonding Point Wire Accommodation: Minimum 12 AWG
Product Usage Instructions
-
Cleaning:
Clean the product using a dry cloth only to avoid any damage. -
Power Cord Safety:
Ensure the power cord is not walked on or pinched, especially at plugs and receptacles. -
Power Disconnect:
To disconnect unit power, remove the power cord from the appliance coupler or turn off the circuit breaker. Ensure the circuit breaker is easily accessible. -
Short-Circuit Protection:
This product relies on the building’s installation for short-circuit protection with a maximum rating of 20A. Ensure proper grounding if connecting rooftop devices like satellite dishes. -
Bonding Point:
The bonding point can be used to provide a common ground to other equipment. Use minimum 12 AWG wire and appropriate hardware for connections. -
Object Insertion:
Avoid pushing objects into cabinet slots to prevent contact with dangerous voltage points.
FAQs :
-
Q: What should I do if the product encounters a short-circuit?
A: If a short-circuit occurs, immediately disconnect the power source and contact customer support for further assistance. -
Q: Can I use a damp cloth for cleaning?
A: No, only use a dry cloth for cleaning to prevent any damage to the product.
Regulatory Compliance & Safety Information for Model WB-820-IPVM-2
Electrical Safety Advisory
Important Safety Instructions
Read the safety instructions before using this product.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. Unplug this apparatus during lightning storms or when unused for long periods of time.
-
To completely disconnect unit power from the AC mains, remove the power cord from the appliance coupler and/or turn off the circuit breaker. To reconnect power, turn on the circuit breaker following all safety instructions and guidelines. The circuit breaker shall remain readily accessible.
-
This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A.
-
WARNING – Power Sources, Grounding, Polarization
This product requires a properly grounded outlet for safety. This plug is designed to be inserted into a NEMA 5-15 (three-prong grounded) outlet only. Do not force the plug into an outlet that is not designed to accept it. Never dismantle the plug or alter the power cord, and do not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have a question about grounding, consult your local power company or qualified electrician.
If a rooftop device such as a satellite dish connect to the product, ensure that the devices’ wires are also properly grounded.
The bonding point can be used to provide a common ground to other equipment. This bonding point can accommodate minimum 12 AWG wire and should be connected using the required hardware specified by the other bonding point. Please use termination for your equipment in accordance with the applicable local agency requirements. -
Notice – For indoor use only, Internal components are not sealed from the environment. The device can only be used in a fixed location such as a telecommunication center, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person. Suitable for installation in information technology rooms in accordance with Article 645 of the National Electrical Code and NFP 75.
-
This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers, and microwave ovens if placed in close proximity.
-
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
-
WARNING – No user serviceable parts inside. If the product is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit and consult the warranty section of the owner’s manual.
-
CAUTION: The Optical Transceiver used with this product should use UL listed, and Rated Laser Class I, 3.3 Vdc.
The lightning flash and arrow head within the triangle is a warning sign
alerting you of dangerous voltage inside the product
Caution: To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service
personnel.
The exclamation point within the triangle is a warning sign alerting you of
important instructions accompanying the product.
See marking on bottom / back of product
Warning!: To reduce the risk of electrical shock, do not expose this apparatus
to rain or moisture
Save these instructions
Compliance of this equipment is confirmed by the following label that is placed on the equipment:
USA & Canada Compliance
FCC Part 15, Subpart B & IC Unintentional Emissions Interference
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Canada Warning Statement:
CAN ICES-003 (B)/NMB-003(B)
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
Recycling
Snap One understands that a commitment to the environment is essential for
a health life and sustainable growth for future generations. We are committed
to supporting the environmental standards, laws, and directives that have been
put in place by various communities and countries that deal with concerns for
the environment. This commitment is represented by combining technological
innovation with sound environmental business decisions.
About this Document
Copyright © 2023 Snap One All rights reserved.
1800 Continental Blvd. Suite 200-300 • Charlotte, NC 28273 866-424-4489 • snapone.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>