snap one AN-220-RT Single WAN Multi Gigabit VPN Router Instruction Manual

June 17, 2024
Snap One

snap one AN-220-RT Single WAN Multi-Gigabit VPN Router

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
PRODUCT

Specifications

  • Model: Araknis 220 Router
  • Features: Multi-Gigabit WAN and LAN port, VPN Support, QoS, VLANs, Port Forwarding

Welcome to Araknis Networks™
Thank you for choosing our new line of Araknis 220 Routers. With Multi-Gigabit WAN and LAN port, VPN Support, and advanced networking functionality (QoS, VLANs, port forwarding), these routers are top of the line and meant for some serious networking applications.

Features

  • Multi-mounting design
  • 1× 2.5 Gigabit WAN port
  • 1× 2.5 Gigabit LAN portl
  • Fanless
  • OvrC enabled
  • Embedded OvrC Pro Hub

Product Usage Instructions

Unboxing

Upon unboxing, ensure you have received the following items:

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-1

  • Router
  • Rubber feet (4)
  • Rack-mount kit
  • Documentation QR card
  • Structured wiring mounting hardware
  • VersaPlate mounting hardware
  • Wall mount hardware
  • Power Supply

Installation

you can install the router in the following ways:

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-2

  • Rackmount
  • Wall mount
  • Shelf mount

Ensure it is mounted less than 2m (6.6′) to thick plywood or a concrete wall using appropriate hardware.

Caution: Do not stack other equipment on top of the router to avoid possible interference or damage.

  • Structured wiring installation
  • VersaPlate installation

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-2

Connections

Caution: Power off all other network devices before connecting the router.

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-4

Follow these steps to make connections:

  1. Power input – Connect the supplied power cable.
  2. LAN port – Connect a client device such as a network switch, computer, etc.
  3. WAN port – Connect the internet gateway (modem).
  4. Console port – Not currently in use.
  5. Reset button – Refer to LEDs & reset procedures.

Connect the included power supply to the router after making all other network connections.

LEDs & reset procedures

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-4

LED LED State Description
Power On Router is powered on
Off Router is powered off

2.5 Gbps

| On| Connection speed is 2.5 Gbps
Off| Connection speed is 10/100/1000

Mbps


Link/Act

| On| A device is connected to the port
Blinking| Packets are running through the

port

Off| No device is connected to the port

Reset procedures

The reset button is on the back of the router

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-4

Reset button action

| Front

LED State

|

Description

---|---|---
Hold the reset button for 1-9

seconds

| Blinking slowly| Restarts the router
Hold the reset button for 10-19

seconds

| Blinking

moderately

| Resets the username and

password*

Hold the reset button for 20 or

more seconds

| Blinking

rapidly

| Factory defaults the router

The Password Reset function must enabled in the router’s local interface for this to work.

Configuration

Araknis routers can be configured through OvrC or the local interface. The local interface is accessible using OvrC’s WebConnect feature, or typing the router’s default IP address, 192.168.1.1, into your browser’s address bar.

Configuring the router in OvrC
OvrC provides remote device management, real-time notifications, and intuitive customer management, right from your computer or mobile device. Setup is plug- and-play, with no port forwarding or DDNS address required.

To add this device to your OvrC account:

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-7

  1. Connect the router to the internet
  2. Log into OvrC (www.ovrc.com)
  3. Create a customer in OvrC or select an existing one.
  4. Click the Add Device button, then enter the router’s MAC address and Service Tag.
  5. Click the WebConnect icon to connect to the router’s local interface.

Logging in to the local interface

  1. Log into the AP using the default credentials:
    Username araknis
    Password araknis

  2. You must update the password after the initial login.

Pro Tip: Strong passwords are long and unrelated to the client’s public details. For example, the pepperoni pizzas is stronger and easier to remember than P@ssword or the smiths

Next steps

snap-one-AN-220-RT-Single-WAN-Multi-Gigabit-VPN-Router-
FIG-8

Click on Settings to expand configuration options, such as:

  • System — Configure the System name, IP address, time zone, and Daylight Saving Time.
  • WAN — Configure the WAN connection type, speed, and DNS servers.
  • LAN — Configure the default DHCP server settings and/or add another DHCP server for a VLAN

Technical Support

For chat and telephone, visit snp1.co/techsupport, Email: TechSupport@SnapOne.com. Visit snp1.co/tc for discussions, instructional videos, news, and more.

Warranty and Legal Notices

Find details of the product’s Limited Warranty and other resources such as regulatory notices and patent and safety information, at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489.
Copyright© 2023, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.
230615
200-AN-220-RT_QSG-A

Frequently Asked Questions

Q: How do I reset the router?

A: To reset the router, follow these steps based on the duration of holding the reset button:

  • Holding the reset button for 1-9 seconds: Restarts the router.
  • Holding the reset button for 10-19 seconds: Resets the username and password.
  • Holding the reset button for 20 or more seconds: Factory defaults the router.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals